Add list of JTAG adapter drivers with TAP_RESET statemove bug.

[openocd] / TODO

diff --git a/TODO b/TODO
index 2e87d5107c7e3de95a3deadd8b2500b215fb15e9..a2ee398bfb32ee0cf49d383a8c4335044ca6a545 100644 (file)
--- a/TODO
+++ b/TODO
@@ -60,6 +60,22 @@ The following tasks have been suggested for adding new core JTAG support:
 
 @subsection thelistjtaginterfaces JTAG Interfaces
 
+There are some known bugs to fix in JTAG adapter drivers:
+
+- For JTAG_STATEMOVE to TAP_RESET, all drivers must ignore the current
+  recorded state.  The tap_get_state() call won't necessarily return
+  the correct value, especially at server startup.  Fix is easy:  in
+  that case, always issue five clocks with TMS high.
+  - amt_jtagaccel.c
+  - arm-jtag-ew.c
+  - bitbang.c
+  - bitq.c
+  - gw16012.c
+  - jlink.c
+  - usbprog.c
+  - vsllink.c
+  - rlink/rlink.c
+
 The following tasks have been suggeted for improving OpenOCD's JTAG
 interface support:
 
@@ -69,7 +85,7 @@ interface support:
 - J-Link driver:
   - fix to work with long scan chains, such as R.Doss's svf test.
 - FT2232 (libftdi):
-  - make performance comparable to alternatives
+  - make performance comparable to alternatives (on Win32, D2XX is faster)
   - make usability comparable to alternatives
 
 The following tasks have been suggested for adding new JTAG interfaces:
@@ -114,13 +130,32 @@ Once the above are completed:
   https://lists.berlios.de/pipermail/openocd-development/2009-July/009426.html
 - regression: "reset halt" between 729(works) and 788(fails): @par
 https://lists.berlios.de/pipermail/openocd-development/2009-July/009206.html
+- ARM7/9:
+  - add reset option to allow programming embedded ice while srst is asserted.
+  Some CPUs will gate the JTAG clock when srst is asserted and in this case,
+  it is necessary to program embedded ice and then assert srst afterwards.
 - ARM923EJS:
   - reset run/halt/step is not robust; needs testing to map out problems.
 - ARM11 improvements (MB?)
-  - fix single stepping  (reported by �H)
+  - fix single stepping  (reported by ØH). Need to automatically
+  use hardware stepping if available.
+  - hunt down and add timeouts to all infinite loops, e.g. arm11_run_instr_no_data would
+    lock up in infinite loop if e.g. an "mdh" command tries to read memory from invalid memory location.
+    Try mdh 0x40000000 on i.MX31 PDK
+  - mdb can return garbage data if read byte operation fails for
+  a memory region(16 & 32 byte access modes may be supported). Is this
+  a bug in the .MX31 PDK init script? Try on i.MX31 PDK: 
+  mdw 0xb80005f0 0x8, mdh 0xb80005f0 0x10, mdb 0xb80005f0 0x20. mdb returns
+  garabage.
   - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...)
+  - thumb support is missing: ISTR ARMv6 requires Thumb.
+  ARM1156 has Thumb2; ARM1136 doesn't.
 - Cortex A8 support (ML)
   - add target implementation (ML)
+- Generic ARM run_algorithm() interface
+  - tagged struct wrapping ARM instructions and metadata
+  - not revision-specific (current: ARMv4+ARMv5 -or- ARMv6 -or- ARMv7)
+  - usable with at least arm_nandwrite() and generic CFI drivers
 - MC1322x support (JW/DE?)
   - integrate and test support from JW (and DE?)
   - get working with a known good interface (i.e. not today's jlink)
@@ -149,14 +184,6 @@ https://lists.berlios.de/pipermail/openocd-development/2009-July/009206.html
 
 @section thelistflash Flash Support
 
-- aduc702x segfault reported by Thomas A Moulton
-
-https://lists.berlios.de/pipermail/openocd-development/2009-July/009186.html
-
-- aduc7024 programming w/working area does not work:
-
-https://lists.berlios.de/pipermail/openocd-development/2009-July/009337.html
-
 - finish documentation for the following flash drivers:
   - avr
   - ecosflash
@@ -169,7 +196,7 @@ https://lists.berlios.de/pipermail/openocd-development/2009-July/009337.html
 - finish implementing bus width/chip width handling (suggested by NC)
 - factor vendor-specific code into separate source files
   - add new callback interface for vendor-specific code
-- investigate/implement "thin wrapper" to use eCos CFI drivers (�H)
+- investigate/implement "thin wrapper" to use eCos CFI drivers (ØH)
 
 @section thelistdebug Debugger Support