x86: Support Intel FSP initialization path in start.S

[u-boot] / README

diff --git a/README b/README
index df3781a0fce372fa6eb489a38448d016e4b478b7..4ca04d0489ed3dcd3f04f403cc527f633746f1c2 100644 (file)
--- a/README
+++ b/README
@@ -409,6 +409,10 @@ The following options need to be configured:
                Enables a workaround for IFC erratum A003399. It is only
                requred during NOR boot.
 
+               CONFIG_A008044_WORKAROUND
+               Enables a workaround for T1040/T1042 erratum A008044. It is only
+               requred during NAND boot and valid for Rev 1.0 SoC revision
+
                CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
                This is the value to write into CCSR offset 0x18600
@@ -783,6 +787,13 @@ The following options need to be configured:
                Board code has addition modification that it wants to make
                to the flat device tree before handing it off to the kernel
 
+               CONFIG_OF_SYSTEM_SETUP
+
+               Other code has addition modification that it wants to make
+               to the flat device tree before handing it off to the kernel.
+               This causes ft_system_setup() to be called before booting
+               the kernel.
+
                CONFIG_OF_BOOT_CPU
 
                This define fills in the correct boot CPU in the boot
@@ -1103,6 +1114,7 @@ The following options need to be configured:
                CONFIG_CMD_EXT4         * ext4 command support
                CONFIG_CMD_FS_GENERIC   * filesystem commands (e.g. load, ls)
                                          that work for multiple fs types
+               CONFIG_CMD_FS_UUID      * Look up a filesystem UUID
                CONFIG_CMD_SAVEENV        saveenv
                CONFIG_CMD_FDC          * Floppy Disk Support
                CONFIG_CMD_FAT          * FAT command support
@@ -2948,18 +2960,6 @@ CBFS (Coreboot Filesystem) support
 
                Enable auto completion of commands using TAB.
 
-               CONFIG_SYS_HUSH_PARSER
-
-               Define this variable to enable the "hush" shell (from
-               Busybox) as command line interpreter, thus enabling
-               powerful command line syntax like
-               if...then...else...fi conditionals or `&&' and '||'
-               constructs ("shell scripts").
-
-               If undefined, you get the old, much simpler behaviour
-               with a somewhat smaller memory footprint.
-
-
                CONFIG_SYS_PROMPT_HUSH_PS2
 
                This defines the secondary prompt string, which is
@@ -3521,7 +3521,7 @@ FIT uImage format:
                to 128 or 256, although it does not have to be power of 2).
 
                default: 4096
-               
+
                CONFIG_MTD_UBI_BEB_LIMIT
                This option specifies the maximum bad physical eraseblocks UBI
                expects on the MTD device (per 1024 eraseblocks). If the
@@ -3661,10 +3661,13 @@ FIT uImage format:
 
                CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
                CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
-               CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
-               Address, size and partition on the MMC to load U-Boot from
+               Address and partition on the MMC to load U-Boot from
                when the MMC is being used in raw mode.
 
+               CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+               Partition on the MMC to load U-Boot from when the MMC is being
+               used in raw mode
+
                CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
                Sector to load kernel uImage from when MMC is being
                used in raw mode (for Falcon mode)
@@ -3675,6 +3678,10 @@ FIT uImage format:
                parameters from when MMC is being used in raw mode
                (for falcon mode)
 
+               CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
+               Partition on the MMC to load U-Boot from when the MMC is being
+               used in fs mode
+
                CONFIG_SPL_FAT_SUPPORT
                Support for fs/fat/libfat.o in SPL binary