Merge git://git.denx.de/u-boot-i2c

[u-boot] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f7b44392ac89ee76e2b9475b8ecb061da854c7bb..53d0831935c40bf2ac4500af54b73c6dce38361a 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -97,6 +97,9 @@ config ARM_ERRATA_833069
 config ARM_ERRATA_833471
        bool
 
+config ARM_ERRATA_845369
+       bool
+
 config ARM_ERRATA_852421
        bool
 
@@ -308,6 +311,7 @@ config TARGET_GPLUGD
 config ARCH_DAVINCI
        bool "TI DaVinci"
        select CPU_ARM926EJS
+       imply CMD_SAVES
        help
          Support for TI's DaVinci platform.
 
@@ -409,21 +413,25 @@ config TARGET_SPEAR300
        bool "Support spear300"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_SPEAR310
        bool "Support spear310"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_SPEAR320
        bool "Support spear320"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_SPEAR600
        bool "Support spear600"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
+       imply CMD_SAVES
 
 config TARGET_STV0991
        bool "Support stv0991"
@@ -522,6 +530,9 @@ config TARGET_BCMCYGNUS
        imply CMD_HASH
        imply FAT_WRITE
        imply HASH_VERIFY
+       imply NETDEVICES
+       imply BCM_SF2_ETH
+       imply BCM_SF2_ETH_GMAC
 
 config TARGET_BCMNSP
        bool "Support bcmnsp"
@@ -569,7 +580,9 @@ config ARCH_KEYSTONE
        select SUPPORT_SPL
        select SYS_THUMB_BUILD
        select CMD_POWEROFF
+       imply CMD_MTDPARTS
        imply FIT
+       imply CMD_SAVES
 
 config ARCH_OMAP2PLUS
        bool "TI OMAP2+"
@@ -607,6 +620,11 @@ config ARCH_MX6
        select SYS_FSL_SEC_LE
        select SYS_THUMB_BUILD if SPL
 
+if ARCH_MX6
+config SPL_LDSCRIPT
+        default "arch/arm/mach-omap2/u-boot-spl.lds"
+endif
+
 config ARCH_MX5
        bool "Freescale MX5"
        select CPU_V7
@@ -649,6 +667,7 @@ config ARCH_SOCFPGA
        select ARCH_MISC_INIT
        select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
        select SYS_THUMB_BUILD
+       imply CMD_MTDPARTS
        imply CRC32_VERIFY
        imply FAT_WRITE
 
@@ -693,6 +712,8 @@ config ARCH_VF610
        bool "Freescale Vybrid"
        select CPU_V7
        select SYS_FSL_ERRATUM_ESDHC111
+       imply CMD_MTDPARTS
+       imply NAND
 
 config ARCH_ZYNQ
        bool "Xilinx Zynq Platform"
@@ -707,7 +728,6 @@ config ARCH_ZYNQ
        select DM_GPIO
        select SPL_DM if SPL
        select DM_MMC
-       select DM_MMC_OPS
        select DM_SPI
        select DM_SERIAL
        select DM_SPI_FLASH
@@ -719,6 +739,7 @@ config ARCH_ZYNQ
        select CLK_ZYNQ
        imply CMD_CLK
        imply FAT_WRITE
+       imply CMD_SPL
 
 config ARCH_ZYNQMP
        bool "Support Xilinx ZynqMP Platform"
@@ -1000,7 +1021,6 @@ config TARGET_COLIBRI_PXA270
 config ARCH_UNIPHIER
        bool "Socionext UniPhier SoCs"
        select BOARD_LATE_INIT
-       select CLK_UNIPHIER
        select DM
        select DM_GPIO
        select DM_I2C
@@ -1054,7 +1074,6 @@ config ARCH_ROCKCHIP
        select DM_GPIO
        select DM_I2C
        select DM_MMC
-       select DM_MMC_OPS
        select DM_SERIAL
        select DM_SPI
        select DM_SPI_FLASH
@@ -1217,3 +1236,10 @@ source "board/zipitz2/Kconfig"
 source "arch/arm/Kconfig.debug"
 
 endmenu
+
+config SPL_LDSCRIPT
+        default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
+        default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+       default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
+
+