/*
* Copyright (c) 2013 Xilinx Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <malloc.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk.h>
#define SLCR_LOCK_MAGIC 0x767B
#define SLCR_UNLOCK_MAGIC 0xDF0D
+#define SLCR_USB_L1_SEL 0x04
+
+#define SLCR_IDCODE_MASK 0x1F000
+#define SLCR_IDCODE_SHIFT 12
+
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of periph
+ */
+struct zynq_slcr_mio_get_status {
+ const char *peri_name;
+ const int *get_pins;
+ int num_pins;
+ u32 mask;
+ u32 check_val;
+};
+
+static const int usb0_pins[] = {
+ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
+};
+
+static const int usb1_pins[] = {
+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+ {
+ "usb0",
+ usb0_pins,
+ ARRAY_SIZE(usb0_pins),
+ SLCR_USB_L1_SEL,
+ SLCR_USB_L1_SEL,
+ },
+ {
+ "usb1",
+ usb1_pins,
+ ARRAY_SIZE(usb1_pins),
+ SLCR_USB_L1_SEL,
+ SLCR_USB_L1_SEL,
+ },
+};
+
static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
void zynq_slcr_lock(void)
{
- if (!slcr_lock)
+ if (!slcr_lock) {
writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+ slcr_lock = 1;
+ }
}
void zynq_slcr_unlock(void)
{
- if (slcr_lock)
+ if (slcr_lock) {
writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+ slcr_lock = 0;
+ }
}
/* Reset the entire system */
}
/* Setup clk for network */
-void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
+void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
{
+ int ret;
+
zynq_slcr_unlock();
if (gem_id > 1) {
goto out;
}
+ ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
+ if (ret)
+ goto out;
+
if (gem_id) {
- /* Set divisors for appropriate frequency in GEM_CLK_CTRL */
- writel(clk, &slcr_base->gem1_clk_ctrl);
/* Configure GEM_RCLK_CTRL */
- writel(rclk, &slcr_base->gem1_rclk_ctrl);
+ writel(1, &slcr_base->gem1_rclk_ctrl);
} else {
- /* Set divisors for appropriate frequency in GEM_CLK_CTRL */
- writel(clk, &slcr_base->gem0_clk_ctrl);
/* Configure GEM_RCLK_CTRL */
- writel(rclk, &slcr_base->gem0_rclk_ctrl);
+ writel(1, &slcr_base->gem0_rclk_ctrl);
}
-
+ udelay(100000);
out:
zynq_slcr_lock();
}
+
+void zynq_slcr_devcfg_disable(void)
+{
+ zynq_slcr_unlock();
+
+ /* Disable AXI interface by asserting FPGA resets */
+ writel(0xF, &slcr_base->fpga_rst_ctrl);
+
+ /* Set Level Shifters DT618760 */
+ writel(0xA, &slcr_base->lvl_shftr_en);
+
+ zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_enable(void)
+{
+ zynq_slcr_unlock();
+
+ /* Set Level Shifters DT618760 */
+ writel(0xF, &slcr_base->lvl_shftr_en);
+
+ /* Enable AXI interface by de-asserting FPGA resets */
+ writel(0x0, &slcr_base->fpga_rst_ctrl);
+
+ zynq_slcr_lock();
+}
+
+u32 zynq_slcr_get_boot_mode(void)
+{
+ /* Get the bootmode register value */
+ return readl(&slcr_base->boot_mode);
+}
+
+u32 zynq_slcr_get_idcode(void)
+{
+ return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
+ SLCR_IDCODE_SHIFT;
+}
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+ const struct zynq_slcr_mio_get_status *mio_ptr;
+ int val, i, j;
+ int mio = 0;
+
+ for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+ if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+ mio_ptr = &mio_periphs[i];
+ for (j = 0; j < mio_ptr->num_pins; j++) {
+ val = readl(&slcr_base->mio_pin
+ [mio_ptr->get_pins[j]]);
+ if ((val & mio_ptr->mask) == mio_ptr->check_val)
+ mio++;
+ }
+ break;
+ }
+ }
+
+ return mio;
+}