x86: config: Reflect the name changes of LPC TPM configs

[u-boot] / README

diff --git a/README b/README
index 3d81092057bcaf0a77b6f5112d37d35eccea9613..b025dfc24aec94f06b9f235bfe582c4e0897c3af 100644 (file)
--- a/README
+++ b/README
@@ -843,6 +843,7 @@ The following options need to be configured:
                CONFIG_CMD_FDOS         * Dos diskette Support
                CONFIG_CMD_FLASH          flinfo, erase, protect
                CONFIG_CMD_FPGA           FPGA device initialization support
+               CONFIG_CMD_FUSE           Device fuse support
                CONFIG_CMD_GETTIME      * Get time since boot
                CONFIG_CMD_GO           * the 'go' command (exec code)
                CONFIG_CMD_GREPENV      * search environment
@@ -1208,7 +1209,10 @@ The following options need to be configured:
                        If this option is set, the driver enables cache flush.
 
 - TPM Support:
-               CONFIG_GENERIC_LPC_TPM
+               CONFIG_TPM
+               Support TPM devices.
+
+               CONFIG_TPM_TIS_LPC
                Support for generic parallel port TPM devices. Only one device
                per system is supported at this time.
 
@@ -3345,6 +3349,10 @@ Configuration Settings:
        offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
        directly. You should not need to touch this setting.
 
+- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
+       This is set by OMAP boards for the max time that reset should
+       be asserted. See doc/README.omap-reset-time for details on how
+       the value can be calulated on a given board.
 
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
@@ -5063,7 +5071,7 @@ On some platforms, it's possible to boot Linux zImage. This is done
 using the "bootz" command. The syntax of "bootz" command is the same
 as the syntax of "bootm" command.
 
-Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
+Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply
 kernel with raw initrd images. The syntax is slightly different, the
 address of the initrd must be augmented by it's size, in the following
 format: "<initrd addres>:<initrd size>".