efi_selftest: do not execute test if setup failed

[u-boot] / README

diff --git a/README b/README
index ed79298fd4ea9f09911ac5bbc7860da870d9055a..6f98e09e680d539246c279a18059c2f38ad7ce10 100644 (file)
--- a/README
+++ b/README
@@ -812,14 +812,6 @@ The following options need to be configured:
                CONFIG_AT91_HW_WDT_TIMEOUT
                specify the timeout in seconds. default 2 seconds.
 
-- U-Boot Version:
-               CONFIG_VERSION_VARIABLE
-               If this variable is defined, an environment variable
-               named "ver" is created by U-Boot showing the U-Boot
-               version as printed by the "version" command.
-               Any change to this variable will be reverted at the
-               next reset.
-
 - Real-Time Clock:
 
                When CONFIG_CMD_DATE is selected, the type of the RTC
@@ -2213,12 +2205,6 @@ The following options need to be configured:
                the environment like the "source" command or the
                boot command first.
 
-               CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-               Define this in order to add variables describing certain
-               run-time determined information about the hardware to the
-               environment.  These will be named board_name, board_rev.
-
                CONFIG_DELAY_ENVIRONMENT
 
                Normally the environment is loaded when the board is
@@ -2802,9 +2788,6 @@ Configuration Settings:
                Begin and End addresses of the area used by the
                simple memory test.
 
-- CONFIG_SYS_ALT_MEMTEST:
-               Enable an alternate, more extensive memory test.
-
 - CONFIG_SYS_MEMTEST_SCRATCH:
                Scratch address used by the alternate memory test
                You only need to set this if address zero isn't writeable
@@ -3430,9 +3413,6 @@ Low Level (hardware related) configuration options:
                If defined, the x86 reset vector code is included. This is not
                needed when U-Boot is running from Coreboot.
 
-- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
-               Enables the RTC32K OSC on AM33xx based plattforms
-
 - CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
                Option to disable subpage write in NAND driver
                driver that uses this: