#
VERSION = 2014
-PATCHLEVEL = 04
+PATCHLEVEL = 10
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME =
# *DOCUMENTATION*
KBUILD_OUTPUT := $(O)
endif
-ifeq ("$(origin W)", "command line")
- export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
-endif
-
# That's our default target when none is given on the command line
PHONY := _all
_all:
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
-KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+ && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
- $(error output directory "$(saved-output)" does not exist))
+ $(error failed to create output directory "$(saved-output)"))
PHONY += $(MAKECMDGOALS) sub-make
export srctree objtree VPATH
-OBJTREE := $(objtree)
-SPLTREE := $(OBJTREE)/spl
-TPLTREE := $(OBJTREE)/tpl
-SRCTREE := $(srctree)
-TOPDIR := $(SRCTREE)
-export TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE
-
-MKCONFIG := $(SRCTREE)/mkconfig
-export MKCONFIG
-
# Make sure CDPATH settings don't interfere
unexport CDPATH
export HOSTARCH HOSTOS
-# Deal with colliding definitions from tcsh etc.
-VENDOR=
-
#########################################################################
# set default to nothing for native builds
CROSS_COMPILE ?=
endif
+KCONFIG_CONFIG ?= .config
+export KCONFIG_CONFIG
+
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
HOSTCC = gcc
+HOSTCXX = g++
HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
ifeq ($(HOSTOS),cygwin)
HOSTCFLAGS += -ansi
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
-# If we have only "make modules", don't compile built-in objects.
-# When we're building modules with modversions, we need to consider
-# the built-in objects during the descend as well, in order to
-# make sure the checksums are up to date before we record them.
+# If we have only "make modules", don't compile built-in objects.
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
endif
-# If we have "make <whatever> modules", compile modules
-# in addition to whatever we do anyway.
-# Just "make" or "make all" shall build modules as well
+# If we have "make <whatever> modules", compile modules
+# in addition to whatever we do anyway.
+# Just "make" or "make all" shall build modules as well
# U-Boot does not need modules
#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# If the user is running make -s (silent mode), suppress echoing of
# commands
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
+endif
+else # make-3.8x
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
quiet=silent_
endif
+endif
export quiet Q KBUILD_VERBOSE
-
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
-RANLIB = $(CROSS_COMPILE)RANLIB
+PERL = perl
+PYTHON = python
DTC = dtc
CHECK = sparse
UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
-export ARCH CPU BOARD VENDOR SOC
+export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
-export MAKE AWK
-export DTC CHECK CHECKFLAGS
+export MAKE AWK PERL PYTHON
+export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
-export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
export KBUILD_CFLAGS KBUILD_AFLAGS
# When compiling out-of-tree modules, put MODVERDIR in the module
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
- -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
+ -name CVS -o -name .pc -o -name .hg -o -name .git \) \
+ -prune -o
export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
--exclude CVS --exclude .pc --exclude .hg --exclude .git
no-dot-config-targets := clean clobber mrproper distclean \
help %docs check% coccicheck \
- ubootversion backup
+ ubootversion backup tools-only
config-targets := 0
mixed-targets := 0
# We're called with mixed targets (*config and build targets).
# Handle them one by one.
-PHONY += $(MAKECMDGOALS) build-one-by-one
+PHONY += $(MAKECMDGOALS) __build_one_by_one
-$(MAKECMDGOALS): build-one-by-one
+$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
@:
-build-one-by-one:
+__build_one_by_one:
$(Q)set -e; \
for i in $(MAKECMDGOALS); do \
$(MAKE) -f $(srctree)/Makefile $$i; \
# *config targets only - make sure prerequisites are updated, and descend
# in scripts/kconfig to make the *config target
-# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
-# KBUILD_DEFCONFIG may point out an alternative default configuration
-# used for 'make defconfig'
+KBUILD_DEFCONFIG := sandbox_defconfig
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+ (Q)$(MAKE) $(build)=scripts/kconfig $@
-%_config:: outputmakefile
- @$(MKCONFIG) -A $(@:_config=)
+%config: scripts_basic outputmakefile FORCE
+ +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@
else
# ===========================================================================
# Build targets only - this includes vmlinux, arch specific targets, clean
# targets and others. In general all targets except *config targets.
-# load ARCH, BOARD, and CPU configuration
--include include/config.mk
-
ifeq ($(dot-config),1)
# Read in config
+-include include/config/auto.conf
+
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+ $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+
-include include/autoconf.mk
-include include/autoconf.mk.dep
-# load other configuration
+# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
+# is up-to-date. When we switch to a different board configuration, old CONFIG
+# macros are still remaining in include/config/auto.conf. Without the following
+# gimmick, wrong config.mk would be included leading nasty warnings/errors.
+autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \
+ -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG)))
+ifneq ($(autoconf_is_current),)
include $(srctree)/config.mk
-
-ifeq ($(wildcard include/config.mk),)
-$(error "System not configured - see README")
endif
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
-LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))
-
ifndef LDSCRIPT
- #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
+ #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
ifdef CONFIG_SYS_LDSCRIPT
# need to strip off double quotes
LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
# If there is no specified link script, we look in a number of places for it
ifndef LDSCRIPT
- ifeq ($(CONFIG_NAND_U_BOOT),y)
- LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
- ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
- endif
- endif
ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
+ LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
+ LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
- # We don't expect a Makefile here
- LDSCRIPT_MAKEFILE_DIR =
+ LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
endif
endif
else
-
-
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
endif # $(dot-config)
-KBUILD_CFLAGS += -Os #-fomit-frame-pointer
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS += -Os
+else
+KBUILD_CFLAGS += -O2
+endif
ifdef BUILD_TAG
KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
endif
endif
+# Prohibit date/time macros, which would make the build non-deterministic
+KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
+
ifneq ($(CONFIG_SYS_TEXT_BASE),)
KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
endif
export CONFIG_SYS_TEXT_BASE
+include $(srctree)/scripts/Makefile.extrawarn
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+KBUILD_CPPFLAGS += $(KCPPFLAGS)
+KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CFLAGS += $(KCFLAGS)
+
# Use UBOOTINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
-UBOOTINCLUDE :=
-ifneq ($(OBJTREE),$(SRCTREE))
-UBOOTINCLUDE += -I$(OBJTREE)/include
-endif
-UBOOTINCLUDE += -I$(srctree)/include \
- -I$(srctree)/arch/$(ARCH)/include
+UBOOTINCLUDE := \
+ -Iinclude \
+ $(if $(KBUILD_SRC), -I$(srctree)/include) \
+ -I$(srctree)/arch/$(ARCH)/include \
+ -include $(srctree)/include/linux/kconfig.h
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# FIX ME
-cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS)
+cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
+ $(NOSTDINC_FLAGS)
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
#########################################################################
libs-y += net/
libs-y += disk/
libs-y += drivers/
+libs-$(CONFIG_DM) += drivers/core/
libs-y += drivers/dma/
libs-y += drivers/gpio/
libs-y += drivers/i2c/
libs-$(CONFIG_API) += api/
libs-$(CONFIG_HAS_POST) += post/
libs-y += test/
+libs-y += test/dm/
+libs-$(CONFIG_DM_DEMO) += drivers/demo/
ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
libs-y += arch/$(ARCH)/imx-common/
libs-$(CONFIG_ARM) += arch/arm/cpu/
libs-$(CONFIG_PPC) += arch/powerpc/cpu/
-libs-y += board/$(BOARDDIR)/
+libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-y := $(sort $(libs-y))
# Add GCC lib
-ifdef USE_PRIVATE_LIBGCC
-ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
-PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/lib.a
+ifdef CONFIG_USE_PRIVATE_LIBGCC
+ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
+PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
else
-PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
+PLATFORM_LIBGCC = -L $(CONFIG_USE_PRIVATE_LIBGCC) -lgcc
endif
else
PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
endif
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
export PLATFORM_LIBS
+export PLATFORM_LIBGCC
# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
- -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
+ -include $(srctree)/include/u-boot/u-boot.lds.h \
-DCPUDIR=$(CPUDIR) \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
endif
# Always append ALL so that arch config.mk's can add custom ones
-ALL-y += u-boot.srec u-boot.bin System.map
+ALL-y += u-boot.srec u-boot.bin System.map binary_size_check
-ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
+ifeq ($(CONFIG_SPL_FSL_PBL),y)
+ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
+else
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
+endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
+ifeq ($(CONFIG_SPL_FRAMEWORK),y)
+ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
+endif
+ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
ifneq ($(CONFIG_SPL_TARGET),)
ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
endif
quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
-quiet_cmd_mkimage = UIMAGE $@
+quiet_cmd_mkimage = MKIMAGE $@
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
$(if $(KBUILD_VERBOSE:1=), >/dev/null)
u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
$(call if_changed,cat)
+%.imx: %.bin
+ $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
+
quiet_cmd_copy = COPY $@
