-This file should include highlights of the changes made in the
-OpenOCD openocd-0.3.0 source archive release. See the repository
-history for details about what changed, including bugfixes and
-other issues not mentioned here.
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
JTAG Layer:
- FT2232H (high speed USB) support doesn't need separate configuration
- New reset_config options for SRST gating the JTAG clock (or not)
- TAP declaration no longer requires ircapture and mask attributes
- New "post-reset" event handler for TAP-invariant setup code
+ * New CMSIS-DAP driver
+ * Andes AICE debug adapter support
+ * New OpenJTAG driver
+ * New BCM2835 (RaspberryPi) driver
+ * JTAG VPI client driver (for OpenRISC Reference Platform SoC)
+ * Xilinx BSCAN_* for OpenRISC support
+ * ST-LINKv2-1 support
+ * ST-LINKv2 SWO tracing support (UART emulation)
+ * JLink-OB (onboard) support
+ * Altera USB Blaster driver rewrite, initial Blaster II
+ support
+ * ULINK driver ported to libusb-1.0, OpenULINK build fixes
+ * Support up to 64 bit IR lengths
+ * SVF playback (FPGA programming) fixes
+ * "ftdi" interface driver got extensive testing and is now
+ recommended over the old ft2232 implementation
+
+Boundary Scan:
Target Layer:
- New commands for use with Cortex-M3 processors:
- "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
- "cortex_m3 vector_catch" ... traps certain hardware faults
- without tying up breakpoint resources
- If you're willing to help debug it
- VERY EARLY Cortex-A8 and ARMv7A support
- Updated BeagleBoard.org hardware support
- New commands for use with XScale processors: "xscale vector_table"
- ARM11
- single stepping support for i.MX31
- bugfix for missing "arm11" prefix on "arm11 memwrite ..."
- ETM support
- Unavailable registers are not listed
+ * New target: Andes nds32
+ * New target: OpenRISC OR1K
+ * New target: Intel Quark X10xx
+ * MIPS EJTAG 1.5/2.0 support
+ * MIPS speed improvements
+ * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE
+ hosts now
+ * XScale vector_catch support, reset fixes
+ * dsp563xx ad-hoc breakpoint/watchpoint support
+ * RTOS support for embKernel
+ * Target profiling improvements
+ * Memory access functions testbench
Flash Layer:
- The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
- New lpc2900 driver for NXP LPC2900 chips (ARM968 based)
- New "last" flag for NOR "flash erase_sector" and "flash protect"
- The "nand erase N" command now erases all of bank N
+ * STM32 family sync with reference manuals, other bugfixes
+ * STM32F401, STM32F07x support
+ * Atmel SAM4L, SAMG5x support
+ * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s,
+ at91sam3n0{a,b,0a,0b} support, bugfixes
+ * Atmel SAMD support
+ * Milandr 1986ВЕ* support
+ * Kinetis KL, K21 support
+ * Nuvoton NuMicro MINI5{1,2,4} support
+ * Nuvoton NUC910 series support
+ * NXP LPC43xx, LPC2000 fixes
+ * NXP LPC800, LPC810 support
+ * More ATmega parts supported
+ * Fujitsu MB9Ax family support
+ * EFM32 Wonder Gecko family support
+ * Nordic nRF51 support
Board, Target, and Interface Configuration Scripts:
- Amontec JTAGkey2 support
- Cleanup and additions for the TI/Luminary Stellaris scripts
- LPC1768 target (and flash) support
- Keil MCB1700 eval board
- Samsung s3c2450
- Mini2440 board
- Numeric TAP and Target identifiers now trigger warnings
+ * STM32W108xx generic target config
+ * STM32F429 discovery board config
+ * STM32 Nucleo boards configs
+ * DENX M53EVK board config
+ * Altera Cyclone V SoC, SoCkit config
+ * New TI Launchpads board configs
+ * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board
+ configs
+ * Marvell Armada 370 family initial support
+ * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts
+ * Freescale FRDM-KL25Z, KL46Z board configs
+ * Digilent Zedboard config
+ * Asus RT-N16, Linksys WRT54GL board configs
+ * Atmel Xplained initial support
+ * Broadcom bcm28155_ap board config
+ * TUMPA, TUMPA Lite interface configs
+ * Digilent JTAG-SMT2 interface config
+ * New RAM testing functions
+ * Easy-to-use firmware recovery helpers targetting ordinary
+ users with common equipment
+
+Server Layer:
+ * Auto-generation of GDB target description for ARMv7-M,
+ ARM4, nds23, OR1K, Quark
+ * GDB File-I/O Remote Protocol extension support
+ * Default GDB flashing events handlers to initialise and reset
+ the target automatically when "load" is used
Documentation:
- Capture more debugging and setup advice
- Notes on target source code changes that may help debugging
+ * Extensive README* changes
+ * The official User's Guide was proofread
+ * Example cross-build script
+ * RTOS documentation improvements
+ * Tcl RPC documentation added
Build and Release:
+ * *BSD, OS X, clang, ARM, windows build fixes
+ * New pkg-config support changes the way libusb (and other
+ dependencies) are handled. Many adapter drivers are now
+ selected automatically during the configure stage.
+
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path=
+
-For more details about what has changed since the last release,
-see the ChangeLog associated with this source archive. For older NEWS,
-see the NEWS files associated with each release (i.e. NEWS-<version>).
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
For more information about contributing test reports, bug fixes, or new
features and device support, please read the new Developer Manual (or
-the BUGS and PATCHES files in the source archive).
+the BUGS and PATCHES.txt files in the source archive).
projects / openocd / blobdiff