pxe: add ipappend support

[u-boot] / README

diff --git a/README b/README
index 6852080c4349bee851f643ad2b29cb6479d6013e..e8359f847d5da916f75fd4467a7fe3e2e46bbc80 100644 (file)
--- a/README
+++ b/README
@@ -413,11 +413,22 @@ The following options need to be configured:
                See Freescale App Note 4493 for more information about
                this erratum.
 
+               CONFIG_A003399_NOR_WORKAROUND
+               Enables a workaround for IFC erratum A003399. It is only
+               requred during NOR boot.
+
                CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
                This is the value to write into CCSR offset 0x18600
                according to the A004510 workaround.
 
+               CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
+               This value denotes start offset of M2 memory
+               which is directly connected to the DSP core.
+
+               CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
+               This value denotes start offset of DSP CCSR space.
+
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
@@ -1261,6 +1272,9 @@ The following options need to be configured:
                CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
                txfilltuning field in the EHCI controller on reset.
 
+               CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
+               interval for usb hub power-on delay.(minimum 100msec)
+
 - USB Device:
                Define the below if you wish to use the USB console.
                Once firmware is rebuilt from a serial console issue the
@@ -3019,6 +3033,14 @@ FIT uImage format:
                CONFIG_SPL_LIBGENERIC_SUPPORT
                Support for lib/libgeneric.o in SPL binary
 
+               CONFIG_SPL_ENV_SUPPORT
+               Support for the environment operating in SPL binary
+
+               CONFIG_SPL_NET_SUPPORT
+               Support for the net/libnet.o in SPL binary.
+               It conflicts with SPL env from storage medium specified by
+               CONFIG_ENV_IS_xxx but CONFIG_ENV_IS_NOWHERE
+
                CONFIG_SPL_PAD_TO
                Image offset to which the SPL should be padded before appending
                the SPL payload. By default, this is defined as
@@ -3961,6 +3983,9 @@ Low Level (hardware related) configuration options:
 - CONFIG_SRIO2:
                Board has SRIO 2 port available
 
+- CONFIG_SRIO_PCIE_BOOT_MASTER
+               Board can support master function for Boot from SRIO and PCIE
+
 - CONFIG_SYS_SRIOn_MEM_VIRT:
                Virtual Address of SRIO port 'n' memory region
 
@@ -4071,6 +4096,11 @@ Low Level (hardware related) configuration options:
                that is executed before the actual U-Boot. E.g. when
                compiling a NAND SPL.
 
+- CONFIG_SYS_MPC85XX_NO_RESETVEC
+               Only for 85xx systems. If this variable is specified, the section
+               .resetvec is not kept and the section .bootpg is placed in the
+               previous 4k of the .text section.
+
 - CONFIG_ARCH_MAP_SYSMEM
                Generally U-Boot (and in particular the md command) uses
                effective address. It is therefore not necessary to regard