* Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
* Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/imx25-pinmux.h>
#include <asm/arch/clock.h>
-#ifdef CONFIG_MXC_MMC
-#include <asm/arch/mxcmmc.h>
-#endif
#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+
DECLARE_GLOBAL_DATA_PTR;
#endif
return imx_decode_pll(readl(&ccm->mpctl), fref);
}
-ulong imx_get_armclk(void)
+static ulong imx_get_armclk(void)
{
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
ulong cctl = readl(&ccm->cctl);
return fref / div;
}
-ulong imx_get_ahbclk(void)
+static ulong imx_get_ahbclk(void)
{
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
ulong cctl = readl(&ccm->cctl);
return imx_get_ahbclk() / 2;
}
-ulong imx_get_perclk(int clk)
+static ulong imx_get_perclk(int clk)
{
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
ulong fref = imx_get_ahbclk();
(cpurev & 0xF0) >> 4, (cpurev & 0x0F),
((cpurev & 0x8000) ? " unknown" : ""),
strmhz(buf, imx_get_armclk()));
- printf("Reset cause: %s\n\n", get_reset_cause());
+ printf("Reset cause: %s\n", get_reset_cause());
return 0;
}
#endif
#endif
}
+#if defined(CONFIG_FEC_MXC)
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
int cpu_eth_init(bd_t *bis)
{
-#if defined(CONFIG_FEC_MXC)
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
ulong val;
val |= (1 << 23);
writel(val, &ccm->cgr0);
return fecmxc_initialize(bis);
-#else
- return 0;
-#endif
}
+#endif
int get_clocks(void)
{
#ifdef CONFIG_FSL_ESDHC
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#else
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+#endif
#endif
return 0;
}
+#ifdef CONFIG_FSL_ESDHC
/*
* Initializes on-chip MMC controllers.
* to override, implement board_mmc_init()
*/
int cpu_mmc_init(bd_t *bis)
{
-#ifdef CONFIG_MXC_MMC
- return mxc_mmc_init(bis);
-#else
- return 0;
-#endif
+ return fsl_esdhc_mmc_init(bis);
}
-
-#ifdef CONFIG_MXC_UART
-void mx25_uart1_init_pins(void)
-{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 inpadctl;
- u32 outpadctl;
- u32 muxmode0;
-
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
- muxmode0 = MX25_PIN_MUX_MODE(0);
- /*
- * set up input pins with hysteresis and 100K pull-ups
- */
- inpadctl = MX25_PIN_PAD_CTL_HYS
- | MX25_PIN_PAD_CTL_PKE
- | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU;
-
- /*
- * set up output pins with 100K pull-downs
- * FIXME: need to revisit this
- * PUE is ignored if PKE is not set
- * so the right value here is likely
- * 0x0 for no pull up/down
- * or
- * 0xc0 for 100k pull down
- */
- outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
-
- /* UART1 */
- /* rxd */
- writel(muxmode0, &muxctl->pad_uart1_rxd);
- writel(inpadctl, &padctl->pad_uart1_rxd);
-
- /* txd */
- writel(muxmode0, &muxctl->pad_uart1_txd);
- writel(outpadctl, &padctl->pad_uart1_txd);
-
- /* rts */
- writel(muxmode0, &muxctl->pad_uart1_rts);
- writel(outpadctl, &padctl->pad_uart1_rts);
-
- /* cts */
- writel(muxmode0, &muxctl->pad_uart1_cts);
- writel(inpadctl, &padctl->pad_uart1_cts);
-}
-#endif /* CONFIG_MXC_UART */
+#endif
#ifdef CONFIG_FEC_MXC
-void mx25_fec_init_pins(void)
-{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 inpadctl_100kpd;
- u32 inpadctl_22kpu;
- u32 outpadctl;
- u32 muxmode0;
-
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
- muxmode0 = MX25_PIN_MUX_MODE(0);
- inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS
- | MX25_PIN_PAD_CTL_PKE
- | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
- inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS
- | MX25_PIN_PAD_CTL_PKE
- | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU;
- /*
- * set up output pins with 100K pull-downs
- * FIXME: need to revisit this
- * PUE is ignored if PKE is not set
- * so the right value here is likely
- * 0x0 for no pull
- * or
- * 0xc0 for 100k pull down
- */
- outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
-
- /* FEC_TX_CLK */
- writel(muxmode0, &muxctl->pad_fec_tx_clk);
- writel(inpadctl_100kpd, &padctl->pad_fec_tx_clk);
-
- /* FEC_RX_DV */
- writel(muxmode0, &muxctl->pad_fec_rx_dv);
- writel(inpadctl_100kpd, &padctl->pad_fec_rx_dv);
-
- /* FEC_RDATA0 */
- writel(muxmode0, &muxctl->pad_fec_rdata0);
- writel(inpadctl_100kpd, &padctl->pad_fec_rdata0);
-
- /* FEC_TDATA0 */
- writel(muxmode0, &muxctl->pad_fec_tdata0);
- writel(outpadctl, &padctl->pad_fec_tdata0);
-
- /* FEC_TX_EN */
- writel(muxmode0, &muxctl->pad_fec_tx_en);
- writel(outpadctl, &padctl->pad_fec_tx_en);
-
- /* FEC_MDC */
- writel(muxmode0, &muxctl->pad_fec_mdc);
- writel(outpadctl, &padctl->pad_fec_mdc);
-
- /* FEC_MDIO */
- writel(muxmode0, &muxctl->pad_fec_mdio);
- writel(inpadctl_22kpu, &padctl->pad_fec_mdio);
-
- /* FEC_RDATA1 */
- writel(muxmode0, &muxctl->pad_fec_rdata1);
- writel(inpadctl_100kpd, &padctl->pad_fec_rdata1);
-
- /* FEC_TDATA1 */
- writel(muxmode0, &muxctl->pad_fec_tdata1);
- writel(outpadctl, &padctl->pad_fec_tdata1);
-
-}
-
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
int i;
projects / u-boot / blobdiff