cmd_copy = cp $< $@
OBJCOPYFLAGS_u-boot.bin := -O binary
+binary_size_check: u-boot.bin FORCE
+ @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \
+ map_size=$(shell cat u-boot.map | \
+ awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
+ | sed 's/0X//g' \
+ | bc); \
+ if [ "" != "$$map_size" ]; then \
+ if test $$map_size -ne $$file_size; then \
+ echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
+ echo " but u-boot.bin shows $$file_size" >&2 ; \
+ exit 1; \
+ fi \
+ fi
+
u-boot.bin: u-boot FORCE
$(call if_changed,objcopy)
$(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
-MKIMAGEFLAGS_u-boot.kwb = -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
- -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+ -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
-MKIMAGEFLAGS_u-boot.pbl = -n $(CONFIG_SYS_FSL_PBL_RCW) \
- -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage
+MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
$(call if_changed,mkimage)
-u-boot.imx: u-boot.bin
- $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
+MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
+
+u-boot-dtb.img: u-boot-dtb.bin FORCE
+ $(call if_changed,mkimage)
u-boot.sha1: u-boot.bin
tools/ubsha1 u-boot.bin
spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
-OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE)
+OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
$(call if_changed,pad_cat)
+u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
u-boot.sb: u-boot.bin spl/u-boot-spl.bin
- $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs $(objtree)/u-boot.sb
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
$(call if_changed,pad_cat)
+MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
+spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ --gap-fill=0
+u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
+ $(call if_changed,pad_cat)
+
+MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot
+u-boot-nand.gph: u-boot.bin FORCE
+ $(call if_changed,mkimage)
+ @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
+
+ifneq ($(CONFIG_SUNXI),)
+OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
+ $(call if_changed,pad_cat)
+endif
+
ifneq ($(CONFIG_TEGRA),)
OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
$(call if_changed,cat)
+#Add a target to create boot binary having SPL binary in PBI format
+#concatenated with u-boot binary. It is need by PowerPC SoC having
+#internal SRAM <= 512KB.
+MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+
+spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ --gap-fill=0xff
+
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
+ $(call if_changed,pad_cat)
+
# PPC4xx needs the SPL at the end of the image, since the reset vector
# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
# and need to introduce a new build target with the full blown U-Boot
--start-group $(u-boot-main) --end-group \
$(PLATFORM_LIBS) -Map u-boot.map
-u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
- $(call if_changed,u-boot__)
-ifeq ($(CONFIG_KALLSYMS),y)
+quiet_cmd_smap = GEN common/system_map.o
+cmd_smap = \
smap=`$(call SYSTEM_MAP,u-boot) | \
awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
$(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
-c $(srctree)/common/system_map.c -o common/system_map.o
+
+u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
+ $(call if_changed,u-boot__)
+ifeq ($(CONFIG_KALLSYMS),y)
+ $(call cmd,smap)
$(call cmd,u-boot__) common/system_map.o
endif
-# The actual objects are generated when descending,
+# The actual objects are generated when descending,
# make sure no implicit rule kicks in
$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
endef
# Store (new) UBOOTRELEASE string in include/config/uboot.release
-include/config/uboot.release: Makefile FORCE
+include/config/uboot.release: include/config/auto.conf FORCE
$(call filechk,uboot.release)
# 1) Check that make has not been executed in the kernel src $(srctree)
prepare3: include/config/uboot.release
ifneq ($(KBUILD_SRC),)
- @$(kecho) ' Using $(srctree) as source for u-boot'
- $(Q)if [ -f $(srctree)/include/config.mk ]; then \
+ @$(kecho) ' Using $(srctree) as source for U-Boot'
+ $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
echo >&2 " in the '$(srctree)' directory.";\
/bin/false; \
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
-prepare1: prepare2 $(version_h) $(timestamp_h)
+prepare1: prepare2 $(version_h) $(timestamp_h) \
+ include/config/auto.conf
ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
@echo >&2 " Your architecture does not support generic board."
LC_ALL=C date +'#define U_BOOT_TIME "%T"')
endef
-$(version_h): $(srctree)/Makefile FORCE
+$(version_h): include/config/uboot.release FORCE
$(call filechk,version.h)
$(timestamp_h): $(srctree)/Makefile FORCE
$(call filechk,timestamp.h)
-#
-# Auto-generate the autoconf.mk file (which is included by all makefiles)
-#
-# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
-# the dep file is only include in this top level makefile to determine when
-# to regenerate the autoconf.mk file.
