u32 s_first_boot = 1;
+void init_pllx(void)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ /* If PLLX is already enabled, just return */
+ reg = readl(&clkrst->crc_pllx_base);
+ if (reg & PLL_ENABLE)
+ return;
+
+ /* Set PLLX_MISC */
+ reg = CPCON; /* CPCON[11:8] = 0001 */
+ writel(reg, &clkrst->crc_pllx_misc);
+
+ /* Use 12MHz clock here */
+ reg = (PLL_BYPASS | PLL_DIVM);
+ reg |= (1000 << 8); /* DIVN = 0x3E8 */
+ writel(reg, &clkrst->crc_pllx_base);
+
+ reg |= PLL_ENABLE;
+ writel(reg, &clkrst->crc_pllx_base);
+
+ reg &= ~PLL_BYPASS;
+ writel(reg, &clkrst->crc_pllx_base);
+}
+
static void enable_cpu_clock(int enable)
{
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
*/
if (enable) {
+ /* Initialize PLLX */
+ init_pllx();
+
/* Wait until all clocks are stable */
udelay(PLL_STABILIZATION_DELAY);