* Modify bootm command to support booting with flat device trees

[u-boot] / README

diff --git a/README b/README
index a3dadd42a034d160bc2a6ac73d544140f81e18bf..0fda03f3c27c758080516ec1924906e3a2dbf472 100644 (file)
--- a/README
+++ b/README
@@ -310,8 +310,9 @@ The following options need to be configured:
                CONFIG_IMPA7,       CONFIG_INNOVATOROMAP1510,   CONFIG_INNOVATOROMAP1610,
                CONFIG_KB9202,          CONFIG_LART,            CONFIG_LPD7A400,
                CONFIG_LUBBOCK,         CONFIG_OSK_OMAP5912,    CONFIG_OMAP2420H4,
-               CONFIG_SHANNON,         CONFIG_P2_OMAP730,      CONFIG_SMDK2400,
-               CONFIG_SMDK2410,        CONFIG_TRAB,            CONFIG_VCMA9
+               CONFIG_PLEB2,           CONFIG_SHANNON,         CONFIG_P2_OMAP730,
+               CONFIG_SMDK2400,        CONFIG_SMDK2410,        CONFIG_TRAB,
+               CONFIG_VCMA9
 
                MicroBlaze based boards:
                ------------------------
@@ -446,6 +447,11 @@ The following options need to be configured:
                Board code has addition modification that it wants to make
                to the flat device tree before handing it off to the kernel
 
+               CONFIG_OF_BOOT_CPU
+
+               This define fills in the correct boot cpu in the boot
+               param header, the default value is zero if undefined.
+
 - Serial Ports:
                CFG_PL010_SERIAL
 
@@ -3012,6 +3018,55 @@ format!) to the "bootm" command:
 
        bash#
 
+Boot Linux and pass a flat device tree:
+-----------
+
+First, U-Boot must be compiled with the appropriate defines. See the section
+titled "Linux Kernel Interface" above for a more in depth explanation. The
+following is an example of how to start a kernel and pass an updated
+flat device tree:
+
+=> print oftaddr
+oftaddr=0x300000
+=> print oft
+oft=oftrees/mpc8540ads.dtb
+=> tftp $oftaddr $oft
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.101
+Filename 'oftrees/mpc8540ads.dtb'.
+Load address: 0x300000
+Loading: #
+done
+Bytes transferred = 4106 (100a hex)
+=> tftp $loadaddr $bootfile
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.2
+Filename 'uImage'.
+Load address: 0x200000
+Loading:############
+done
+Bytes transferred = 1029407 (fb51f hex)
+=> print loadaddr
+loadaddr=200000
+=> print oftaddr
+oftaddr=0x300000
+=> bootm $loadaddr - $oftaddr
+## Booting image at 00200000 ...
+   Image Name:   Linux-2.6.17-dirty
+   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
+   Data Size:    1029343 Bytes = 1005.2 kB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+Booting using flat device tree at 0x300000
+Using MPC85xx ADS machine description
+Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
+[snip]
+
+
 More About U-Boot Image Types:
 ------------------------------