- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
- mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
+ - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs
+ - mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs
- mips Files specific to MIPS CPUs
- mpc5xx Files specific to Freescale MPC5xx CPUs
- mpc5xxx Files specific to Freescale MPC5xxx CPUs
- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS.
- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
- Define exactly one of
- CONFIG_ATSTK1002
-
+ Define exactly one, e.g. CONFIG_ATSTK1002
- CPU Module Type: (if CONFIG_COGENT is defined)
Define exactly one of
CONFIG_OF_LIBFDT
* New libfdt-based support
* Adds the "fdt" command
- * The bootm command does _not_ modify the fdt
+ * The bootm command automatically updates the fdt
CONFIG_OF_FLAT_TREE
* Deprecated, see CONFIG_OF_LIBFDT
* The environment variable "disable_of", when set,
disables this functionality.
- CONFIG_OF_FLAT_TREE_MAX_SIZE
-
- The maximum size of the constructed OF tree.
-
OF_CPU - The proper name of the cpus node.
OF_SOC - The proper name of the soc node.
OF_TBCLK - The timebase frequency.
OF_STDOUT_PATH - The path to the console device
+ boards with QUICC Engines require OF_QE to set UCC mac addresses
+
CONFIG_OF_HAS_BD_T
* CONFIG_OF_LIBFDT - enables the "fdt bd_t" command
CONFIG_OF_HAS_UBOOT_ENV
- * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command
+ * CONFIG_OF_LIBFDT - enables the "fdt env" command
* CONFIG_OF_FLAT_TREE - The resulting flat device tree
will have a copy of u-boot's environment variables
(i.e. setenv videomode 317; saveenv; reset;)
- "videomode=bootargs" all the video parameters are parsed
- from the bootargs. (See drivers/videomodes.c)
+ from the bootargs. (See drivers/video/videomodes.c)
CONFIG_VIDEO_SED13806
CONFIG_FSL_I2C
Define this option if you want to use Freescale's I2C driver in
- drivers/fsl_i2c.c.
+ drivers/i2c/fsl_i2c.c.
- SPI Support: CONFIG_SPI
SPI configuration items (port pins to use, etc). For
an example, see include/configs/sacsng.h.
-- FPGA Support: CONFIG_FPGA_COUNT
+- FPGA Support: CONFIG_FPGA
- Specify the number of FPGA devices to support.
+ Enables FPGA subsystem.
- CONFIG_FPGA
+ CONFIG_FPGA_<vendor>
- Used to specify the types of FPGA devices. For example,
- #define CONFIG_FPGA CFG_XILINX_VIRTEX2
+ Enables support for specific chip vendors.
+ (ALTERA, XILINX)
+
+ CONFIG_FPGA_<family>
+
+ Enables support for FPGA family.
+ (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
+
+ CONFIG_FPGA_COUNT
+
+ Specify the number of FPGA devices to support.
CFG_FPGA_PROG_FEEDBACK
to be a good choice since it makes it far enough from the
start of the data area as well as from the stack pointer.
-Please note that the environment is read-only as long as the monitor
+Please note that the environment is read-only until the monitor
has been relocated to RAM and a RAM copy of the environment has been
created; also, when using EEPROM you will have to use getenv_r()
until then to read environment variables.
enable I2C microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [DSP2]
+- CFG_SMC_UCODE_PATCH, CFG_SMC_DPMEM_OFFSET [0x1FC0]:
+ enable SMC microcode relocation patch (MPC8xx);
+ define relocation offset in DPRAM [SMC1]
+
- CFG_SPI_UCODE_PATCH, CFG_SPI_DPMEM_OFFSET [0x1FC0]:
enable SPI microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [SCC4]