-
-quiet_cmd_autoconf_dep = GEN $@
- cmd_autoconf_dep = $(CC) -x c -DDO_DEPS_ONLY -M $(c_flags) \
- -MQ include/autoconf.mk $(srctree)/include/common.h > $@ || rm $@
-
-include/autoconf.mk.dep: include/config.h include/common.h
- $(call cmd,autoconf_dep)
-
-quiet_cmd_autoconf = GEN $@
- cmd_autoconf = \
- $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && \
- sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp > $@; \
- rm $@.tmp
-
-include/autoconf.mk: include/config.h
- $(call cmd,autoconf)
-
# ---------------------------------------------------------------------------
PHONY += depend dep
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds = LDS $@
-cmd_cpp_lds = $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ \
- -x assembler-with-cpp -P -o $@ $<
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
+ -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
u-boot.lds: $(LDSCRIPT) prepare FORCE
- $(call if_changed,cpp_lds)
-
-PHONY += nand_spl
-nand_spl: prepare
- $(Q)$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
-
-nand_spl/u-boot-spl-16k.bin: nand_spl
- @:
-
-u-boot-nand.bin: nand_spl/u-boot-spl-16k.bin u-boot.bin FORCE
- $(call if_changed,cat)
+ $(call if_changed_dep,cpp_lds)
spl/u-boot-spl.bin: spl/u-boot-spl
@:
spl/u-boot-spl: tools prepare
- $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
+ $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
+
+spl/sunxi-spl.bin: spl/u-boot-spl
+ @:
tpl/u-boot-tpl.bin: tools prepare
- $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
-TAG_SUBDIRS := $(u-boot-dirs) include
+TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
FIND := find
FINDFLAGS := -L
-name '*.[chS]' -print`
etags:
- etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
+ etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
cscope:
$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
System.map: u-boot
@$(call SYSTEM_MAP,$<) > $@
-checkthumb:
- @if test $(call cc-version) -lt 0404; then \
- echo -n '*** Your GCC does not produce working '; \
- echo 'binaries in THUMB mode.'; \
- echo '*** Your board is configured for THUMB mode.'; \
- false; \
- fi
-
-# GCC 3.x is reported to have problems generating the type of relocation
-# that U-Boot wants.
-# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
-checkgcc4:
- @if test $(call cc-version) -lt 0400; then \
- echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
- false; \
- fi
-
checkdtc:
@if test $(call dtc-version) -lt 0104; then \
echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
env: scripts_basic
$(Q)$(MAKE) $(build)=tools/$@
-tools-all: HOST_TOOLS_ALL=y
+tools-only: scripts_basic $(version_h) $(timestamp_h)
+ $(Q)$(MAKE) $(build)=tools
+
+tools-all: export HOST_TOOLS_ALL=y
tools-all: env tools ;
+cross_tools: export CROSS_BUILD_TOOLS=y
+cross_tools: tools ;
+
.PHONY : CHANGELOG
CHANGELOG:
git log --no-merges U-Boot-1_1_5.. | \
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR)
-CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \
- board/*/config.tmp board/*/*/config.tmp \
- include/autoconf.mk* include/spl-autoconf.mk \
- include/tpl-autoconf.mk
+CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h
# Directories & files removed with 'make clobber'
-CLOBBER_DIRS += $(patsubst %,spl/%, $(filter-out Makefile, \
- $(shell ls -1 spl 2>/dev/null))) \
- tpl
-CLOBBER_FILES += u-boot* MLO* SPL System.map nand_spl/u-boot*
+CLOBBER_DIRS += $(foreach d, spl tpl, $(patsubst %,$d/%, \
+ $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
+CLOBBER_FILES += u-boot* MLO* SPL System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include/generated
-MRPROPER_FILES += .config .config.old \
- tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
- include/config.h include/config.mk
+MRPROPER_DIRS += include/config include/generated spl tpl \
+ .tmp_objdiff
+MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
+ ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
# clean - Delete most, but leave enough to build external modules
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
-clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $f/Makefile),$f))
+clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name '*.gcno' \) -type f -print | xargs rm -f
- @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
- -path './nand_spl/*' -type l -print | xargs rm -f
# clobber
#
mrproper: clobber $(mrproper-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
- @rm -f arch/*/include/asm/arch arch/*/include/asm/proc
+ @rm -f arch/*/include/asm/arch
# distclean
#
@find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' \
- -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+ -o -name '.*.rej' -o -name '*%' -o -name 'core' \
+ -o -name '*.pyc' \) \
-type f -print | xargs rm -f
+ @rm -f boards.cfg
backup:
- F=`basename $(TOPDIR)` ; cd .. ; \
+ F=`basename $(srctree)` ; cd .. ; \
gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
help:
@echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
-# uncomment after adding Kconfig feature
-# @echo 'Configuration targets:'
-# @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
-# @echo ''
+ @echo 'Configuration targets:'
+ @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+ @echo ''
@echo 'Other generic targets:'
@echo ' all - Build all necessary images depending on configuration'
@echo ' u-boot - Build the bare u-boot'
@echo ' dir/file.[oisS] - Build specified target only'
@echo ' dir/file.lst - Build specified mixed source/assembly target only'
@echo ' (requires a recent binutils and recent build (System.map))'
- @echo ' tags/TAGS - Generate tags file for editors'
+ @echo ' tags/ctags - Generate ctags file for editors'
+ @echo ' etags - Generate etags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' ubootrelease - Output the release version string'
@echo ' ubootversion - Output the version stored in Makefile'
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-# FIXME Should go into a make.lib or something
+# FIXME Should go into a make.lib or something
# ===========================================================================
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))