include/common.h: remove DIV_ROUND definition

[u-boot] / README

diff --git a/README b/README
index 2808dd1eb9a27cdacadb86f1a2dd9eb26121ec29..837dca0c931852d5592047fe19012ffeb3e3e6a3 100644 (file)
--- a/README
+++ b/README
@@ -3547,7 +3547,7 @@ FIT uImage format:
 
                CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
                CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
-               CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION
+               CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
                Address, size and partition on the MMC to load U-Boot from
                when the MMC is being used in raw mode.
 
@@ -3564,16 +3564,19 @@ FIT uImage format:
                CONFIG_SPL_FAT_SUPPORT
                Support for fs/fat/libfat.o in SPL binary
 
-               CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
-               Filename to read to load U-Boot when reading from FAT
+               CONFIG_SPL_EXT_SUPPORT
+               Support for EXT filesystem in SPL binary
 
-               CONFIG_SPL_FAT_LOAD_KERNEL_NAME
+               CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
+               Filename to read to load U-Boot when reading from filesystem
+
+               CONFIG_SPL_FS_LOAD_KERNEL_NAME
                Filename to read to load kernel uImage when reading
-               from FAT (for Falcon mode)
+               from filesystem (for Falcon mode)
 
-               CONFIG_SPL_FAT_LOAD_ARGS_NAME
+               CONFIG_SPL_FS_LOAD_ARGS_NAME
                Filename to read to load kernel argument parameters
-               when reading from FAT (for Falcon mode)
+               when reading from filesystem (for Falcon mode)
 
                CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
                Set this for NAND SPL on PPC mpc83xx targets, so that
@@ -3602,6 +3605,10 @@ FIT uImage format:
                Support for the MTD subsystem within SPL.  Useful for
                environment on NAND support within SPL.
 
+               CONFIG_SPL_NAND_RAW_ONLY
+               Support to boot only raw u-boot.bin images. Use this only
+               if you need to save space.
+
                CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
                Set for the SPL on PPC mpc8xxx targets, support for
                drivers/ddr/fsl/libddr.o in SPL binary.
@@ -4054,6 +4061,11 @@ Configuration Settings:
        be asserted. See doc/README.omap-reset-time for details on how
        the value can be calulated on a given board.
 
+- CONFIG_USE_STDINT
+       If stdint.h is available with your toolchain you can define this
+       option to enable it. You can provide option 'USE_STDINT=1' when
+       building U-Boot to enable this.
+
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
@@ -5004,14 +5016,14 @@ this behavior and build U-Boot to some external directory:
        make O=/tmp/build NAME_defconfig
        make O=/tmp/build all
 
-2. Set environment variable BUILD_DIR to point to the desired location:
+2. Set environment variable KBUILD_OUTPUT to point to the desired location:
 
-       export BUILD_DIR=/tmp/build
+       export KBUILD_OUTPUT=/tmp/build
        make distclean
        make NAME_defconfig
        make all
 
-Note that the command line "O=" setting overrides the BUILD_DIR environment
+Note that the command line "O=" setting overrides the KBUILD_OUTPUT environment
 variable.