config HAS_THUMB2
bool
+# Used for compatibility with asm files copied from the kernel
+config ARM_ASM_UNIFIED
+ bool
+ default y
+
+# Used for compatibility with asm files copied from the kernel
+config THUMB2_KERNEL
+ bool
+
# If set, the workarounds for these ARM errata are applied early during U-Boot
# startup. Note that in general these options force the workarounds to be
# applied; no CPU-type/version detection exists, unlike the similar options in
config ARM_ERRATA_833471
bool
+config ARM_ERRATA_845369
+ bool
+
config ARM_ERRATA_852421
bool
config CPU_V7M
bool
select HAS_THUMB2
+ select THUMB2_KERNEL
select SYS_CACHE_SHIFT_5
config CPU_PXA
but may increase the binary size.
config SPL_USE_ARCH_MEMCPY
- bool "Use an assembly optimized implementation of memcpy"
+ bool "Use an assembly optimized implementation of memcpy for SPL"
default y if USE_ARCH_MEMCPY
depends on !ARM64
help
but may increase the binary size.
config SPL_USE_ARCH_MEMSET
- bool "Use an assembly optimized implementation of memset"
+ bool "Use an assembly optimized implementation of memset for SPL"
default y if USE_ARCH_MEMSET
depends on !ARM64
help
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926EJS
+ imply CMD_SAVES
help
Support for TI's DaVinci platform.
bool "Support spear300"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
+ imply CMD_SAVES
config TARGET_SPEAR310
bool "Support spear310"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
+ imply CMD_SAVES
config TARGET_SPEAR320
bool "Support spear320"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
+ imply CMD_SAVES
config TARGET_SPEAR600
bool "Support spear600"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
+ imply CMD_SAVES
config TARGET_STV0991
bool "Support stv0991"
imply CMD_HASH
imply FAT_WRITE
imply HASH_VERIFY
+ imply NETDEVICES
+ imply BCM_SF2_ETH
+ imply BCM_SF2_ETH_GMAC
config TARGET_BCMNSP
bool "Support bcmnsp"
select SUPPORT_SPL
select SYS_THUMB_BUILD
select CMD_POWEROFF
+ imply CMD_MTDPARTS
imply FIT
+ imply CMD_SAVES
config ARCH_OMAP2PLUS
bool "TI OMAP2+"
select SYS_FSL_SEC_LE
select SYS_THUMB_BUILD if SPL
+if ARCH_MX6
+config SPL_LDSCRIPT
+ default "arch/arm/mach-omap2/u-boot-spl.lds"
+endif
+
config ARCH_MX5
bool "Freescale MX5"
select CPU_V7
select ARCH_MISC_INIT
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
select SYS_THUMB_BUILD
+ imply CMD_MTDPARTS
imply CRC32_VERIFY
imply FAT_WRITE
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
- select SPL_STACK_R if SUPPORT_SPL
- select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
+ select SPL_STACK_R if SPL
+ select SPL_SYS_MALLOC_SIMPLE if SPL
select SYS_NS16550
select SPL_SYS_THUMB_BUILD if !ARM64
select USB if DISTRO_DEFAULTS
bool "Freescale Vybrid"
select CPU_V7
select SYS_FSL_ERRATUM_ESDHC111
+ imply CMD_MTDPARTS
+ imply NAND
config ARCH_ZYNQ
bool "Xilinx Zynq Platform"
select CLK_ZYNQ
imply CMD_CLK
imply FAT_WRITE
+ imply CMD_SPL
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
+ imply SCSI
help
Support for Freescale LS2080AQDS platform
The LS2080A Development System (QDS) is a high-performance
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
+ imply SCSI
help
Support for Freescale LS2080ARDB platform.
The LS2080A Reference design board (RDB) is a high-performance
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
+config TARGET_POPLAR
+ bool "Support Poplar 96boards Enterprise Edition Platform"
+ select ARM64
+ select DM
+ select OF_CONTROL
+ select DM_SERIAL
+ select DM_USB
+ help
+ Support for Poplar 96boards EE platform. It features a HI3798cv200
+ SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
+ making it capable of running any commercial set-top solution based on
+ Linux or Android.
+
config TARGET_LS1012AQDS
bool "Support ls1012aqds"
select ARCH_LS1012A
select ARCH_LS1012A
select ARM64
select BOARD_LATE_INIT
+ imply SCSI
help
Support for Freescale LS1012ARDB platform.
The LS1012A Reference design board (RDB) is a high-performance
select LS1_DEEP_SLEEP
select SYS_FSL_DDR
select BOARD_EARLY_INIT_F
+ imply SCSI
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
select BOARD_EARLY_INIT_F
+ imply SCSI
config TARGET_LS1021AIOT
bool "Support ls1021aiot"
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
+ imply SCSI
help
Support for Freescale LS1021AIOT platform.
The LS1021A Freescale board (IOT) is a high-performance
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1043AQDS platform.
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1043ARDB platform.
select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1046AQDS platform.
The LS1046A Development System (QDS) is a high-performance
select DM_SPI_FLASH if DM_SPI
select POWER_MC34VR500
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1046ARDB platform.
The LS1046A Reference Design Board (RDB) is a high-performance
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
-source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
+source "arch/arm/mach-imx/mx7ulp/Kconfig"
-source "arch/arm/cpu/armv7/mx7/Kconfig"
+source "arch/arm/mach-imx/mx7/Kconfig"
-source "arch/arm/cpu/armv7/mx6/Kconfig"
+source "arch/arm/mach-imx/mx6/Kconfig"
-source "arch/arm/cpu/armv7/mx5/Kconfig"
+source "arch/arm/mach-imx/mx5/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/cpu/armv8/Kconfig"
-source "arch/arm/imx-common/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
source "board/aries/m28evk/Kconfig"
source "board/bosch/shc/Kconfig"
source "board/gumstix/pepper/Kconfig"
source "board/h2200/Kconfig"
source "board/hisilicon/hikey/Kconfig"
+source "board/hisilicon/poplar/Kconfig"
source "board/imx31_phycore/Kconfig"
source "board/isee/igep003x/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "arch/arm/Kconfig.debug"
endmenu
+
+config SPL_LDSCRIPT
+ default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
+ default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+ default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
+
+