/arc Files generic to ARC architecture
/arm Files generic to ARM architecture
/avr32 Files generic to AVR32 architecture
- /blackfin Files generic to Analog Devices Blackfin architecture
/m68k Files generic to m68k architecture
/microblaze Files generic to microblaze architecture
/mips Files generic to MIPS architecture
/powerpc Files generic to PowerPC architecture
/sandbox Files generic to HW-independent "sandbox"
/sh Files generic to SH architecture
- /sparc Files generic to SPARC architecture
/x86 Files generic to x86 architecture
/api Machine/arch independent API for external apps
/board Board dependent files
Select high exception vectors of the ARM core, e.g., do not
clear the V bit of the c1 register of CP15.
- CONFIG_SYS_THUMB_BUILD
-
- Use this flag to build U-Boot using the Thumb instruction
- set for ARM architectures. Thumb instruction set provides
- better code density. For ARM architectures that support
- Thumb2 this flag will result in Thumb2 code generated by
- GCC.
-
- CONFIG_ARM_ERRATA_716044
- CONFIG_ARM_ERRATA_742230
- CONFIG_ARM_ERRATA_743622
- CONFIG_ARM_ERRATA_751472
- CONFIG_ARM_ERRATA_761320
- CONFIG_ARM_ERRATA_773022
- CONFIG_ARM_ERRATA_774769
- CONFIG_ARM_ERRATA_794072
-
- If set, the workarounds for these ARM errata are applied early
- during U-Boot startup. Note that these options force the
- workarounds to be applied; no CPU-type/version detection
- exists, unlike the similar options in the Linux kernel. Do not
- set these options unless they apply!
-
COUNTER_FREQUENCY
Generic timer clock source frequency.
different from COUNTER_FREQUENCY, and can only be determined
at run time.
- NOTE: The following can be machine specific errata. These
- do have ability to provide rudimentary version and machine
- specific checks, but expect no product checks.
- CONFIG_ARM_ERRATA_430973
- CONFIG_ARM_ERRATA_454179
- CONFIG_ARM_ERRATA_621766
- CONFIG_ARM_ERRATA_798870
- CONFIG_ARM_ERRATA_801819
-
- Tegra SoC options:
CONFIG_TEGRA_SUPPORT_NON_SECURE
CONFIG_CMD_AES AES 128 CBC encrypt/decrypt
CONFIG_CMD_ASKENV * ask for env variable
CONFIG_CMD_BDI bdinfo
- CONFIG_CMD_BEDBUG * Include BedBug Debugger
- CONFIG_CMD_BMP * BMP support
- CONFIG_CMD_BSP * Board specific commands
CONFIG_CMD_BOOTD bootd
CONFIG_CMD_BOOTI * ARM64 Linux kernel Image support
CONFIG_CMD_CACHE * icache, dcache
- CONFIG_CMD_CLK * clock command support
CONFIG_CMD_CONSOLE coninfo
CONFIG_CMD_CRC32 * crc32
- CONFIG_CMD_DATE * support for RTC, date/time...
CONFIG_CMD_DHCP * DHCP support
CONFIG_CMD_DIAG * Diagnostics
CONFIG_CMD_DS4510 * ds4510 I2C gpio commands
This will also enable the command "fatwrite" enabling the
user to write files to FAT.
-- CBFS (Coreboot Filesystem) support:
- CONFIG_CMD_CBFS
-
- Define this to enable support for reading from a Coreboot
- filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
- and cbfsload.
-
- FAT(File Allocation Table) filesystem cluster size:
CONFIG_FS_FAT_MAX_CLUSTSIZE
CONFIG_SYS_DIU_ADDR
CONFIG_VIDEO
- CONFIG_CMD_BMP
CONFIG_CFB_CONSOLE
CONFIG_VIDEO_SW_CURSOR
CONFIG_VGA_AS_SINGLE_DEVICE
320x240. Black & white.
- Normally display is black on white background; define
- CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
-
CONFIG_LCD_ALIGNMENT
Normally the LCD is page-aligned (typically 4KB). If this is
can be displayed via the splashscreen support or the
bmp command.
-- Do compressing for memory range:
- CONFIG_CMD_ZIP
-
- If this option is set, it would use zlib deflate method
- to compress the specified memory at its best effort.
-
- Compression support:
CONFIG_GZIP
this is instead controlled by the value of
/config/load-environment.
-- Parallel Flash support:
- CONFIG_SYS_NO_FLASH
-
- Traditionally U-Boot was run on systems with parallel NOR
- flash. This option is used to disable support for parallel NOR
- flash. This option should be defined if the board does not have
- parallel flash.
-
- If this option is not defined one of the generic flash drivers
- (e.g. CONFIG_FLASH_CFI_DRIVER or CONFIG_ST_SMI) must be
- selected or the board must provide an implementation of the
- flash API (see include/flash.h).
-
- DataFlash Support:
CONFIG_HAS_DATAFLASH
This enables 'hdmidet' command which returns true if an
HDMI monitor is detected. This command is i.MX 6 specific.
- CONFIG_CMD_BMODE
- This enables the 'bmode' (bootmode) command for forcing
- a boot from specific media.
-
- This is useful for forcing the ROM's usb downloader to
- activate upon a watchdog reset which is nice when iterating
- on U-Boot. Using the reset button or running bmode normal
- will set it back to normal. This command currently
- supports i.MX53 and i.MX6.
-
- bootcount support:
CONFIG_BOOTCOUNT_LIMIT
CONFIG_AT91SAM9XE
enable special bootcounter support on at91sam9xe based boards.
- CONFIG_BLACKFIN
- enable special bootcounter support on blackfin based boards.
CONFIG_SOC_DA8XX
enable special bootcounter support on da850 based boards.
CONFIG_BOOTCOUNT_RAM
consider that a completely unreadable NAND block is bad,
and thus should be skipped silently.
- CONFIG_SPL_ABORT_ON_RAW_IMAGE
- When defined, SPL will proceed to another boot method
- if the image it has loaded does not have a signature.
-
CONFIG_SPL_RELOC_STACK
Adress of the start of the stack SPL will use after
relocation. If unspecified, this is equal to
average for all boards 752 bytes for the whole U-Boot image,
624 text + 127 data).
-On Blackfin, the normal C ABI (except for P3) is followed as documented here:
- http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface
-
- ==> U-Boot will use P3 to hold a pointer to the global data
-
On ARM, the following registers are used:
R0: function argument word/integer result