- s3c24x0 Files specific to Samsung S3C24X0 CPUs
- arm925t Files specific to ARM 925 CPUs
- arm926ejs Files specific to ARM 926 CPUs
+ - arm1136 Files specific to ARM 1136 CPUs
- at91rm9200 Files specific to Atmel AT91RM9200 CPUs
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
ARM based boards:
-----------------
- CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110,
- CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
- CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
- CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK,
- CONFIG_OSK_OMAP5912, CONFIG_SHANNON, CONFIG_P2_OMAP730,
- CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB,
- CONFIG_VCMA9
+ CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110,
+ CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
+ CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+ CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK,
+ CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON,
+ CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
+ CONFIG_TRAB, CONFIG_VCMA9
MicroBlaze based boards:
------------------------
function struct part_info* jffs2_part_info(int part_num)
If you define only one JFFS2 partition you may also want to
- #define CFG_JFFS_SINGLE_PART 1
+ #define CFG_JFFS_SINGLE_PART 1
to disable the command chpart. This is the default when you
have not defined a custom partition
initializations.
- CFG_IMMR: Physical address of the Internal Memory.
- DO NOT CHANGE unless you know exactly what you're
+ DO NOT CHANGE unless you know exactly what you're
doing! (11-4) [MPC8xx/82xx systems only]
- CFG_INIT_RAM_ADDR:
Add the "loopw" memory command. This only takes effect if
the memory commands are activated globally (CFG_CMD_MEM).
+- CONFIG_MX_CYCLIC
+ Add the "mdc" and "mwc" memory commands. These are cyclic
+ "md/mw" commands.
+ Examples:
+
+ => mdc.b 10 4 500
+ This command will print 4 bytes (10,11,12,13) each 500 ms.
+
+ => mwc.l 100 12345678 10
+ This command will write 12345678 to address 100 all 10 ms.
+
+ This only takes effect if the memory commands are activated
+ globally (CFG_CMD_MEM).
+
Building the Software:
======================
FADS850SAR_config omap1610h2_config TQM850L_config
FADS860T_config omap1610inn_config TQM855L_config
FPS850L_config omap5912osk_config TQM860L_config
- WALNUT405_config
+ omap2420h4_config WALNUT405_config
Yukon8220_config
ZPC1900_config