*
* Aneesh V <aneesh@ti.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <asm/arch/emif.h>
-#include <asm/arch/clocks.h>
+#include <asm/emif.h>
#include <asm/arch/sys_proto.h>
-#include <asm/omap_common.h>
#include <asm/utils.h>
-static inline u32 emif_num(u32 base)
-{
- if (base == OMAP44XX_EMIF1)
- return 1;
- else if (base == OMAP44XX_EMIF2)
- return 2;
- else
- return 0;
-}
-
-static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
-{
- u32 mr;
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
- writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
- if (omap_revision() == OMAP4430_ES2_0)
- mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
- else
- mr = readl(&emif->emif_lpddr2_mode_reg_data);
- debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
- cs, mr_addr, mr);
- return mr;
-}
-
-static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
- writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
- writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
-}
-
-void emif_reset_phy(u32 base)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 iodft;
-
- iodft = readl(&emif->emif_iodft_tlgc);
- iodft |= OMAP44XX_REG_RESET_PHY_MASK;
- writel(iodft, &emif->emif_iodft_tlgc);
-}
-
-static void do_lpddr2_init(u32 base, u32 cs)
-{
- u32 mr_addr;
-
- /* Wait till device auto initialization is complete */
- while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
- ;
- set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT);
- /*
- * tZQINIT = 1 us
- * Enough loops assuming a maximum of 2GHz
- */
- sdelay(2000);
- set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3);
- set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY);
- /*
- * Enable refresh along with writing MR2
- * Encoding of RL in MR2 is (RL - 2)
- */
- mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK;
- set_mr(base, cs, mr_addr, RL_FINAL - 2);
-}
-
-static void lpddr2_init(u32 base, const struct emif_regs *regs)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- /* Not NVM */
- clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK);
-
- /*
- * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
- * when EMIF_SDRAM_CONFIG register is written
- */
- setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
-
- /*
- * Set the SDRAM_CONFIG and PHY_CTRL for the
- * un-locked frequency & default RL
- */
- writel(regs->sdram_config_init, &emif->emif_sdram_config);
- writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
-
- do_lpddr2_init(base, CS0);
- if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK)
- do_lpddr2_init(base, CS1);
-
- writel(regs->sdram_config, &emif->emif_sdram_config);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
-
- /* Enable refresh now */
- clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
-
-}
-
-static void emif_update_timings(u32 base, const struct emif_regs *regs)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw);
- writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw);
- writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw);
- writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw);
- if (omap_revision() == OMAP4430_ES1_0) {
- /* ES1 bug EMIF should be in force idle during freq_update */
- writel(0, &emif->emif_pwr_mgmt_ctrl);
- } else {
- writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl);
- writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw);
- }
- writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw);
- writel(regs->zq_config, &emif->emif_zq_config);
- writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
-
- if (omap_revision() >= OMAP4460_ES1_0) {
- writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
- &emif->emif_l3_config);
- } else {
- writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0,
- &emif->emif_l3_config);
- }
-}
-
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
-
-static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
-static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
-static u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
-
-/*
- * Organization and refresh requirements for LPDDR2 devices of different
- * types and densities. Derived from JESD209-2 section 2.4
