spl: add hierarchical defaults for SPL_LDSCRIPT

[u-boot] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dce41055619bae5ce28e97970513c69a7f203b73..39b001fd531fb21f9cdbdce838fdb6ec13ac5bfc 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -253,7 +253,7 @@ config USE_ARCH_MEMCPY
          but may increase the binary size.
 
 config SPL_USE_ARCH_MEMCPY
-       bool "Use an assembly optimized implementation of memcpy"
+       bool "Use an assembly optimized implementation of memcpy for SPL"
        default y if USE_ARCH_MEMCPY
        depends on !ARM64
        help
@@ -271,7 +271,7 @@ config USE_ARCH_MEMSET
          but may increase the binary size.
 
 config SPL_USE_ARCH_MEMSET
-       bool "Use an assembly optimized implementation of memset"
+       bool "Use an assembly optimized implementation of memset for SPL"
        default y if USE_ARCH_MEMSET
        depends on !ARM64
        help
@@ -308,6 +308,7 @@ config TARGET_GPLUGD
 config ARCH_DAVINCI
        bool "TI DaVinci"
        select CPU_ARM926EJS
+       imply CMD_SAVES
        help
          Support for TI's DaVinci platform.
 
@@ -409,21 +410,25 @@ config TARGET_SPEAR300
        bool "Support spear300"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_SPEAR310
        bool "Support spear310"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_SPEAR320
        bool "Support spear320"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_SPEAR600
        bool "Support spear600"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_STV0991
        bool "Support stv0991"
@@ -488,6 +493,7 @@ config ARCH_BCM283X
        select DM_GPIO
        select OF_CONTROL
        imply FAT_WRITE
+       imply ENV_IS_IN_FAT
 
 config TARGET_VEXPRESS_CA15_TC2
        bool "Support vexpress_ca15_tc2"
@@ -522,6 +528,9 @@ config TARGET_BCMCYGNUS
        imply CMD_HASH
        imply FAT_WRITE
        imply HASH_VERIFY
+       imply NETDEVICES
+       imply BCM_SF2_ETH
+       imply BCM_SF2_ETH_GMAC
 
 config TARGET_BCMNSP
        bool "Support bcmnsp"
@@ -569,7 +578,9 @@ config ARCH_KEYSTONE
        select SUPPORT_SPL
        select SYS_THUMB_BUILD
        select CMD_POWEROFF
+       imply CMD_MTDPARTS
        imply FIT
+       imply CMD_SAVES
 
 config ARCH_OMAP2PLUS
        bool "TI OMAP2+"
@@ -607,6 +618,11 @@ config ARCH_MX6
        select SYS_FSL_SEC_LE
        select SYS_THUMB_BUILD if SPL
 
+if ARCH_MX6
+config SPL_LDSCRIPT
+        default "arch/arm/mach-omap2/u-boot-spl.lds"
+endif
+
 config ARCH_MX5
        bool "Freescale MX5"
        select CPU_V7
@@ -649,6 +665,7 @@ config ARCH_SOCFPGA
        select ARCH_MISC_INIT
        select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
        select SYS_THUMB_BUILD
+       imply CMD_MTDPARTS
        imply CRC32_VERIFY
        imply FAT_WRITE
 
@@ -666,8 +683,8 @@ config ARCH_SUNXI
        select OF_BOARD_SETUP
        select OF_CONTROL
        select OF_SEPARATE
-       select SPL_STACK_R if SUPPORT_SPL
-       select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
+       select SPL_STACK_R if SPL
+       select SPL_SYS_MALLOC_SIMPLE if SPL
        select SYS_NS16550
        select SPL_SYS_THUMB_BUILD if !ARM64
        select USB if DISTRO_DEFAULTS
@@ -693,6 +710,8 @@ config ARCH_VF610
        bool "Freescale Vybrid"
        select CPU_V7
        select SYS_FSL_ERRATUM_ESDHC111
+       imply CMD_MTDPARTS
+       imply NAND
 
 config ARCH_ZYNQ
        bool "Xilinx Zynq Platform"
@@ -719,6 +738,7 @@ config ARCH_ZYNQ
        select CLK_ZYNQ
        imply CMD_CLK
        imply FAT_WRITE
+       imply CMD_SPL
 
