#
VERSION = 2013
-PATCHLEVEL = 01
+PATCHLEVEL = 04
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
-# Set shell to bash if possible, otherwise fall back to sh
-SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
- else if [ -x /bin/bash ]; then echo /bin/bash; \
- else echo sh; fi; fi)
-
-export HOSTARCH HOSTOS SHELL
+export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
# load other configuration
include $(TOPDIR)/config.mk
+# Targets which don't build the source code
+NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+
+# Only do the generic board check when actually building, not configuring
+ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
+ifeq ($(findstring _config,$(MAKECMDGOALS)),)
+$(CHECK_GENERIC_BOARD)
+endif
+endif
+
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
# U-Boot objects....order is important (i.e. start must be first)
OBJS = $(CPUDIR)/start.o
-ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
-endif
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
endif
fs/fdos/libfdos.o \
fs/jffs2/libjffs2.o \
fs/reiserfs/libreiserfs.o \
+ fs/sandbox/libsandboxfs.o \
fs/ubifs/libubifs.o \
fs/yaffs2/libyaffs2.o \
fs/zfs/libzfs.o
LIBS-y += drivers/bios_emulator/libatibiosemu.o
LIBS-y += drivers/block/libblock.o
LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
LIBS-y += drivers/dma/libdma.o
LIBS-y += drivers/fpga/libfpga.o
LIBS-y += drivers/gpio/libgpio.o
endif
LIBS-y += drivers/rtc/librtc.o
LIBS-y += drivers/serial/libserial.o
-LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
+LIBS-y += drivers/sound/libsound.o
+LIBS-y += drivers/tpm/libtpm.o
LIBS-y += drivers/twserial/libtws.o
LIBS-y += drivers/usb/eth/libusb_eth.o
LIBS-y += drivers/usb/gadget/libusb_gadget.o
LIBS-y += drivers/usb/host/libusb_host.o
LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
LIBS-y += drivers/usb/phy/libusb_phy.o
LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
LIBS-y += drivers/video/libvideo.o
LIBS-y += post/libpost.o
LIBS-y += test/libtest.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
ifeq ($(SOC),exynos)
LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
endif
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
BOARD_SIZE_CHECK = \
@actual=`wc -c $@ | awk '{print $$1}'`; \
- limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+ limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
if test $$actual -gt $$limit; then \
- echo "$@ exceeds file size limit:"; \
- echo " limit: $$limit bytes"; \
- echo " actual: $$actual bytes"; \
- echo " excess: $$((actual - limit)) bytes"; \
+ echo "$@ exceeds file size limit:" >&2 ; \
+ echo " limit: $$limit bytes" >&2 ; \
+ echo " actual: $$actual bytes" >&2 ; \
+ echo " excess: $$((actual - limit)) bytes" >&2; \
exit 1; \
fi
else
ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+ifneq ($(CONFIG_SPL_TARGET),)
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+endif
# enable combined SPL/u-boot/dtb rules for tegra
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
ifeq ($(CONFIG_OF_SEPARATE),y)
ALL-y += $(obj)u-boot-dtb-tegra.bin
else
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
- -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+ -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+ -e $(CONFIG_SYS_UBOOT_START) \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
-$(obj)u-boot.imx: $(obj)u-boot.bin
- $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(obj)u-boot.imx: $(obj)u-boot.bin depend
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
+
+
$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+ -I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
+$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+ $(OBJTREE)/u-boot-with-spl.imx
+
+$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+ $(OBJTREE)/u-boot-with-nand-spl.imx
+
$(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin
$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
$(obj)u-boot.ais
# Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+ elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
-o $(obj)u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
conv=notrunc 2>/dev/null
cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
ifeq ($(CONFIG_OF_SEPARATE),y)
nodtb=dtb
dtbfile=$(obj)u-boot.dtb
rm $(obj)spl/u-boot-spl-pad.bin
endif
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
+# PPC4xx needs the SPL at the end of the image, since the reset vector
+# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
+# and need to introduce a new build target with the full blown U-Boot
+# at the start padded up to the start of the SPL image. And then concat
+# the SPL image to the end.
+$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
+ of=$(obj)u-boot-pad.img 2>/dev/null
+ dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
+ conv=notrunc 2>/dev/null
+ cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT = \
- UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
- sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
- $$UNDEF_LST $(__OBJS) \
+ $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
-# The following line expands into whole rule which generates u-boot.lst,
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
-$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+$(obj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
echo '*** Your board is configured for THUMB mode.'; \
false; \
fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+ @if test $(call cc-version) -lt 0400; then \
+ echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+ false; \
+ fi
+
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-#########################################################################
-## ARM1176 Systems
-#########################################################################
-smdk6400_noUSB_config \
-smdk6400_config : unconfig
- @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
- @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
- @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
- @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
- echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- else \
- echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- fi
- @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
- @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
#########################################################################
#########################################################################
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
- $(obj)include/u-boot.lst \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@$(MAKE) -s -C doc/DocBook/ cleandocs
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
- -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
+ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \
+ -o -name '*.cfgtmp' \) -print \
| xargs rm -f
# Removes everything not needed for testing u-boot
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.pbl
@rm -f $(obj)u-boot.imx
+ @rm -f $(obj)u-boot-with-spl.imx
+ @rm -f $(obj)u-boot-with-nand-spl.imx
@rm -f $(obj)u-boot.ubl
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
- @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
- @rm -f $(obj)MLO
+ @rm -f $(obj)spl/u-boot-spl.lds
+ @rm -f $(obj)MLO MLO.byteswap
+ @rm -f $(obj)SPL
@rm -f $(obj)tools/xway-swap-bytes
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c