- */
-const struct lpddr2_addressing addressing_table[] = {
- /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */
- {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */
- {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */
- {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */
- {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */
- {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */
- {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */
- {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */
- {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */
- {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */
- {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */
-};
-
-static const u32 lpddr2_density_2_size_in_mbytes[] = {
- 8, /* 64Mb */
- 16, /* 128Mb */
- 32, /* 256Mb */
- 64, /* 512Mb */
- 128, /* 1Gb */
- 256, /* 2Gb */
- 512, /* 4Gb */
- 1024, /* 8Gb */
- 2048, /* 16Gb */
- 4096 /* 32Gb */
-};
-
-/*
- * Calculate the period of DDR clock from frequency value and set the
- * denominator and numerator in global variables for easy access later
- */
-static void set_ddr_clk_period(u32 freq)
-{
- /*
- * period = 1/freq
- * period_in_ns = 10^9/freq
- */
- *T_num = 1000000000;
- *T_den = freq;
- cancel_out(T_num, T_den, 200);
-
-}
-
-/*
- * Convert time in nano seconds to number of cycles of DDR clock
- */
-static inline u32 ns_2_cycles(u32 ns)
-{
- return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num);
-}
-
-/*
- * ns_2_cycles with the difference that the time passed is 2 times the actual
- * value(to avoid fractions). The cycles returned is for the original value of
- * the timing parameter
- */
-static inline u32 ns_x2_2_cycles(u32 ns)
-{
- return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2);
-}
-
-/*
- * Find addressing table index based on the device's type(S2 or S4) and
- * density
- */
-s8 addressing_table_index(u8 type, u8 density, u8 width)
-{
- u8 index;
- if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8))
- return -1;
-
- /*
- * Look at the way ADDR_TABLE_INDEX* values have been defined
- * in emif.h compared to LPDDR2_DENSITY_* values
- * The table is layed out in the increasing order of density
- * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed
- * at the end
- */
- if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb))
- index = ADDR_TABLE_INDEX1GS2;
- else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb))
- index = ADDR_TABLE_INDEX2GS2;
- else
- index = density;
-
- debug("emif: addressing table index %d\n", index);
-
- return index;
-}
-
-/*
- * Find the the right timing table from the array of timing
- * tables of the device using DDR clock frequency
- */
-static const struct lpddr2_ac_timings *get_timings_table(const struct
- lpddr2_ac_timings const *const *device_timings,
- u32 freq)
-{
- u32 i, temp, freq_nearest;
- const struct lpddr2_ac_timings *timings = 0;
-
- emif_assert(freq <= MAX_LPDDR2_FREQ);
- emif_assert(device_timings);
-
- /*
- * Start with the maximum allowed frequency - that is always safe
- */
- freq_nearest = MAX_LPDDR2_FREQ;
- /*
- * Find the timings table that has the max frequency value:
- * i. Above or equal to the DDR frequency - safe
- * ii. The lowest that satisfies condition (i) - optimal
- */
- for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) {
- temp = device_timings[i]->max_freq;
- if ((temp >= freq) && (temp <= freq_nearest)) {
- freq_nearest = temp;
- timings = device_timings[i];
- }
- }
- debug("emif: timings table: %d\n", freq_nearest);
- return timings;
-}
-
-/*
- * Finds the value of emif_sdram_config_reg
- * All parameters are programmed based on the device on CS0.
- * If there is a device on CS1, it will be same as that on CS0 or
- * it will be NVM. We don't support NVM yet.
- * If cs1_device pointer is NULL it is assumed that there is no device
- * on CS1
- */
-static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device,
- const struct lpddr2_device_details *cs1_device,
- const struct lpddr2_addressing *addressing,
- u8 RL)
-{
- u32 config_reg = 0;
-
- config_reg |= (cs0_device->type + 4) << OMAP44XX_REG_SDRAM_TYPE_SHIFT;
- config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