 config ARCH_ZYNQMP
        bool "Support Xilinx ZynqMP Platform"
@@ -792,6 +812,7 @@ config TARGET_LS2080AQDS
        select BOARD_LATE_INIT
        select SUPPORT_SPL
        select ARCH_MISC_INIT
+       imply SCSI
        help
          Support for Freescale LS2080AQDS platform
          The LS2080A Development System (QDS) is a high-performance
@@ -806,6 +827,7 @@ config TARGET_LS2080ARDB
        select BOARD_LATE_INIT
        select SUPPORT_SPL
        select ARCH_MISC_INIT
+       imply SCSI
        help
          Support for Freescale LS2080ARDB platform.
          The LS2080A Reference design board (RDB) is a high-performance
@@ -837,6 +859,19 @@ config TARGET_HIKEY
          Support for HiKey 96boards platform. It features a HI6220
          SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 
+config TARGET_POPLAR
+       bool "Support Poplar 96boards Enterprise Edition Platform"
+       select ARM64
+       select DM
+       select OF_CONTROL
+       select DM_SERIAL
+       select DM_USB
+         help
+         Support for Poplar 96boards EE platform. It features a HI3798cv200
+         SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
+         making it capable of running any commercial set-top solution based on
+         Linux or Android.
+
 config TARGET_LS1012AQDS
        bool "Support ls1012aqds"
        select ARCH_LS1012A
@@ -853,6 +888,7 @@ config TARGET_LS1012ARDB
        select ARCH_LS1012A
        select ARM64
        select BOARD_LATE_INIT
+       imply SCSI
        help
          Support for Freescale LS1012ARDB platform.
          The LS1012A Reference design board (RDB) is a high-performance
@@ -881,6 +917,7 @@ config TARGET_LS1021AQDS
        select LS1_DEEP_SLEEP
        select SYS_FSL_DDR
        select BOARD_EARLY_INIT_F
+       imply SCSI
 
 config TARGET_LS1021ATWR
        bool "Support ls1021atwr"
@@ -893,6 +930,7 @@ config TARGET_LS1021ATWR
        select ARCH_SUPPORT_PSCI
        select LS1_DEEP_SLEEP
        select BOARD_EARLY_INIT_F
+       imply SCSI
 
 config TARGET_LS1021AIOT
        bool "Support ls1021aiot"
@@ -903,6 +941,7 @@ config TARGET_LS1021AIOT
        select SUPPORT_SPL
        select ARCH_LS1021A
        select ARCH_SUPPORT_PSCI
+       imply SCSI
        help
          Support for Freescale LS1021AIOT platform.
          The LS1021A Freescale board (IOT) is a high-performance
@@ -917,6 +956,7 @@ config TARGET_LS1043AQDS
        select BOARD_LATE_INIT
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       imply SCSI
        help
          Support for Freescale LS1043AQDS platform.
 
@@ -928,6 +968,7 @@ config TARGET_LS1043ARDB
        select BOARD_LATE_INIT
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       imply SCSI
        help
          Support for Freescale LS1043ARDB platform.
 
@@ -940,6 +981,7 @@ config TARGET_LS1046AQDS
        select SUPPORT_SPL
        select DM_SPI_FLASH if DM_SPI
        select BOARD_EARLY_INIT_F
+       imply SCSI
        help
          Support for Freescale LS1046AQDS platform.
          The LS1046A Development System (QDS) is a high-performance
@@ -956,6 +998,7 @@ config TARGET_LS1046ARDB
        select DM_SPI_FLASH if DM_SPI
        select POWER_MC34VR500
        select BOARD_EARLY_INIT_F
+       imply SCSI
        help
          Support for Freescale LS1046ARDB platform.
          The LS1046A Reference Design Board (RDB) is a high-performance
@@ -996,6 +1039,7 @@ config ARCH_UNIPHIER
        select SPL_PINCTRL if SPL
        select SUPPORT_SPL
        imply FAT_WRITE
+       imply ENV_IS_IN_MMC
        help
          Support for UniPhier SoC family developed by Socionext Inc.
          (formerly, System LSI Business Division of Panasonic Corporation)
@@ -1075,13 +1119,13 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
 
-source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
+source "arch/arm/mach-imx/mx7ulp/Kconfig"
 
-source "arch/arm/cpu/armv7/mx7/Kconfig"
+source "arch/arm/mach-imx/mx7/Kconfig"
 
-source "arch/arm/cpu/armv7/mx6/Kconfig"
+source "arch/arm/mach-imx/mx6/Kconfig"
 
-source "arch/arm/cpu/armv7/mx5/Kconfig"
+source "arch/arm/mach-imx/mx5/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
@@ -1121,7 +1165,7 @@ source "arch/arm/cpu/armv8/zynqmp/Kconfig"
 
 source "arch/arm/cpu/armv8/Kconfig"
 
-source "arch/arm/imx-common/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "board/aries/m28evk/Kconfig"
 source "board/bosch/shc/Kconfig"
@@ -1165,6 +1209,7 @@ source "board/grinn/chiliboard/Kconfig"
 source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
+source "board/hisilicon/poplar/Kconfig"
 source "board/imx31_phycore/Kconfig"
 source "board/isee/igep003x/Kconfig"
 source "board/olimex/mx23_olinuxino/Kconfig"
@@ -1193,3 +1238,10 @@ source "board/zipitz2/Kconfig"
 source "arch/arm/Kconfig.debug"
 
 endmenu
+
+config SPL_LDSCRIPT
+        default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
+        default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+       default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
+
+