TCL/SPEAr: move device specific code

[openocd] / README

diff --git a/README b/README
index 741432302e613de2b2ab589c41f2321fbdefcc8b..f49dd31fb1cbd85877581f6e7bc802aeddca12a9 100644 (file)
--- a/README
+++ b/README
@@ -23,10 +23,10 @@ In addition to in-tree documentation, the latest documentation may be
 viewed on-line at the following URLs:
 
  OpenOCD User's Guide:
-    http://openocd.berlios.de/doc/html/index.html
+    http://openocd.sourceforge.net/doc/html/index.html
 
  OpenOCD Developer's Manual:
-    http://openocd.berlios.de/doc/doxygen/index.html
+    http://openocd.sourceforge.net/doc/doxygen/html/index.html
 
 These reflect the latest development versions, so the following section
 introduces how to build the complete documentation from the package.
@@ -35,7 +35,7 @@ introduces how to build the complete documentation from the package.
 For more information, refer to these documents or contact the developers
 by subscribing to the OpenOCD developer mailing list:
 
-       openocd-development@lists.berlios.de
+       openocd-devel@lists.sourceforge.net
 
 Building the OpenOCD Documentation
 ----------------------------------
@@ -64,8 +64,8 @@ you can build the in-tree documentation.
 Installing OpenOCD
 ==================
 
-On Linux, you may have permissions problems to address.  The best
-way to do this is to use the contrib/udev.rules file.  It probably
+On Linux, you may have permissions problems to address.  The best way
+to do this is to use the contrib/openocd.udev rules file.  It probably
 belongs somewhere in /etc/udev/rules.d, but consult your operating
 system documentation to be sure.  In particular, make sure that it
 matches the syntax used by your operating system's version of udev.
@@ -236,6 +236,8 @@ options may be available there:
                           Programmer
   --enable-rlink          Enable building support for the Raisonance RLink
                           JTAG Programmer
+  --enable-ulink          Enable building support for the Keil ULINK JTAG
+                          Programmer
   --enable-usbprog        Enable building support for the usbprog JTAG
                           Programmer
   --enable-vsllink        Enable building support for the Versaloon-Link JTAG
@@ -255,8 +257,9 @@ options may be available there:
 
   --enable-ioutil         Enable ioutil functions - useful for standalone
                           OpenOCD implementations
-  --enable-httpd          Enable builtin httpd server - useful for standalone
-                          OpenOCD implementations
+
+  --disable-doxygen-html Disable building Doxygen manual as HTML.
+  --enable-doxygen-pdf   Enable building Doxygen manual as PDF.
 
 Miscellaneous Configure Options
 -------------------------------
@@ -314,7 +317,7 @@ The libftdi source code can be download from the following website:
 
 For both Linux and Windows, both libusb and libftdi must be built and
 installed.  To use the newer FT2232H chips, supporting RTCK and USB high
-speed (480 Mbps), you need libftdi version 0.16 or newer.  Many Linux
+speed (480 Mbps), use libftdi version 0.17 or newer.  Many Linux
 distributions provide suitable packages for these libraries.
 
 For Windows, libftdi is supported with versions 0.14 and later.
@@ -335,7 +338,7 @@ all operating systems used with OpenOCD.  You may, however, build such
 copies for personal use.
 
 The FTDICHIP drivers come as either a (win32) ZIP file, or a (Linux)
-TAR.GZ file. You must unpack them ``some where'' convient. As of this
+TAR.GZ file. You must unpack them ``some where'' convenient. As of this
 writing FTDICHIP does not supply means to install these files "in an
 appropriate place."
 
@@ -385,6 +388,11 @@ choice from the main repository:
 
    git://openocd.git.sourceforge.net/gitroot/openocd/openocd
 
+You may prefer to use a mirror:
+
+   http://repo.or.cz/r/openocd.git
+   git://repo.or.cz/openocd.git
+
 Using the GIT command line client, you might use the following command
 to set up a local copy of the current repository (make sure there is no
 directory called "openocd" in the current directory):
@@ -396,9 +404,10 @@ Then you can update that at your convenience using
    git pull
 
 There is also a gitweb interface, which you can use either to browse
-the repository or to downlad arbitrary snapshots using HTTP:
+the repository or to download arbitrary snapshots using HTTP:
 
    http://openocd.git.sourceforge.net/git/gitweb.cgi?p=openocd/openocd
+   http://repo.or.cz/w/openocd.git
 
 Snapshots are compressed tarballs of the source tree, about 1.3 MBytes
 each at this writing.