- OMAP44XX_REG_IBANK_POS_SHIFT;
-
- config_reg |= cs0_device->io_width << OMAP44XX_REG_NARROW_MODE_SHIFT;
-
- config_reg |= RL << OMAP44XX_REG_CL_SHIFT;
-
- config_reg |= addressing->row_sz[cs0_device->io_width] <<
- OMAP44XX_REG_ROWSIZE_SHIFT;
-
- config_reg |= addressing->num_banks << OMAP44XX_REG_IBANK_SHIFT;
-
- config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
- OMAP44XX_REG_EBANK_SHIFT;
-
- config_reg |= addressing->col_sz[cs0_device->io_width] <<
- OMAP44XX_REG_PAGESIZE_SHIFT;
-
- return config_reg;
-}
-
-static u32 get_sdram_ref_ctrl(u32 freq,
- const struct lpddr2_addressing *addressing)
-{
- u32 ref_ctrl = 0, val = 0, freq_khz;
- freq_khz = freq / 1000;
- /*
- * refresh rate to be set is 'tREFI * freq in MHz
- * division by 10000 to account for khz and x10 in t_REFI_us_x10
- */
- val = addressing->t_REFI_us_x10 * freq_khz / 10000;
- ref_ctrl |= val << OMAP44XX_REG_REFRESH_RATE_SHIFT;
-
- return ref_ctrl;
-}
-
-static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing)
-{
- u32 tim1 = 0, val = 0;
- val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
- tim1 |= val << OMAP44XX_REG_T_WTR_SHIFT;
-
- if (addressing->num_banks == BANKS8)
- val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
- (4 * (*T_num)) - 1;
- else
- val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
-
- tim1 |= val << OMAP44XX_REG_T_RRD_SHIFT;
-
- val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
- tim1 |= val << OMAP44XX_REG_T_RC_SHIFT;
-
- val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RAS_SHIFT;
-
- val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
- tim1 |= val << OMAP44XX_REG_T_WR_SHIFT;
-
- val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RCD_SHIFT;
-
- val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RP_SHIFT;
-
- return tim1;
-}
-
-static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings,
- const struct lpddr2_min_tck *min_tck)
-{
- u32 tim2 = 0, val = 0;
- val = max(min_tck->tCKE, timings->tCKE) - 1;
- tim2 |= val << OMAP44XX_REG_T_CKE_SHIFT;
-
- val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
- tim2 |= val << OMAP44XX_REG_T_RTP_SHIFT;
-
- /*
- * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
- * same value
- */
- val = ns_2_cycles(timings->tXSR) - 1;
- tim2 |= val << OMAP44XX_REG_T_XSRD_SHIFT;
- tim2 |= val << OMAP44XX_REG_T_XSNR_SHIFT;
-
- val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
- tim2 |= val << OMAP44XX_REG_T_XP_SHIFT;
-
- return tim2;
-}
-
-static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing)
-{
- u32 tim3 = 0, val = 0;
- val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
- tim3 |= val << OMAP44XX_REG_T_RAS_MAX_SHIFT;
-
- val = ns_2_cycles(timings->tRFCab) - 1;
- tim3 |= val << OMAP44XX_REG_T_RFC_SHIFT;
-
- val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
- tim3 |= val << OMAP44XX_REG_T_TDQSCKMAX_SHIFT;
-
- val = ns_2_cycles(timings->tZQCS) - 1;
- tim3 |= val << OMAP44XX_REG_ZQ_ZQCS_SHIFT;
-
- val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
- tim3 |= val << OMAP44XX_REG_T_CKESR_SHIFT;
-
- return tim3;
-}
-
-static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
- const struct lpddr2_addressing *addressing,
- u8 volt_ramp)
-{
- u32 zq = 0, val = 0;
- if (volt_ramp)
- val =
- EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 /
- addressing->t_REFI_us_x10;
- else
- val =
- EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
- addressing->t_REFI_us_x10;
- zq |= val << OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT;
-
- zq |= (REG_ZQ_ZQCL_MULT - 1) << OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT;
-
- zq |= (REG_ZQ_ZQINIT_MULT - 1) << OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT;
-
- zq |= REG_ZQ_SFEXITEN_ENABLE << OMAP44XX_REG_ZQ_SFEXITEN_SHIFT;
-
- /*
- * Assuming that two chipselects have a single calibration resistor
- * If there are indeed two calibration resistors, then this flag should
- * be enabled to take advantage of dual calibration feature.
- * This data should ideally come from board files. But considering
- * that none of the boards today have calibration resistors per CS,
- * it would be an unnecessary overhead.
