arm64: zynqmp: Enable SPL_CLK when SPL is enabled

[u-boot] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 39b001fd531fb21f9cdbdce838fdb6ec13ac5bfc..f2c35e32c64948bdc3e8d030658aab3943aaa1de 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,6 +9,22 @@ config ARM64
        select PHYS_64BIT
        select SYS_CACHE_SHIFT_6
 
+if ARM64
+config POSITION_INDEPENDENT
+       bool "Generate position-independent pre-relocation code"
+       help
+         U-Boot expects to be linked to a specific hard-coded address, and to
+         be loaded to and run from that address. This option lifts that
+         restriction, thus allowing the code to be loaded to and executed
+         from almost any address. This logic relies on the relocation
+         information that is embedded into the binary to support U-Boot
+         relocating itself to the top-of-RAM later during execution.
+endif
+
+config STATIC_RELA
+       bool
+       default y if ARM64 && !POSITION_INDEPENDENT
+
 config DMA_ADDR_T_64BIT
        bool
        default y if ARM64
@@ -97,6 +113,9 @@ config ARM_ERRATA_833069
 config ARM_ERRATA_833471
        bool
 
+config ARM_ERRATA_845369
+       bool
+
 config ARM_ERRATA_852421
        bool
 
@@ -338,17 +357,6 @@ config TARGET_WORK_92105
        select CPU_ARM926EJS
        select SUPPORT_SPL
 
-config TARGET_MX25PDK
-       bool "Support mx25pdk"
-       select BOARD_LATE_INIT
-       select CPU_ARM926EJS
-       select BOARD_EARLY_INIT_F
-
-config TARGET_ZMX25
-       bool "Support zmx25"
-       select BOARD_LATE_INIT
-       select CPU_ARM926EJS
-
 config TARGET_APF27
        bool "Support apf27"
        select CPU_ARM926EJS
@@ -493,7 +501,6 @@ config ARCH_BCM283X
        select DM_GPIO
        select OF_CONTROL
        imply FAT_WRITE
-       imply ENV_IS_IN_FAT
 
 config TARGET_VEXPRESS_CA15_TC2
        bool "Support vexpress_ca15_tc2"
@@ -586,6 +593,7 @@ config ARCH_OMAP2PLUS
        bool "TI OMAP2+"
        select CPU_V7
        select SPL_BOARD_INIT if SPL
+       select SPL_STACK_R if SPL
        select SUPPORT_SPL
        imply FIT
 
@@ -596,6 +604,10 @@ config ARCH_MESON
          targeted at media players and tablet computers. We currently
          support the S905 (GXBaby) 64-bit SoC.
 
+config ARCH_MX25
+       bool "NXP MX25"
+       select CPU_ARM926EJS
+
 config ARCH_MX7ULP
         bool "NXP MX7ULP"
         select CPU_V7
@@ -628,6 +640,14 @@ config ARCH_MX5
        select CPU_V7
        select BOARD_EARLY_INIT_F
 
+config ARCH_QEMU
+       bool "QEMU Virtual Platform"
+       select CPU_V7
+       select ARCH_SUPPORT_PSCI
+       select DM
+       select DM_SERIAL
+       select OF_CONTROL
+
 config ARCH_RMOBILE
        bool "Renesas ARM SoCs"
        select DM
@@ -671,6 +691,7 @@ config ARCH_SOCFPGA
 
 config ARCH_SUNXI
        bool "Support sunxi (Allwinner) SoCs"
+       select BINMAN
        select CMD_GPIO
        select CMD_MMC if MMC
        select CMD_USB if DISTRO_DEFAULTS
@@ -687,10 +708,12 @@ config ARCH_SUNXI
        select SPL_SYS_MALLOC_SIMPLE if SPL
        select SYS_NS16550
        select SPL_SYS_THUMB_BUILD if !ARM64
+       select SYS_THUMB_BUILD if !ARM64
        select USB if DISTRO_DEFAULTS
        select USB_STORAGE if DISTRO_DEFAULTS
        select USB_KEYBOARD if DISTRO_DEFAULTS
        select USE_TINY_PRINTF
+       imply CMD_GPT
        imply FAT_WRITE
        imply PRE_CONSOLE_BUFFER
        imply SPL_GPIO_SUPPORT
@@ -700,6 +723,7 @@ config ARCH_SUNXI
        imply SPL_MMC_SUPPORT if MMC
        imply SPL_POWER_SUPPORT
        imply SPL_SERIAL_SUPPORT
+       imply USB_GADGET
 
 config TARGET_TS4600
        bool "Support TS4600"
@@ -714,7 +738,7 @@ config ARCH_VF610
        imply NAND
 
 config ARCH_ZYNQ
-       bool "Xilinx Zynq Platform"
+       bool "Xilinx Zynq based platform"
        select BOARD_LATE_INIT
        select CPU_V7
        select SUPPORT_SPL
@@ -726,7 +750,6 @@ config ARCH_ZYNQ
        select DM_GPIO
        select SPL_DM if SPL
        select DM_MMC
-       select DM_MMC_OPS
        select DM_SPI
        select DM_SERIAL
        select DM_SPI_FLASH
@@ -741,7 +764,7 @@ config ARCH_ZYNQ
        imply CMD_SPL
 
 config ARCH_ZYNQMP
-       bool "Support Xilinx ZynqMP Platform"
+       bool "Xilinx ZynqMP based platform"
        select ARM64
        select BOARD_LATE_INIT
        select DM
@@ -750,7 +773,7 @@ config ARCH_ZYNQMP
        select SUPPORT_SPL
        select CLK
        select SPL_BOARD_INIT if SPL
-       select SPL_CLK
+       select SPL_CLK if SPL
        select DM_USB if USB
        imply FAT_WRITE
 
@@ -804,6 +827,20 @@ config TARGET_LS2080A_SIMU
          development platform that supports the QorIQ LS2080A
          Layerscape Architecture processor.
 
