of options was extracted from the output of './configure --help'. Other
options may be available there:
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
- NOTE: This option is *required* for GIT builds!
- It should *not* be used to build a release.
-
--enable-dummy Enable building the dummy JTAG port driver
--enable-parport Enable building the pc parallel port driver
(for x86 only)
--enable-parport-giveio Enable use of giveio for parport (for CygWin only)
+ --enable-ftdi Enable building support for the MPSSE mode of FTDI
+ based devices, using libusb-1.0 in asynchronous mode
--enable-ft2232_libftdi Enable building support for FT2232 based devices
using the libftdi driver, opensource alternate of
--enable-stlink Enable building support for the ST-Link JTAG
Programmer
+ --enable-ti-icdi Enable building support for the TI/Stellaris ICDI
+ JTAG Programmer
--enable-osbdm Enable building support for the OSBDM (JTAG only)
Programmer
--enable-opendous Enable building support for the estick/opendous JTAG
Programmer
+ --enable-sysfsgpio Enable building support for programming driven via
+ sysfs gpios.
--enable-minidriver-dummy
Enable the dummy minidriver.
--disable-internal-jimtcl
Disable building internal jimtcl
- --enable-libusb0 Use libusb-0.1 library for USB JTAG devices
+
--enable-remote-bitbang Enable building support for the Remote Bitbang jtag
driver
You can download the current GIT version with a GIT client of your
choice from the main repository:
- git://openocd.git.sourceforge.net/gitroot/openocd/openocd
+ git://git.code.sf.net/p/openocd/code
You may prefer to use a mirror:
to set up a local copy of the current repository (make sure there is no
directory called "openocd" in the current directory):
- git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd
+ git clone git://git.code.sf.net/p/openocd/code openocd
Then you can update that at your convenience using
There is also a gitweb interface, which you can use either to browse
the repository or to download arbitrary snapshots using HTTP:
- http://openocd.git.sourceforge.net/git/gitweb.cgi?p=openocd/openocd
http://repo.or.cz/w/openocd.git
Snapshots are compressed tarballs of the source tree, about 1.3 MBytes
---------------------------------------
Building OpenOCD from a repository requires a recent version of the GNU
-autotools (autoconf >= 2.59 and automake >= 1.9).
+autotools (autoconf >= 2.60 and automake >= 1.9).
1) Run './bootstrap' to create the 'configure' script and prepare
the build process for your host system.
-2) Run './configure --enable-maintainer-mode' with other options.
+2) Run './configure' with other options.