- */
- zq |= REG_ZQ_DUALCALEN_DISABLE << OMAP44XX_REG_ZQ_DUALCALEN_SHIFT;
-
- zq |= REG_ZQ_CS0EN_ENABLE << OMAP44XX_REG_ZQ_CS0EN_SHIFT;
-
- zq |= (cs1_device ? 1 : 0) << OMAP44XX_REG_ZQ_CS1EN_SHIFT;
-
- return zq;
-}
-
-static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device,
- const struct lpddr2_addressing *addressing,
- u8 is_derated)
-{
- u32 alert = 0, interval;
- interval =
- TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
- if (is_derated)
- interval *= 4;
- alert |= interval << OMAP44XX_REG_TA_REFINTERVAL_SHIFT;
-
- alert |= TEMP_ALERT_CONFIG_DEVCT_1 << OMAP44XX_REG_TA_DEVCNT_SHIFT;
-
- alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << OMAP44XX_REG_TA_DEVWDT_SHIFT;
-
- alert |= 1 << OMAP44XX_REG_TA_SFEXITEN_SHIFT;
-
- alert |= 1 << OMAP44XX_REG_TA_CS0EN_SHIFT;
-
- alert |= (cs1_device ? 1 : 0) << OMAP44XX_REG_TA_CS1EN_SHIFT;
-
- return alert;
-}
-
-static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
-{
- u32 idle = 0, val = 0;
- if (volt_ramp)
- val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1;
- else
- /*Maximum value in normal conditions - suggested by hw team */
- val = 0x1FF;
- idle |= val << OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT;
-
- idle |= EMIF_REG_READ_IDLE_LEN_VAL << OMAP44XX_REG_READ_IDLE_LEN_SHIFT;
-
- return idle;
-}
-
-static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
-{
- u32 phy = 0, val = 0;
-
- phy |= (RL + 2) << OMAP44XX_REG_READ_LATENCY_SHIFT;
-
- if (freq <= 100000000)
- val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
- else if (freq <= 200000000)
- val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
- else
- val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
- phy |= val << OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
-
- /* Other fields are constant magic values. Hardcode them together */
- phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
- OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
-
- return phy;
-}
-
-static u32 get_emif_mem_size(struct emif_device_details *devices)
-{
- u32 size_mbytes = 0, temp;
-
- if (!devices)
- return 0;
-
- if (devices->cs0_device_details) {
- temp = devices->cs0_device_details->density;
- size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
- }
-
- if (devices->cs1_device_details) {
- temp = devices->cs1_device_details->density;
- size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
- }
- /* convert to bytes */
- return size_mbytes << 20;
-}
-
-/* Gets the encoding corresponding to a given DMM section size */
-u32 get_dmm_section_size_map(u32 section_size)
-{
- /*
- * Section size mapping:
- * 0x0: 16-MiB section
- * 0x1: 32-MiB section
- * 0x2: 64-MiB section
- * 0x3: 128-MiB section
- * 0x4: 256-MiB section
- * 0x5: 512-MiB section
- * 0x6: 1-GiB section
- * 0x7: 2-GiB section
- */
- section_size >>= 24; /* divide by 16 MB */
- return log_2_n_round_down(section_size);
-}
-
-static void emif_calculate_regs(
- const struct emif_device_details *emif_dev_details,
- u32 freq, struct emif_regs *regs)
-{
- u32 temp, sys_freq;
- const struct lpddr2_addressing *addressing;
- const struct lpddr2_ac_timings *timings;
- const struct lpddr2_min_tck *min_tck;
- const struct lpddr2_device_details *cs0_dev_details =
- emif_dev_details->cs0_device_details;
- const struct lpddr2_device_details *cs1_dev_details =
- emif_dev_details->cs1_device_details;
- const struct lpddr2_device_timings *cs0_dev_timings =
- emif_dev_details->cs0_device_timings;
-
- emif_assert(emif_dev_details);
- emif_assert(regs);
- /*
- * You can not have a device on CS1 without one on CS0
- * So configuring EMIF without a device on CS0 doesn't
- * make sense
- */
- emif_assert(cs0_dev_details);
- emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM);
- /*
- * If there is a device on CS1 it should be same type as CS0
- * (or NVM. But NVM is not supported in this driver yet)
- */
- emif_assert((cs1_dev_details == NULL) ||
- (cs1_dev_details->type == LPDDR2_TYPE_NVM) ||
- (cs0_dev_details->type == cs1_dev_details->type));
- emif_assert(freq <= MAX_LPDDR2_FREQ);
-
- set_ddr_clk_period(freq);
-
- /*
- * The device on CS0 is used for all timing calculations
- * There is only one set of registers for timings per EMIF. So, if the
- * second CS(CS1) has a device, it should have the same timings as the
