- mpc85xx Files specific to Freescale MPC85xx CPUs
- nios Files specific to Altera NIOS CPUs
- nios2 Files specific to Altera Nios-II CPUs
- - ppc4xx Files specific to IBM PowerPC 4xx CPUs
+ - ppc4xx Files specific to AMCC PowerPC 4xx CPUs
- pxa Files specific to Intel XScale PXA CPUs
- s3c44b0 Files specific to Samsung S3C44B0 CPUs
- sa1100 Files specific to Intel StrongARM SA1100 CPUs
ARM based boards:
-----------------
- CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110,
- CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
- CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
- CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK,
- CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON,
- CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
- CONFIG_TRAB, CONFIG_VCMA9
+ CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
+ CONFIG_DNP1110, CONFIG_EP7312, CONFIG_H2_OMAP1610,
+ CONFIG_HHP_CRADLE, CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510,
+ CONFIG_INNOVATOROMAP1610, CONFIG_LART, CONFIG_LPD7A400,
+ CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
+ CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400,
+ CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9
MicroBlaze based boards:
------------------------
- Console UART Number:
CONFIG_UART1_CONSOLE
- IBM PPC4xx only.
+ AMCC PPC4xx only.
If defined internal UART1 (and not UART0) is used
as default U-Boot console.
allows for a "silent" boot where a splash screen is
loaded very quickly after power-on.
+- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
+
+ If this option is set, additionally to standard BMP
+ images, gzipped BMP images can be displayed via the
+ splashscreen support or the bmp command.
+
- Compression support:
CONFIG_BZIP2
When SystemACE support is added, the "ace" device type
becomes available to the fat commands, i.e. fatls.
+- TFTP Fixed UDP Port:
+ CONFIG_TFTP_PORT
+
+ If this is defined, the environment variable tftpsrcp
+ is used to supply the TFTP UDP source port value.
+ If tftpsrcp isn't defined, the normal pseudo-random port
+ number generator is used.
+
+ Also, the environment variable tftpdstp is used to supply
+ the TFTP UDP destination port value. If tftpdstp isn't
+ defined, the normal port 69 is used.
+
+ The purpose for tftpsrcp is to allow a TFTP server to
+ blindly start the TFTP transfer using the pre-configured
+ target IP address and UDP port. This has the effect of
+ "punching through" the (Windows XP) firewall, allowing
+ the remainder of the TFTP transfer to proceed normally.
+ A better solution is to properly configure the firewall,
+ but sometimes that is not allowed.
+
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
Useful on scripts which control the retry operation
themselves.
+ tftpsrcport - If this is set, the value is used for TFTP's
+ UDP source port.
+
+ tftpdstport - If this is set, the value is used for TFTP's UDP
+ destination port instead of the Well Know Port 69.
+
vlan - When set to a value < 4095 the traffic over
ethernet is encapsulated/received over 802.1q
VLAN tagged frames.