ARM_SOC_BOOT0_HOOK which contains the required assembler
preprocessor code.
+config ARCH_OMAP2
+ bool
+ select CPU_V7
+ select SUPPORT_SPL
+
+config ARM64_SUPPORT_AARCH32
+ bool "ARM64 system support AArch32 execution state"
+ default y if ARM64 && !TARGET_THUNDERX_88XX
+ help
+ This ARM64 system supports AArch32 execution state.
+
choice
prompt "Target select"
default TARGET_HIKEY
bool "Support edb93xx"
select CPU_ARM920T
-config TARGET_VCMA9
- bool "Support VCMA9"
- select CPU_ARM920T
-
-config TARGET_SMDK2410
- bool "Support smdk2410"
- select CPU_ARM920T
-
config TARGET_ASPENITE
bool "Support aspenite"
select CPU_ARM926EJS
select DM
select DM_SERIAL
select DM_GPIO
+ select OF_CONTROL
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
config TARGET_BRXRE1
bool "Support BRXRE1"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config TARGET_BRPPT1
bool "Support BRPPT1"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config TARGET_DRACO
bool "Support draco"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_THUBAN
bool "Support thuban"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_RASTABAN
bool "Support rastaban"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_ETAMIN
bool "Support etamin"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_PXM2
bool "Support pxm2"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_RUT
bool "Support rut"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_TI814X_EVM
bool "Support ti814x_evm"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config TARGET_TI816X_EVM
bool "Support ti816x_evm"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select DM
+ select DM_I2C
select DM_SPI_FLASH
select DM_SERIAL
select DM_SPI
select DM
select DM_SERIAL
select DM_GPIO
+ select DM_I2C
config ARCH_HIGHBANK
bool "Calxeda Highbank"
config OMAP34XX
bool "OMAP34XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select USE_TINY_PRINTF
config OMAP44XX
bool "OMAP44XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select USE_TINY_PRINTF
config OMAP54XX
bool "OMAP54XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config AM43XX
bool "AM43XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
help
Support for AM43xx SOC from Texas Instruments.
The AM43xx high performance SOC features a Cortex-A9
config AM33XX
bool "AM33XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
help
Support for AM335x SOC from Texas Instruments.
The AM335x high performance SOC features a Cortex-A8
config TARGET_CM_T43
bool "Support cm_t43"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select CMD_GPIO
select CMD_MMC if MMC
- select CMD_USB
+ select CMD_USB if DISTRO_DEFAULTS
select DM
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
select DM_SERIAL
- select DM_USB
+ select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
select SPL_STACK_R if SUPPORT_SPL
select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
select SYS_NS16550
- select USB
- select USB_STORAGE
- select USB_KEYBOARD
+ select USB if DISTRO_DEFAULTS
+ select USB_STORAGE if DISTRO_DEFAULTS
+ select USB_KEYBOARD if DISTRO_DEFAULTS
select USE_TINY_PRINTF
+config TARGET_TS4600
+ bool "Support TS4600"
+ select CPU_ARM926EJS
+ select SUPPORT_SPL
+
config TARGET_TS4800
bool "Support TS4800"
select CPU_V7
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
+config TARGET_LS1021AIOT
+ bool "Support ls1021aiot"
+ select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
+ select SUPPORT_SPL
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ help
+ Support for Freescale LS1021AIOT platform.
+ The LS1021A Freescale board (IOT) is a high-performance
+ development platform that supports the QorIQ LS1021A
+ Layerscape Architecture processor.
+
config TARGET_LS1043AQDS
bool "Support ls1043aqds"
select ARCH_LS1043A
select DM_GPIO
select DM_I2C
select DM_MMC
+ select DM_RESET
select DM_SERIAL
select DM_USB
select OF_CONTROL
source "arch/arm/cpu/armv7/mx5/Kconfig"
-source "arch/arm/cpu/armv7/omap-common/Kconfig"
+source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
+source "board/freescale/ls1021aiot/Kconfig"
source "board/freescale/ls1046aqds/Kconfig"
source "board/freescale/ls1043ardb/Kconfig"
source "board/freescale/ls1046ardb/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/imx31_phycore/Kconfig"
source "board/isee/igep0033/Kconfig"
-source "board/mpl/vcma9/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/phytec/pcm052/Kconfig"
source "board/ppcag/bg0900/Kconfig"
-source "board/samsung/smdk2410/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
source "board/siemens/draco/Kconfig"
source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
source "board/toradex/colibri_vf/Kconfig"
+source "board/technologic/ts4600/Kconfig"
source "board/technologic/ts4800/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"