- * device on CS0
- */
- timings = get_timings_table(cs0_dev_timings->ac_timings, freq);
- emif_assert(timings);
- min_tck = cs0_dev_timings->min_tck;
-
- temp = addressing_table_index(cs0_dev_details->type,
- cs0_dev_details->density,
- cs0_dev_details->io_width);
-
- emif_assert((temp >= 0));
- addressing = &(addressing_table[temp]);
- emif_assert(addressing);
-
- sys_freq = get_sys_clk_freq();
-
- regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details,
- cs1_dev_details,
- addressing, RL_BOOT);
-
- regs->sdram_config = get_sdram_config_reg(cs0_dev_details,
- cs1_dev_details,
- addressing, RL_FINAL);
-
- regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing);
-
- regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing);
-
- regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck);
-
- regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing);
-
- regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE);
-
- regs->temp_alert_config =
- get_temp_alert_config(cs1_dev_details, addressing, 0);
-
- regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing,
- LPDDR2_VOLTAGE_STABLE);
-
- regs->emif_ddr_phy_ctlr_1_init =
- get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT);
-
- regs->emif_ddr_phy_ctlr_1 =
- get_ddr_phy_ctrl_1(freq, RL_FINAL);
-
- regs->freq = freq;
-
- print_timing_reg(regs->sdram_config_init);
- print_timing_reg(regs->sdram_config);
- print_timing_reg(regs->ref_ctrl);
- print_timing_reg(regs->sdram_tim1);
- print_timing_reg(regs->sdram_tim2);
- print_timing_reg(regs->sdram_tim3);
- print_timing_reg(regs->read_idle_ctrl);
- print_timing_reg(regs->temp_alert_config);
- print_timing_reg(regs->zq_config);
- print_timing_reg(regs->emif_ddr_phy_ctlr_1);
- print_timing_reg(regs->emif_ddr_phy_ctlr_1_init);
-}
-#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM;
+u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN;
+#endif
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
.tFAW = 50
};
-/* Base AC Timing values specified by JESD209-2 for 333 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_333_mhz = {
- .max_freq = 333000000,
- .RL = 5,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 15,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
.max_freq = 200000000,
static const struct lpddr2_ac_timings const*
jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
&timings_jedec_200_mhz,
- &timings_jedec_333_mhz,
&timings_jedec_400_mhz
};
*cs1_device_timings = &jedec_default_timings;
}
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
-
-#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-const char *get_lpddr2_type(u8 type_id)
-{
- switch (type_id) {
- case LPDDR2_TYPE_S4:
- return "LPDDR2-S4";
- case LPDDR2_TYPE_S2:
- return "LPDDR2-S2";
- default:
- return NULL;
- }
-}
-
-const char *get_lpddr2_io_width(u8 width_id)
-{
- switch (width_id) {
- case LPDDR2_IO_WIDTH_8:
- return "x8";
- case LPDDR2_IO_WIDTH_16:
- return "x16";
- case LPDDR2_IO_WIDTH_32:
- return "x32";
- default:
- return NULL;
- }
-}
-
-const char *get_lpddr2_manufacturer(u32 manufacturer)
-{
- switch (manufacturer) {
- case LPDDR2_MANUFACTURER_SAMSUNG:
- return "Samsung";
- case LPDDR2_MANUFACTURER_QIMONDA:
- return "Qimonda";
- case LPDDR2_MANUFACTURER_ELPIDA:
- return "Elpida";
- case LPDDR2_MANUFACTURER_ETRON:
- return "Etron";
- case LPDDR2_MANUFACTURER_NANYA:
- return "Nanya";
- case LPDDR2_MANUFACTURER_HYNIX:
- return "Hynix";
- case LPDDR2_MANUFACTURER_MOSEL:
- return "Mosel";
- case LPDDR2_MANUFACTURER_WINBOND:
- return "Winbond";
- case LPDDR2_MANUFACTURER_ESMT:
- return "ESMT";
- case LPDDR2_MANUFACTURER_SPANSION:
- return "Spansion";
- case LPDDR2_MANUFACTURER_SST:
- return "SST";
- case LPDDR2_MANUFACTURER_ZMOS:
- return "ZMOS";
- case LPDDR2_MANUFACTURER_INTEL:
- return "Intel";
- case LPDDR2_MANUFACTURER_NUMONYX:
- return "Numonyx";
- case LPDDR2_MANUFACTURER_MICRON:
- return "Micron";
- default:
- return NULL;
- }
-}
-
-static void display_sdram_details(u32 emif_nr, u32 cs,
- struct lpddr2_device_details *device)
-{
- const char *mfg_str;
- const char *type_str;
- char density_str[10];
- u32 density;
-
- debug("EMIF%d CS%d\t", emif_nr, cs);
-
- if (!device) {
- debug("None\n");
- return;
- }
-
- mfg_str = get_lpddr2_manufacturer(device->manufacturer);
- type_str = get_lpddr2_type(device->type);
