powerpc/85xx: Add some defines & registers in immap_85xx.h

[u-boot] / README

diff --git a/README b/README
index e005bc5a04bbee5b9d8977d71d8fe66b5b2834e1..bd035235c129c61b14811a8c8b8c81932a1b2acf 100644 (file)
--- a/README
+++ b/README
@@ -319,6 +319,11 @@ The following options need to be configured:
                        CONFIG_SYS_PQ2FADS      - PQ2FADS-ZU or PQ2FADS-VR
                        CONFIG_SYS_8272ADS      - MPC8272ADS
 
+- Marvell Family Member
+               CONFIG_SYS_MVFS         - define it if you want to enable
+                                         multiple fs option at one time
+                                         for marvell soc family
+
 - MPC824X Family Member (if CONFIG_MPC824X is defined)
                Define exactly one of
                CONFIG_MPC8240, CONFIG_MPC8245
@@ -1069,6 +1074,28 @@ The following options need to be configured:
                and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
                or CONFIG_VIDEO_SED13806_16BPP
 
+               CONFIG_FSL_DIU_FB
+               Enable the Freescale DIU video driver.  Reference boards for
+               SOCs that have a DIU should define this macro to enable DIU
+               support, and should also define these other macros:
+
+                       CONFIG_SYS_DIU_ADDR
+                       CONFIG_VIDEO
+                       CONFIG_CMD_BMP
+                       CONFIG_CFB_CONSOLE
+                       CONFIG_VIDEO_SW_CURSOR
+                       CONFIG_VGA_AS_SINGLE_DEVICE
+                       CONFIG_VIDEO_LOGO
+                       CONFIG_VIDEO_BMP_LOGO
+
+               The DIU driver will look for the 'monitor' environment variable,
+               and if defined, enable the DIU as a console during boot.  This
+               variable should be set to one of these values:
+
+                       '0'     Output video to the DVI connector
+                       '1'     Output video to the LVDS connector
+                       '2'     Output video to the Dual-Link LVDS connector
+
 - Keyboard Support:
                CONFIG_KEYBOARD
 
@@ -1660,6 +1687,11 @@ The following options need to be configured:
                SPI EEPROM, also an instance works with Crystal A/D and
                D/As on the SACSng board)
 
+               CONFIG_SH_SPI
+
+               Enables the driver for SPI controller on SuperH. Currently
+               only SH7757 is supported.
+
                CONFIG_SPI_X
 
                Enables extended (16-bit) SPI EEPROM addressing.