arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms

[u-boot] / arch / arm / cpu / armv7 / omap-common / config_secure.mk

diff --git a/arch/arm/cpu/armv7/omap-common/config_secure.mk b/arch/arm/cpu/armv7/omap-common/config_secure.mk
deleted file mode 100644 (file)
index 1122439..0000000
--- a/arch/arm/cpu/armv7/omap-common/config_secure.mk
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-# Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-quiet_cmd_mkomapsecimg = MKIMAGE $@
-ifneq ($(TI_SECURE_DEV_PKG),)
-ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh),)
-ifneq ($(CONFIG_SPL_BUILD),)
-cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
-       $(patsubst u-boot-spl_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \
-       $(if $(KBUILD_VERBOSE:1=), >/dev/null)
-else
-cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
-       $(patsubst u-boot_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \
-       $(if $(KBUILD_VERBOSE:1=), >/dev/null)
-endif
-else
-cmd_mkomapsecimg = echo "WARNING:" \
-       "$(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh not found." \
-       "$@ was NOT created!"
-endif
-else
-cmd_mkomapsecimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
-       "variable must be defined for TI secure devices. $@ was NOT created!"
-endif
-
-ifdef CONFIG_SPL_LOAD_FIT
-quiet_cmd_omapsecureimg = SECURE  $@
-ifneq ($(TI_SECURE_DEV_PKG),)
-ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh),)
-cmd_omapsecureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \
-       $< $@ \
-       $(if $(KBUILD_VERBOSE:1=), >/dev/null)
-else
-cmd_omapsecureimg = echo "WARNING:" \
-       "$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \
-       "$@ was NOT created!"; cp $< $@
-endif
-else
-cmd_omapsecureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
-       "variable must be defined for TI secure devices." \
-       "$@ was NOT created!"; cp $< $@
-endif
-endif
-
-
-# Standard X-LOADER target (QPSI, NOR flash)
-u-boot-spl_HS_X-LOADER: $(obj)/u-boot-spl.bin
-       $(call if_changed,mkomapsecimg)
-
-# For MLO targets (SD card boot) the final file name that is copied to the SD
-# card FAT partition must be MLO, so we make a copy of the output file to a new
-# file with that name
-u-boot-spl_HS_MLO: $(obj)/u-boot-spl.bin
-       $(call if_changed,mkomapsecimg)
-       @if [ -f $@ ]; then \
-               cp -f $@ MLO; \
-       fi
-
-# Standard 2ND target (certain peripheral boot modes)
-u-boot-spl_HS_2ND: $(obj)/u-boot-spl.bin
-       $(call if_changed,mkomapsecimg)
-
-# Standard ULO target (certain peripheral boot modes)
-u-boot-spl_HS_ULO: $(obj)/u-boot-spl.bin
-       $(call if_changed,mkomapsecimg)
-
-# Standard ISSW target (certain devices, various boot modes)
-u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin
-       $(call if_changed,mkomapsecimg)
-
-# For SPI flash on AM335x and AM43xx, these require special byte swap handling
-# so we use the SPI_X-LOADER target instead of X-LOADER and let the
-# create-boot-image.sh script handle that
-u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin
-       $(call if_changed,mkomapsecimg)
-
-# For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot
-# file, not an SPL. In this case the mkomapsecimg command looks for a
-# u-boot-HS_* prefix
-u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin
-       $(call if_changed,mkomapsecimg)
-
-# For supporting the SPL loading and interpreting of FIT images whose
-# components are pre-processed before being integrated into the FIT image in
-# order to secure them in some way
-ifdef CONFIG_SPL_LOAD_FIT
-
-MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
-       -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
-       $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
-
-OF_LIST_TARGETS = $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
-$(OF_LIST_TARGETS): dtbs
-
-%_HS.dtb: %.dtb
-       $(call if_changed,omapsecureimg)
-       $(Q)if [ -f $@ ]; then \
-               cp -f $@ $<; \
-       fi
-
-u-boot-nodtb_HS.bin: u-boot-nodtb.bin
-       $(call if_changed,omapsecureimg)
-
-u-boot_HS.img: u-boot-nodtb_HS.bin u-boot.img $(patsubst %.dtb,%_HS.dtb,$(OF_LIST_TARGETS))
-       $(call if_changed,mkimage)
-       $(Q)if [ -f $@ ]; then \
-               cp -f $@ u-boot.img; \
-       fi
-
-endif