-
- density = lpddr2_density_2_size_in_mbytes[device->density];
- if ((density / 1024 * 1024) == density) {
- density /= 1024;
- sprintf(density_str, "%d GB", density);
- } else
- sprintf(density_str, "%d MB", density);
- if (mfg_str && type_str)
- debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str);
-}
-
-static u8 is_lpddr2_sdram_present(u32 base, u32 cs,
- struct lpddr2_device_details *lpddr2_device)
-{
- u32 mr = 0, temp;
-
- mr = get_mr(base, cs, LPDDR2_MR0);
- if (mr > 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT;
- if (temp) {
- /* Not SDRAM */
- return 0;
- }
- temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT;
-
- if (temp) {
- /* DNV supported - But DNV is only supported for NVM */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR4);
- if (mr > 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR5);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- if (!get_lpddr2_manufacturer(mr)) {
- /* Manufacturer not identified */
- return 0;
- }
- lpddr2_device->manufacturer = mr;
-
- mr = get_mr(base, cs, LPDDR2_MR6);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR7);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR8);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT;
- if (!get_lpddr2_type(temp)) {
- /* Not SDRAM */
- return 0;
- }
- lpddr2_device->type = temp;
-
- temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT;
- if (temp > LPDDR2_DENSITY_32Gb) {
- /* Density not supported */
- return 0;
- }
- lpddr2_device->density = temp;
-
- temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT;
- if (!get_lpddr2_io_width(temp)) {
- /* IO width unsupported value */
- return 0;
- }
- lpddr2_device->io_width = temp;
-
- /*
- * If all the above tests pass we should
- * have a device on this chip-select
- */
- return 1;
-}
-
-struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
- struct lpddr2_device_details *lpddr2_dev_details)
-{
- u32 phy;
- u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- if (!lpddr2_dev_details)
- return NULL;
-
- /* Do the minimum init for mode register accesses */
- if (!running_from_sdram()) {
- phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT);
- writel(phy, &emif->emif_ddr_phy_ctrl_1);
- }
-
- if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details)))
- return NULL;
-
- display_sdram_details(emif_num(base), cs, lpddr2_dev_details);
-
- return lpddr2_dev_details;
-}
-#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */
-
-static void do_sdram_init(u32 base)
-{
- const struct emif_regs *regs;
- u32 in_sdram, emif_nr;
-
- debug(">>do_sdram_init() %x\n", base);
-
- in_sdram = running_from_sdram();
- emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2;
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- emif_get_reg_dump(emif_nr, ®s);
- if (!regs) {
- debug("EMIF: reg dump not provided\n");
- return;
- }
-#else
- /*
- * The user has not provided the register values. We need to
- * calculate it based on the timings and the DDR frequency
- */
- struct emif_device_details dev_details;
- struct emif_regs calculated_regs;
-
- /*
- * Get device details:
- * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set
- * - Obtained from user otherwise
- */
- struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
- emif_reset_phy(base);
- dev_details.cs0_device_details = emif_get_device_details(base, CS0,
- &cs0_dev_details);
- dev_details.cs1_device_details = emif_get_device_details(base, CS1,
- &cs1_dev_details);
- emif_reset_phy(base);
-
- /* Return if no devices on this EMIF */
- if (!dev_details.cs0_device_details &&
- !dev_details.cs1_device_details) {
- emif_sizes[emif_nr - 1] = 0;
- return;
- }
-
- if (!in_sdram)
- emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details);
-
- /*
- * Get device timings:
- * - Default timings specified by JESD209-2 if
- * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set
- * - Obtained from user otherwise
- */
- emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings,
- &dev_details.cs1_device_timings);
-
- /* Calculate the register values */
- emif_calculate_regs(&dev_details, omap4_ddr_clk(), &calculated_regs);
- regs = &calculated_regs;
-#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
-
- /*
- * Initializing the LPDDR2 device can not happen from SDRAM.
