arm64: zynqmp: Enable SPL_CLK when SPL is enabled

[u-boot] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 64e0ee43f1126cecde6e713d50f887b889a2564b..f2c35e32c64948bdc3e8d030658aab3943aaa1de 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,6 +9,22 @@ config ARM64
        select PHYS_64BIT
        select SYS_CACHE_SHIFT_6
 
+if ARM64
+config POSITION_INDEPENDENT
+       bool "Generate position-independent pre-relocation code"
+       help
+         U-Boot expects to be linked to a specific hard-coded address, and to
+         be loaded to and run from that address. This option lifts that
+         restriction, thus allowing the code to be loaded to and executed
+         from almost any address. This logic relies on the relocation
+         information that is embedded into the binary to support U-Boot
+         relocating itself to the top-of-RAM later during execution.
+endif
+
+config STATIC_RELA
+       bool
+       default y if ARM64 && !POSITION_INDEPENDENT
+
 config DMA_ADDR_T_64BIT
        bool
        default y if ARM64
@@ -341,17 +357,6 @@ config TARGET_WORK_92105
        select CPU_ARM926EJS
        select SUPPORT_SPL
 
-config TARGET_MX25PDK
-       bool "Support mx25pdk"
-       select BOARD_LATE_INIT
-       select CPU_ARM926EJS
-       select BOARD_EARLY_INIT_F
-
-config TARGET_ZMX25
-       bool "Support zmx25"
-       select BOARD_LATE_INIT
-       select CPU_ARM926EJS
-
 config TARGET_APF27
        bool "Support apf27"
        select CPU_ARM926EJS
@@ -599,6 +604,10 @@ config ARCH_MESON
          targeted at media players and tablet computers. We currently
          support the S905 (GXBaby) 64-bit SoC.
 
+config ARCH_MX25
+       bool "NXP MX25"
+       select CPU_ARM926EJS
+
 config ARCH_MX7ULP
         bool "NXP MX7ULP"
         select CPU_V7
@@ -682,6 +691,7 @@ config ARCH_SOCFPGA
 
 config ARCH_SUNXI
        bool "Support sunxi (Allwinner) SoCs"
+       select BINMAN
        select CMD_GPIO
        select CMD_MMC if MMC
        select CMD_USB if DISTRO_DEFAULTS
@@ -698,6 +708,7 @@ config ARCH_SUNXI
        select SPL_SYS_MALLOC_SIMPLE if SPL
        select SYS_NS16550
        select SPL_SYS_THUMB_BUILD if !ARM64
+       select SYS_THUMB_BUILD if !ARM64
        select USB if DISTRO_DEFAULTS
        select USB_STORAGE if DISTRO_DEFAULTS
        select USB_KEYBOARD if DISTRO_DEFAULTS
@@ -727,7 +738,7 @@ config ARCH_VF610
        imply NAND
 
 config ARCH_ZYNQ
-       bool "Xilinx Zynq Platform"
+       bool "Xilinx Zynq based platform"
        select BOARD_LATE_INIT
        select CPU_V7
        select SUPPORT_SPL
@@ -753,7 +764,7 @@ config ARCH_ZYNQ
        imply CMD_SPL
 
 config ARCH_ZYNQMP
-       bool "Support Xilinx ZynqMP Platform"
+       bool "Xilinx ZynqMP based platform"
        select ARM64
        select BOARD_LATE_INIT
        select DM
@@ -762,7 +773,7 @@ config ARCH_ZYNQMP
        select SUPPORT_SPL
        select CLK
        select SPL_BOARD_INIT if SPL
-       select SPL_CLK
+       select SPL_CLK if SPL
        select DM_USB if USB
        imply FAT_WRITE
 
@@ -823,6 +834,7 @@ config TARGET_LS1088AQDS
        select ARMV8_MULTIENTRY
        select ARCH_MISC_INIT
        select BOARD_LATE_INIT
+       select SUPPORT_SPL
        help
          Support for NXP LS1088AQDS platform
          The LS1088A Development System (QDS) is a high-performance
@@ -838,6 +850,7 @@ config TARGET_LS2080AQDS
        select SUPPORT_SPL
        select ARCH_MISC_INIT
        imply SCSI
+       imply SCSI_AHCI
        help
          Support for Freescale LS2080AQDS platform
          The LS2080A Development System (QDS) is a high-performance
@@ -853,6 +866,7 @@ config TARGET_LS2080ARDB
        select SUPPORT_SPL
        select ARCH_MISC_INIT
        imply SCSI
+       imply SCSI_AHCI
        help
          Support for Freescale LS2080ARDB platform.
          The LS2080A Reference design board (RDB) is a high-performance
@@ -914,6 +928,7 @@ config TARGET_LS1012ARDB
        select ARM64
        select BOARD_LATE_INIT
        imply SCSI
+       imply SCSI_AHCI
        help
          Support for Freescale LS1012ARDB platform.
          The LS1012A Reference design board (RDB) is a high-performance
@@ -937,6 +952,7 @@ config TARGET_LS1088ARDB
        select ARMV8_MULTIENTRY
        select ARCH_MISC_INIT
        select BOARD_LATE_INIT
+       select SUPPORT_SPL
        help
          Support for NXP LS1088ARDB platform.
          The LS1088A Reference design board (RDB) is a high-performance
@@ -1117,6 +1133,7 @@ config ARCH_ROCKCHIP
        select DM_USB if USB
        select DM_PWM
        select DM_REGULATOR
+       select ENABLE_ARM_SOC_BOOT0_HOOK
        imply CMD_FASTBOOT
        imply FASTBOOT
        imply FAT_WRITE
@@ -1161,6 +1178,8 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
 
+source "arch/arm/mach-imx/mx2/Kconfig"
+
 source "arch/arm/mach-imx/mx7ulp/Kconfig"
 
 source "arch/arm/mach-imx/mx7/Kconfig"
@@ -1243,7 +1262,6 @@ source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
 source "board/freescale/mx23evk/Kconfig"
-source "board/freescale/mx25pdk/Kconfig"
 source "board/freescale/mx28evk/Kconfig"
 source "board/freescale/mx31ads/Kconfig"
 source "board/freescale/mx31pdk/Kconfig"
@@ -1269,7 +1287,6 @@ source "board/spear/spear320/Kconfig"
 source "board/spear/spear600/Kconfig"
 source "board/spear/x600/Kconfig"
 source "board/st/stv0991/Kconfig"
-source "board/syteco/zmx25/Kconfig"
 source "board/tcl/sl50/Kconfig"
 source "board/birdland/bav335x/Kconfig"
 source "board/timll/devkit3250/Kconfig"