CONFIG_CMD_AES AES 128 CBC encrypt/decrypt
CONFIG_CMD_ASKENV * ask for env variable
CONFIG_CMD_BDI bdinfo
- CONFIG_CMD_BEDBUG * Include BedBug Debugger
- CONFIG_CMD_BMP * BMP support
- CONFIG_CMD_BSP * Board specific commands
CONFIG_CMD_BOOTD bootd
CONFIG_CMD_BOOTI * ARM64 Linux kernel Image support
CONFIG_CMD_CACHE * icache, dcache
- CONFIG_CMD_CLK * clock command support
CONFIG_CMD_CONSOLE coninfo
CONFIG_CMD_CRC32 * crc32
- CONFIG_CMD_DATE * support for RTC, date/time...
CONFIG_CMD_DHCP * DHCP support
CONFIG_CMD_DIAG * Diagnostics
CONFIG_CMD_DS4510 * ds4510 I2C gpio commands
tree is available in the global data as gd->fdt_blob.
U-Boot needs to get its device tree from somewhere. This can
- be done using one of the two options below:
+ be done using one of the three options below:
CONFIG_OF_EMBED
If this variable is defined, U-Boot will embed a device tree
still use the individual files if you need something more
exotic.
+ CONFIG_OF_BOARD
+ If this variable is defined, U-Boot will use the device tree
+ provided by the board at runtime instead of embedding one with
+ the image. Only boards defining board_fdt_blob_setup() support
+ this option (see include/fdtdec.h file).
+
- Watchdog:
CONFIG_WATCHDOG
If this variable is defined, it enables watchdog
This will also enable the command "fatwrite" enabling the
user to write files to FAT.
-- CBFS (Coreboot Filesystem) support:
- CONFIG_CMD_CBFS
-
- Define this to enable support for reading from a Coreboot
- filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
- and cbfsload.
-
- FAT(File Allocation Table) filesystem cluster size:
CONFIG_FS_FAT_MAX_CLUSTSIZE
CONFIG_SYS_DIU_ADDR
CONFIG_VIDEO
- CONFIG_CMD_BMP
CONFIG_CFB_CONSOLE
CONFIG_VIDEO_SW_CURSOR
CONFIG_VGA_AS_SINGLE_DEVICE
320x240. Black & white.
- Normally display is black on white background; define
- CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
-
CONFIG_LCD_ALIGNMENT
Normally the LCD is page-aligned (typically 4KB). If this is
- approved multibus support
- better i2c mux support
- ** Please consider updating your I2C driver now. **
-
- These enable legacy I2C serial bus commands. Defining
- CONFIG_HARD_I2C will include the appropriate I2C driver
- for the selected CPU.
-
- This will allow you to use i2c commands at the u-boot
- command line (as long as you set CONFIG_CMD_I2C in
- CONFIG_COMMANDS) and communicate with i2c based realtime
- clock chips. See common/cmd_i2c.c for a description of the
- command line interface.
+ ** CONFIG_HARD_I2C is now being removed **
- CONFIG_HARD_I2C selects a hardware I2C controller.
-
- There are several other quantities that must also be
- defined when you define CONFIG_HARD_I2C.
+----under removal:
In both cases you will need to define CONFIG_SYS_I2C_SPEED
to be the frequency (in Hz) at which you wish your i2c bus
This enables 'hdmidet' command which returns true if an
HDMI monitor is detected. This command is i.MX 6 specific.
- CONFIG_CMD_BMODE
- This enables the 'bmode' (bootmode) command for forcing
- a boot from specific media.
-
- This is useful for forcing the ROM's usb downloader to
- activate upon a watchdog reset which is nice when iterating
- on U-Boot. Using the reset button or running bmode normal
- will set it back to normal. This command currently
- supports i.MX53 and i.MX6.
-
- bootcount support:
CONFIG_BOOTCOUNT_LIMIT
If defined, the x86 reset vector code is included. This is not
needed when U-Boot is running from Coreboot.
-- CONFIG_SYS_MPUCLK
- Defines the MPU clock speed (in MHz).
-
- NOTE : currently only supported on AM335x platforms.
-
- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
Enables the RTC32K OSC on AM33xx based plattforms