- * Changing the timing registers in EMIF can happen(going from one
- * OPP to another)
- */
- if (!in_sdram)
- lpddr2_init(base, regs);
-
- /* Write to the shadow registers */
- emif_update_timings(base, regs);
-
- debug("<<do_sdram_init() %x\n", base);
-}
-
-void sdram_init_pads(void)
-{
- u32 lpddr2io;
- struct control_lpddr2io_regs *lpddr2io_regs =
- (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
- u32 omap4_rev = omap_revision();
-
- if (omap4_rev == OMAP4430_ES1_0)
- lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
- else if (omap4_rev == OMAP4430_ES2_0)
- lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
- else
- return; /* Post ES2.1 reset values will work */
-
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_2);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_2);
-
- writel(CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1, CONTROL_EFUSE_2);
-}
-
-static void emif_post_init_config(u32 base)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 omap4_rev = omap_revision();
-
- /* reset phy on ES2.0 */
- if (omap4_rev == OMAP4430_ES2_0)
- emif_reset_phy(base);
-
- /* Put EMIF back in smart idle on ES1.0 */
- if (omap4_rev == OMAP4430_ES1_0)
- writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
-}
-
-static void dmm_init(u32 base)
-{
- const struct dmm_lisa_map_regs *lisa_map_regs;
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- emif_get_dmm_regs(&lisa_map_regs);
-#else
- u32 emif1_size, emif2_size, mapped_size, section_map = 0;
- u32 section_cnt, sys_addr;
- struct dmm_lisa_map_regs lis_map_regs_calculated = {0};
-
- mapped_size = 0;
- section_cnt = 3;
- sys_addr = CONFIG_SYS_SDRAM_BASE;
- emif1_size = emif_sizes[0];
- emif2_size = emif_sizes[1];
- debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
-
- if (!emif1_size && !emif2_size)
- return;
-
- /* symmetric interleaved section */
- if (emif1_size && emif2_size) {
- mapped_size = min(emif1_size, emif2_size);
- section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
- section_map |= 0 << OMAP44XX_SDRC_ADDR_SHIFT;
- /* only MSB */
- section_map |= (sys_addr >> 24) <<
- OMAP44XX_SYS_ADDR_SHIFT;
- section_map |= get_dmm_section_size_map(mapped_size * 2)
- << OMAP44XX_SYS_SIZE_SHIFT;
- lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
- emif1_size -= mapped_size;
- emif2_size -= mapped_size;
- sys_addr += (mapped_size * 2);
- section_cnt--;
- }
-
- /*
- * Single EMIF section(we can have a maximum of 1 single EMIF
- * section- either EMIF1 or EMIF2 or none, but not both)
- */
- if (emif1_size) {
- section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
- section_map |= get_dmm_section_size_map(emif1_size)
- << OMAP44XX_SYS_SIZE_SHIFT;
- /* only MSB */
- section_map |= (mapped_size >> 24) <<
- OMAP44XX_SDRC_ADDR_SHIFT;
- /* only MSB */
- section_map |= (sys_addr >> 24) << OMAP44XX_SYS_ADDR_SHIFT;
- section_cnt--;
- }
- if (emif2_size) {
- section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
- section_map |= get_dmm_section_size_map(emif2_size) <<
- OMAP44XX_SYS_SIZE_SHIFT;
- /* only MSB */
- section_map |= mapped_size >> 24 << OMAP44XX_SDRC_ADDR_SHIFT;
- /* only MSB */
- section_map |= sys_addr >> 24 << OMAP44XX_SYS_ADDR_SHIFT;
- section_cnt--;
- }
-
- if (section_cnt == 2) {
