select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
select SYS_FSL_ERRATUM_A010315
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
config ARCH_LS1043A
bool
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
config ARCH_LS1046A
bool
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A008336
select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A008850
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
config ARCH_LS2080A
bool
select ARMV8_SET_SMPEN
+ select ARM_ERRATA_826974
+ select ARM_ERRATA_828024
+ select ARM_ERRATA_829520
+ select ARM_ERRATA_833471
select FSL_LSCH3
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_ERRATUM_A009803
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A009203
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
config FSL_LSCH2
bool
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
+config FSL_MC_ENET
+ bool "Management Complex network"
+ depends on ARCH_LS2080A
+ default y
+ select RESV_RAM
+ help
+ Enable Management Complex (MC) network
+
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
bool
default y if ARCH_LS1043A
+config HAS_FEATURE_ENHANCED_MSI
+ bool
+ default y if ARCH_LS1043A
menu "Layerscape PPA"
config FSL_LS_PPA
bool "FSL Layerscape PPA firmware support"
depends on !ARMV8_PSCI
- depends on ARCH_LS1043A || ARCH_LS1046A
- select FSL_PPA_ARMV8_PSCI
+ select ARMV8_SEC_FIRMWARE_SUPPORT
+ select SEC_FIRMWARE_ARMV8_PSCI
+ select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
help
The FSL Primary Protected Application (PPA) is a software component
which is loaded during boot stage, and then remains resident in RAM
and runs in the TrustZone after boot.
Say y to enable it.
+choice
+ prompt "FSL Layerscape PPA firmware loading-media select"
+ depends on FSL_LS_PPA
+ default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
+ default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
+ default SYS_LS_PPA_FW_IN_XIP
+
+config SYS_LS_PPA_FW_IN_XIP
+ bool "XIP"
+ help
+ Say Y here if the PPA firmware locate at XIP flash, such
+ as NOR or QSPI flash.
-config FSL_PPA_ARMV8_PSCI
- bool "PSCI implementation in PPA firmware"
+config SYS_LS_PPA_FW_IN_MMC
+ bool "eMMC or SD Card"
+ help
+ Say Y here if the PPA firmware locate at eMMC/SD card.
+
+config SYS_LS_PPA_FW_IN_NAND
+ bool "NAND"
+ help
+ Say Y here if the PPA firmware locate at NAND flash.
+
+endchoice
+
+config SYS_LS_PPA_FW_ADDR
+ hex "Address of PPA firmware loading from"
depends on FSL_LS_PPA
+ default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+ default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+ default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
+ default 0x500000 if SYS_LS_PPA_FW_IN_MMC
+ default 0x500000 if SYS_LS_PPA_FW_IN_NAND
+
help
- This config enables the ARMv8 PSCI implementation in PPA firmware.
- This is a private PSCI implementation and different from those
- implemented under the common ARMv8 PSCI framework.
+ If the PPA firmware locate at XIP flash, such as NOR or
+ QSPI flash, this address is a directly memory-mapped.
+ If it is in a serial accessed flash, such as NAND and SD
+ card, it is a byte offset.
+
+config SYS_LS_PPA_ESBC_ADDR
+ hex "hdr address of PPA firmware loading from"
+ depends on FSL_LS_PPA && CHAIN_OF_TRUST
+ default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+ default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+ default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+ default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
+ help
+ If the PPA header firmware locate at XIP flash, such as NOR or
+ QSPI flash, this address is a directly memory-mapped.
+ If it is in a serial accessed flash, such as NAND and SD
+ card, it is a byte offset.
+
endmenu
config SYS_FSL_ERRATUM_A010315
clock, in another word SDHC_clk = Platform_clk / this_divider.
endmenu
+config RESV_RAM
+ bool
+ help
+ Reserve memory from the top, tracked by gd->arch.resv_ram. This
+ reserved RAM can be used by special driver that resides in memory
+ after U-Boot exits. It's up to implementation to allocate and allow
+ access to this reserved memory. For example, the reserved RAM can
+ be at the high end of physical memory. The reserve RAM may be
+ excluded from memory bank(s) passed to OS, or marked as reserved.
+
config SYS_FSL_ERRATUM_A008336
bool
config SYS_FSL_ERRATUM_A008850
bool
+config SYS_FSL_ERRATUM_A009203
+ bool
+
config SYS_FSL_ERRATUM_A009635
bool
config SYS_FSL_ERRATUM_A009929
bool
+
+config SYS_MC_RSV_MEM_ALIGN
+ hex "Management Complex reserved memory alignment"
+ depends on RESV_RAM
+ default 0x20000000
+ help
+ Reserved memory needs to be aligned for MC to use. Default value
+ is 512MB.
projects / u-boot / blobdiff