* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <asm/cache.h>
-#include <u-boot/md5.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
-#include <asm/arch/kirkwood.h>
-#include <hush.h>
-
-#define BUFLEN 16
+#include <asm/arch/soc.h>
+#include <mvebu_mmc.h>
void reset_cpu(unsigned long ignored)
{
while (1) ;
}
-/*
- * Generates Ramdom hex number reading some time varient system registers
- * and using md5 algorithm
- */
-unsigned char get_random_hex(void)
-{
- int i;
- u32 inbuf[BUFLEN];
- u8 outbuf[BUFLEN];
-
- /*
- * in case of 88F6281/88F6282/88F6192 A0,
- * Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470
- * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are
- * reserved regs and does not have names at this moment
- * (no errata available)
- */
- writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478);
- for (i = 0; i < BUFLEN; i++) {
- inbuf[i] = readl(KW_REG_UNDOC_0x1470);
- }
- md5((u8 *) inbuf, (BUFLEN * sizeof(u32)), outbuf);
- return outbuf[outbuf[7] % 0x0f];
-}
-
/*
* Window Size
* Used with the Base register to set the address window size and location.
return 0;
}
-/*
- * kw_config_gpio - GPIO configuration
- */
-void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe)
-{
- struct kwgpio_registers *gpio0reg =
- (struct kwgpio_registers *)KW_GPIO0_BASE;
- struct kwgpio_registers *gpio1reg =
- (struct kwgpio_registers *)KW_GPIO1_BASE;
-
- /* Init GPIOS to default values as per board requirement */
- writel(gpp0_oe_val, &gpio0reg->dout);
- writel(gpp1_oe_val, &gpio1reg->dout);
- writel(gpp0_oe, &gpio0reg->oe);
- writel(gpp1_oe, &gpio1reg->oe);
-}
-
-/*
- * kw_config_mpp - Multi-Purpose Pins Functionality configuration
- *
- * Each MPP can be configured to different functionality through
- * MPP control register, ref (sec 6.1 of kirkwood h/w specification)
- *
- * There are maximum 64 Multi-Pourpose Pins on Kirkwood
- * Each MPP functionality can be configuration by a 4bit value
- * of MPP control reg, the value and associated functionality depends
- * upon used SoC varient
- */
-int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31,
- u32 mpp32_39, u32 mpp40_47, u32 mpp48_55)
-{
- u32 *mppreg = (u32 *) KW_MPP_BASE;
-
- /* program mpp registers */
- writel(mpp0_7, &mppreg[0]);
- writel(mpp8_15, &mppreg[1]);
- writel(mpp16_23, &mppreg[2]);
- writel(mpp24_31, &mppreg[3]);
- writel(mpp32_39, &mppreg[4]);
- writel(mpp40_47, &mppreg[5]);
- writel(mpp48_55, &mppreg[6]);
- return 0;
-}
-
/*
* SYSRSTn Duration Counter Support
*
}
debug("Starting %s process...\n", __FUNCTION__);
-#if !defined(CONFIG_SYS_HUSH_PARSER)
- ret = run_command (s, 0);
-#else
- ret = parse_string_outer(s, FLAG_PARSE_SEMICOLON
- | FLAG_EXIT_FROM_LOOP);
-#endif
- if (ret < 0)
+ ret = run_command(s, 0);
+ if (ret != 0)
debug("Error.. %s failed\n", __FUNCTION__);
else
debug("%s process finished\n", __FUNCTION__);
/*
* Configures the I/O voltage of the pads connected to Egigabit
* Ethernet interface to 1.8V
- * By defult it is set to 3.3V
+ * By default it is set to 3.3V
*/
reg = readl(KW_REG_MPP_OUT_DRV_REG);
reg |= (1 << 7);
return 0;
}
#endif
+
+#ifdef CONFIG_MVEBU_MMC
+int board_mmc_init(bd_t *bis)
+{
+ mvebu_mmc_init(bis);
+ return 0;
+}
+#endif /* CONFIG_MVEBU_MMC */