- /* Only 1 section - either symmetric or single EMIF */
- lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
- lis_map_regs_calculated.dmm_lisa_map_2 = 0;
- lis_map_regs_calculated.dmm_lisa_map_1 = 0;
- } else {
- /* 2 sections - 1 symmetric, 1 single EMIF */
- lis_map_regs_calculated.dmm_lisa_map_2 = section_map;
- lis_map_regs_calculated.dmm_lisa_map_1 = 0;
- }
-
- /* TRAP for invalid TILER mappings in section 0 */
- lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
-
- lisa_map_regs = &lis_map_regs_calculated;
-#endif
- struct dmm_lisa_map_regs *hw_lisa_map_regs =
- (struct dmm_lisa_map_regs *)base;
-
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
-
- writel(lisa_map_regs->dmm_lisa_map_3,
- &hw_lisa_map_regs->dmm_lisa_map_3);
- writel(lisa_map_regs->dmm_lisa_map_2,
- &hw_lisa_map_regs->dmm_lisa_map_2);
- writel(lisa_map_regs->dmm_lisa_map_1,
- &hw_lisa_map_regs->dmm_lisa_map_1);
- writel(lisa_map_regs->dmm_lisa_map_0,
- &hw_lisa_map_regs->dmm_lisa_map_0);
-
- if (omap_revision() >= OMAP4460_ES1_0) {
- hw_lisa_map_regs =
- (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
-
- writel(lisa_map_regs->dmm_lisa_map_3,
- &hw_lisa_map_regs->dmm_lisa_map_3);
- writel(lisa_map_regs->dmm_lisa_map_2,
- &hw_lisa_map_regs->dmm_lisa_map_2);
- writel(lisa_map_regs->dmm_lisa_map_1,
- &hw_lisa_map_regs->dmm_lisa_map_1);
- writel(lisa_map_regs->dmm_lisa_map_0,
- &hw_lisa_map_regs->dmm_lisa_map_0);
- }
-}
-
-/*
- * SDRAM initialization:
- * SDRAM initialization has two parts:
- * 1. Configuring the SDRAM device
- * 2. Update the AC timings related parameters in the EMIF module
- * (1) should be done only once and should not be done while we are
- * running from SDRAM.
- * (2) can and should be done more than once if OPP changes.
- * Particularly, this may be needed when we boot without SPL and
- * and using Configuration Header(CH). ROM code supports only at 50% OPP
- * at boot (low power boot). So u-boot has to switch to OPP100 and update
- * the frequency. So,
- * Doing (1) and (2) makes sense - first time initialization
- * Doing (2) and not (1) makes sense - OPP change (when using CH)
- * Doing (1) and not (2) doen't make sense
- * See do_sdram_init() for the details
- */
-void sdram_init(void)
-{
- u32 in_sdram, size_prog, size_detect;
-
- debug(">>sdram_init()\n");
-
- if (omap4_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
- return;
-
- in_sdram = running_from_sdram();
- debug("in_sdram = %d\n", in_sdram);
-
- if (!in_sdram) {
- sdram_init_pads();
- bypass_dpll(&prcm->cm_clkmode_dpll_core);
- }
-
- do_sdram_init(OMAP44XX_EMIF1);
- do_sdram_init(OMAP44XX_EMIF2);
-
- if (!in_sdram) {
- dmm_init(OMAP44XX_DMM_LISA_MAP_BASE);
- emif_post_init_config(OMAP44XX_EMIF1);
- emif_post_init_config(OMAP44XX_EMIF2);
-
- }
-
- /* for the shadow registers to take effect */
- freq_update_core();
-
- /* Do some testing after the init */
- if (!in_sdram) {
- size_prog = omap4_sdram_size();
- size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
- size_prog);
- /* Compare with the size programmed */
- if (size_detect != size_prog) {
- printf("SDRAM: identified size not same as expected"
- " size identified: %x expected: %x\n",
- size_detect,
- size_prog);
- } else
- debug("get_ram_size() successful");
- }
-
- debug("<<sdram_init()\n");
-}