Merge remote-tracking branch 'mpc83xx/next'

[u-boot] / arch / arm / cpu / armv7 / start.S

diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index f26308df16c972ea6b9b9e9da0d72ceab3f91916..dcc1f831bc814a2b47fd034815091561859b7000 100644 (file)
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -155,12 +155,7 @@ reset:
        bl      cpu_init_crit
 #endif
 
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-       ldr     sp, =(CONFIG_SYS_INIT_SP_ADDR)
-       bic     sp, sp, #7 /* 8-byte alignment for ABI compliance */
-       ldr     r0,=0x00000000
-       bl      board_init_f
+       bl      _main
 
 /*------------------------------------------------------------------------------*/
 
@@ -177,14 +172,10 @@ ENTRY(relocate_code)
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
 
-       /* Set up the stack                                                 */
-stack_setup:
-       mov     sp, r4
-
        adr     r0, _start
        cmp     r0, r6
        moveq   r9, #0          /* no relocation. relocation offset(r9) = 0 */
-       beq     clear_bss               /* skip relocation */
+       beq     relocate_done           /* skip relocation */
        mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r3, _image_copy_end_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -233,34 +224,22 @@ fixnext:
        add     r2, r2, #8              /* each rel.dyn entry is 8 bytes */
        cmp     r2, r3
        blo     fixloop
-       b       clear_bss
+
+relocate_done:
+
+       bx      lr
+
 _rel_dyn_start_ofs:
        .word __rel_dyn_start - _start
 _rel_dyn_end_ofs:
        .word __rel_dyn_end - _start
 _dynsym_start_ofs:
        .word __dynsym_start - _start
+ENDPROC(relocate_code)
 
-clear_bss:
-       ldr     r0, _bss_start_ofs
-       ldr     r1, _bss_end_ofs
-       mov     r4, r6                  /* reloc addr */
-       add     r0, r0, r4
-       add     r1, r1, r4
-       mov     r2, #0x00000000         /* clear                            */
-
-clbss_l:cmp    r0, r1                  /* clear loop... */
-       bhs     clbss_e                 /* if reached end of bss, exit */
-       str     r2, [r0]
-       add     r0, r0, #4
-       b       clbss_l
-clbss_e:
+#endif
 
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-jump_2_ram:
+ENTRY(c_runtime_cpu_setup)
 /*
  * If I-cache is enabled invalidate it
  */
@@ -279,20 +258,9 @@ jump_2_ram:
        mcr     p15, 0, r0, c12, c0, 0  @Set VBAR
 #endif /* !Tegra20 */
 
-       ldr     r0, _board_init_r_ofs
-       adr     r1, _start
-       add     lr, r0, r1
-       add     lr, lr, r9
-       /* setup parameters for board_init_r */
-       mov     r0, r5          /* gd_t */
-       mov     r1, r6          /* dest_addr */
-       /* jump to it ... */
-       mov     pc, lr
-
-_board_init_r_ofs:
-       .word board_init_r - _start
-ENDPROC(relocate_code)
-#endif
+       bx      lr
+
+ENDPROC(c_runtime_cpu_setup)
 
 /*************************************************************************
  *
@@ -360,10 +328,7 @@ ENTRY(cpu_init_crit)
         * basic memory. Go here to bump up clock rate and handle
         * wake up conditions.
         */
-       mov     ip, lr                  @ persevere link reg across call
-       bl      lowlevel_init           @ go setup pll,mux,memory
-       mov     lr, ip                  @ restore link
-       mov     pc, lr                  @ back to my caller
+       b       lowlevel_init           @ go setup pll,mux,memory
 ENDPROC(cpu_init_crit)
 #endif