+config TARGET_LS1088AQDS
+       bool "Support ls1088aqds"
+       select ARCH_LS1088A
+       select ARM64
+       select ARMV8_MULTIENTRY
+       select ARCH_MISC_INIT
+       select BOARD_LATE_INIT
+       select SUPPORT_SPL
+       help
+         Support for NXP LS1088AQDS platform
+         The LS1088A Development System (QDS) is a high-performance
+         development platform that supports the QorIQ LS1088A
+         Layerscape Architecture processor.
+
 config TARGET_LS2080AQDS
        bool "Support ls2080aqds"
        select ARCH_LS2080A
@@ -813,6 +850,7 @@ config TARGET_LS2080AQDS
        select SUPPORT_SPL
        select ARCH_MISC_INIT
        imply SCSI
+       imply SCSI_AHCI
        help
          Support for Freescale LS2080AQDS platform
          The LS2080A Development System (QDS) is a high-performance
@@ -828,6 +866,7 @@ config TARGET_LS2080ARDB
        select SUPPORT_SPL
        select ARCH_MISC_INIT
        imply SCSI
+       imply SCSI_AHCI
        help
          Support for Freescale LS2080ARDB platform.
          The LS2080A Reference design board (RDB) is a high-performance
@@ -889,6 +928,7 @@ config TARGET_LS1012ARDB
        select ARM64
        select BOARD_LATE_INIT
        imply SCSI
+       imply SCSI_AHCI
        help
          Support for Freescale LS1012ARDB platform.
          The LS1012A Reference design board (RDB) is a high-performance
@@ -905,6 +945,20 @@ config TARGET_LS1012AFRDM
          development platform that supports the QorIQ LS1012A
          Layerscape Architecture processor.
 
+config TARGET_LS1088ARDB
+       bool "Support ls1088ardb"
+       select ARCH_LS1088A
+       select ARM64
+       select ARMV8_MULTIENTRY
+       select ARCH_MISC_INIT
+       select BOARD_LATE_INIT
+       select SUPPORT_SPL
+       help
+         Support for NXP LS1088ARDB platform.
+         The LS1088A Reference design board (RDB) is a high-performance
+         development platform that supports the QorIQ LS1088A
+         Layerscape Architecture processor.
+
 config TARGET_LS1021AQDS
        bool "Support ls1021aqds"
        select BOARD_LATE_INIT
@@ -1020,7 +1074,6 @@ config TARGET_COLIBRI_PXA270
 config ARCH_UNIPHIER
        bool "Socionext UniPhier SoCs"
        select BOARD_LATE_INIT
-       select CLK_UNIPHIER
        select DM
        select DM_GPIO
        select DM_I2C
@@ -1039,7 +1092,6 @@ config ARCH_UNIPHIER
        select SPL_PINCTRL if SPL
        select SUPPORT_SPL
        imply FAT_WRITE
-       imply ENV_IS_IN_MMC
        help
          Support for UniPhier SoC family developed by Socionext Inc.
          (formerly, System LSI Business Division of Panasonic Corporation)
@@ -1075,14 +1127,21 @@ config ARCH_ROCKCHIP
        select DM_GPIO
        select DM_I2C
        select DM_MMC
-       select DM_MMC_OPS
        select DM_SERIAL
        select DM_SPI
        select DM_SPI_FLASH
        select DM_USB if USB
        select DM_PWM
        select DM_REGULATOR
+       select ENABLE_ARM_SOC_BOOT0_HOOK
+       imply CMD_FASTBOOT
+       imply FASTBOOT
        imply FAT_WRITE
+       imply USB_FUNCTION_FASTBOOT
+       imply SPL_SYSRESET
+       imply TPL_SYSRESET
+       imply ADC
+       imply SARADC_ROCKCHIP
 
 config TARGET_THUNDERX_88XX
        bool "Support ThunderX 88xx"
@@ -1119,6 +1178,8 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
 
+source "arch/arm/mach-imx/mx2/Kconfig"
+
 source "arch/arm/mach-imx/mx7ulp/Kconfig"
 
 source "arch/arm/mach-imx/mx7/Kconfig"
@@ -1137,6 +1198,8 @@ source "arch/arm/mach-rmobile/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
 
+source "arch/arm/mach-qemu/Kconfig"
+
 source "arch/arm/mach-rockchip/Kconfig"
 
 source "arch/arm/mach-s5pc1xx/Kconfig"
@@ -1187,6 +1250,7 @@ source "board/creative/xfi3/Kconfig"
 source "board/freescale/ls2080a/Kconfig"
 source "board/freescale/ls2080aqds/Kconfig"
 source "board/freescale/ls2080ardb/Kconfig"
+source "board/freescale/ls1088a/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
 source "board/freescale/ls1043aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
@@ -1198,7 +1262,6 @@ source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
 source "board/freescale/mx23evk/Kconfig"
-source "board/freescale/mx25pdk/Kconfig"
 source "board/freescale/mx28evk/Kconfig"
 source "board/freescale/mx31ads/Kconfig"
 source "board/freescale/mx31pdk/Kconfig"
@@ -1224,7 +1287,6 @@ source "board/spear/spear320/Kconfig"
 source "board/spear/spear600/Kconfig"
 source "board/spear/x600/Kconfig"
 source "board/st/stv0991/Kconfig"
-source "board/syteco/zmx25/Kconfig"
 source "board/tcl/sl50/Kconfig"
 source "board/birdland/bav335x/Kconfig"
 source "board/timll/devkit3250/Kconfig"