ARM: rmobile: Represent SF partitioning with mtdparts on Stout

[u-boot] / README

diff --git a/README b/README
index 6f98e09e680d539246c279a18059c2f38ad7ce10..df1d5d67b4ad72f9aab79b7195609423e3c6d64f 100644 (file)
--- a/README
+++ b/README
@@ -1,9 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
 #
 # (C) Copyright 2000 - 2013
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
 
 Summary:
 ========
@@ -1174,10 +1172,6 @@ The following options need to be configured:
                CONFIG_SUPPORT_EMMC_BOOT
                Enable some additional features of the eMMC boot partitions.
 
-               CONFIG_SUPPORT_EMMC_RPMB
-               Enable the commands for reading, writing and programming the
-               key for the Replay Protection Memory Block partition in eMMC.
-
 - USB Device Firmware Update (DFU) class support:
                CONFIG_DFU_OVER_USB
                This enables the USB portion of the DFU USB class
@@ -2413,19 +2407,6 @@ FIT uImage format:
  -150  common/cmd_nand.c       Incorrect FIT image format
   151  common/cmd_nand.c       FIT image format OK
 
-- legacy image format:
-               CONFIG_IMAGE_FORMAT_LEGACY
-               enables the legacy image format support in U-Boot.
-
-               Default:
-               enabled if CONFIG_FIT_SIGNATURE is not defined.
-
-               CONFIG_DISABLE_IMAGE_LEGACY
-               disable the legacy image format
-
-               This define is introduced, as the legacy image format is
-               enabled per default for backward compatibility.
-
 - Standalone program support:
                CONFIG_STANDALONE_LOAD_ADDR
 
@@ -2710,7 +2691,7 @@ FIT uImage format:
                use an arch-specific makefile fragment instead, for
                example if more than one image needs to be produced.
 
-               CONFIG_FIT_SPL_PRINT
+               CONFIG_SPL_FIT_PRINT
                Printing information about a FIT image adds quite a bit of
                code to SPL. So this is normally disabled in SPL. Use this
                option to re-enable it. This will affect the output of the