*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
+#include <ns16550.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <miiphy.h>
#include <cpsw.h>
#include <asm/errno.h>
+#include <linux/compiler.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
#include <asm/omap_musb.h>
+#include <asm/davinci_rtc.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct gpio_bank gpio_bank_am33xx[4] = {
+#ifdef CONFIG_DM_GPIO
+static const struct omap_gpio_platdata am33xx_gpio[] = {
+ { 0, AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
+ { 1, AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
+ { 2, AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
+ { 3, AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
+#ifdef CONFIG_AM43XX
+ { 4, AM33XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { 5, AM33XX_GPIO5_BASE, METHOD_GPIO_24XX },
+#endif
+};
+
+U_BOOT_DEVICES(am33xx_gpios) = {
+ { "gpio_omap", &am33xx_gpio[0] },
+ { "gpio_omap", &am33xx_gpio[1] },
+ { "gpio_omap", &am33xx_gpio[2] },
+ { "gpio_omap", &am33xx_gpio[3] },
+#ifdef CONFIG_AM43XX
+ { "gpio_omap", &am33xx_gpio[4] },
+ { "gpio_omap", &am33xx_gpio[5] },
+#endif
+};
+
+# ifndef CONFIG_OF_CONTROL
+/*
+ * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove
+ * the CONFIGs. At the same time, we should move this to the board files.
+ */
+static const struct ns16550_platdata am33xx_serial[] = {
+ { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK },
+# ifdef CONFIG_SYS_NS16550_COM2
+ { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK },
+# ifdef CONFIG_SYS_NS16550_COM3
+ { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK },
+# endif
+# endif
+};
+
+U_BOOT_DEVICES(am33xx_uarts) = {
+ { "serial_omap", &am33xx_serial[0] },
+# ifdef CONFIG_SYS_NS16550_COM2
+ { "serial_omap", &am33xx_serial[1] },
+# ifdef CONFIG_SYS_NS16550_COM3
+ { "serial_omap", &am33xx_serial[2] },
+ { "serial_omap", &am33xx_serial[3] },
+ { "serial_omap", &am33xx_serial[4] },
+ { "serial_omap", &am33xx_serial[5] },
+# endif
+# endif
+};
+# endif
+
+#else
+
+static const struct gpio_bank gpio_bank_am33xx[] = {
{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
+#ifdef CONFIG_AM43XX
+ { (void *)AM33XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { (void *)AM33XX_GPIO5_BASE, METHOD_GPIO_24XX },
+#endif
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
+#endif
+
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int cpu_mmc_init(bd_t *bis)
{
return 0;
}
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
-void rtc32k_enable(void)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+/*
+ * In the case of non-SPL based booting we'll want to call these
+ * functions a tiny bit later as it will require gd to be set and cleared
+ * and that's not true in s_init in this case so we cannot do it there.
+ */
+int board_early_init_f(void)
{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+ prcm_init();
+ set_mux_conf_regs();
+
+ return 0;
+}
+
+/*
+ * This function is the place to do per-board things such as ramp up the
+ * MPU clock frequency.
+ */
+__weak void am33xx_spl_board_init(void)
+{
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
+static void rtc32k_enable(void)
+{
+ struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
+ writel(RTC_KICK0R_WE, &rtc->kick0r);
+ writel(RTC_KICK1R_WE, &rtc->kick1r);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
+#endif
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-void uart_soft_reset(void)
+static void uart_soft_reset(void)
{
struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
u32 regval;
regval |= UART_SMART_IDLE_EN;
writel(regval, &uart_base->uartsyscfg);
}
+
+static void watchdog_disable(void)
+{
+ struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+}
+
+void s_init(void)
+{
+ /*
+ * The ROM will only have set up sufficient pinmux to allow for the
+ * first 4KiB NOR to be read, we must finish doing what we know of
+ * the NOR mux in this space in order to continue.
+ */
+#ifdef CONFIG_NOR_BOOT
+ enable_norboot_pin_mux();
+#endif
+ watchdog_disable();
+ set_uart_mux_conf();
+ setup_clocks_for_console();
+ uart_soft_reset();
+#if defined(CONFIG_NOR_BOOT) || defined(CONFIG_QSPI_BOOT)
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init();
+ gd->have_console = 1;
+#endif
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+#endif
+#ifdef CONFIG_SPL_BUILD
+ board_early_init_f();
+ sdram_init();
+#endif
+}
#endif