x86: qemu: Fix compiler warnings for 64-bit

[u-boot] / README

diff --git a/README b/README
index 25cad2ff01962e0fb7a540773b0a028b08761181..ecb1710d01cca2decd4286f3584e19aecd3026b4 100644 (file)
--- a/README
+++ b/README
@@ -376,15 +376,6 @@ The following options need to be configured:
                Defines the string to utilize when trying to match PCIe device
                tree nodes for the given platform.
 
-               CONFIG_SYS_PPC_E500_DEBUG_TLB
-
-               Enables a temporary TLB entry to be used during boot to work
-               around limitations in e500v1 and e500v2 external debugger
-               support. This reduces the portions of the boot code where
-               breakpoints and single stepping do not work.  The value of this
-               symbol should be set to the TLB1 entry to be used for this
-               purpose.
-
                CONFIG_SYS_FSL_ERRATUM_A004510
 
                Enables a workaround for erratum A004510.  If set,
@@ -513,6 +504,12 @@ The following options need to be configured:
                CONFIG_SYS_FSL_IFC_LE
                Defines the IFC controller register space as Little Endian
 
+               CONFIG_SYS_FSL_IFC_CLK_DIV
+               Defines divider of platform clock(clock input to IFC controller).
+
+               CONFIG_SYS_FSL_LBC_CLK_DIV
+               Defines divider of platform clock(clock input to eLBC controller).
+
                CONFIG_SYS_FSL_PBL_PBI
                It enables addition of RCW (Power on reset configuration) in built image.
                Please refer doc/README.pblimage for more details
@@ -1466,9 +1463,6 @@ The following options need to be configured:
                        CONFIG_SH_MMCIF_CLK
                        Define the clock frequency for MMCIF
 
-               CONFIG_GENERIC_MMC
-               Enable the generic MMC driver
-
                CONFIG_SUPPORT_EMMC_BOOT
                Enable some additional features of the eMMC boot partitions.
 
@@ -2042,7 +2036,7 @@ The following options need to be configured:
 
                A byte containing the id of the VLAN.
 
-- Status LED:  CONFIG_STATUS_LED
+- Status LED:  CONFIG_LED_STATUS
 
                Several configurations allow to display the current
                status using a LED. For instance, the LED will blink
@@ -2050,15 +2044,15 @@ The following options need to be configured:
                soon as a reply to a BOOTP request was received, and
                start blinking slow once the Linux kernel is running
                (supported by a status LED driver in the Linux
-               kernel). Defining CONFIG_STATUS_LED enables this
+               kernel). Defining CONFIG_LED_STATUS enables this
                feature in U-Boot.
 
                Additional options:
 
-               CONFIG_GPIO_LED
+               CONFIG_LED_STATUS_GPIO
                The status LED can be connected to a GPIO pin.
                In such cases, the gpio_led driver can be used as a
-               status LED backend implementation. Define CONFIG_GPIO_LED
+               status LED backend implementation. Define CONFIG_LED_STATUS_GPIO
                to include the gpio_led driver in the U-Boot binary.
 
                CONFIG_GPIO_LED_INVERTED_TABLE
@@ -4593,12 +4587,6 @@ Low Level (hardware related) configuration options:
                addressable memory. This option causes some memory accesses
                to be mapped through map_sysmem() / unmap_sysmem().
 
-- CONFIG_USE_ARCH_MEMCPY
-  CONFIG_USE_ARCH_MEMSET
-               If these options are used a optimized version of memcpy/memset will
-               be used if available. These functions may be faster under some
-               conditions but may increase the binary size.
-
 - CONFIG_X86_RESET_VECTOR
                If defined, the x86 reset vector code is included. This is not
                needed when U-Boot is running from Coreboot.