README: remove spurious line

[u-boot] / README

diff --git a/README b/README
index b74483e9fb050e44d9a78a398f409c13078d0f2d..68dab2d1e3c4f1484f3d0dd4a81008b650b803a6 100644 (file)
--- a/README
+++ b/README
@@ -356,6 +356,13 @@ The following options need to be configured:
                Define this option if you want to enable the
                ICache only when Code runs from RAM.
 
+- 85xx CPU Options:
+               CONFIG_SYS_FSL_TBCLK_DIV
+
+               Defines the core time base clock divider ratio compared to the
+               system clock.  On most PQ3 devices this is 8, on newer QorIQ
+               devices it can be 16 or 32.  The ratio varies from SoC to Soc.
+
 - Intel Monahans options:
                CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
 
@@ -468,6 +475,18 @@ The following options need to be configured:
                define this to a list of base addresses for each (supported)
                port. See e.g. include/configs/versatile.h
 
+               CONFIG_PL011_SERIAL_RLCR
+
+               Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500)
+               have separate receive and transmit line control registers.  Set
+               this variable to initialize the extra register.
+
+               CONFIG_PL011_SERIAL_FLUSH_ON_INIT
+
+               On some platforms (e.g. U8500) U-Boot is loaded by a second stage
+               boot loader that has already initialized the UART.  Define this
+               variable to flush the UART at init time.
+
 
 - Console Interface:
                Depending on board, define exactly one serial port
@@ -1303,7 +1322,6 @@ The following options need to be configured:
                driver in use must provide a function: mcast() to join/leave a
                multicast group.
 
-               CONFIG_BOOTP_RANDOM_DELAY
 - BOOTP Recovery Mode:
                CONFIG_BOOTP_RANDOM_DELAY