select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
select SYS_FSL_ERRATUM_A010315
+ select SYS_FSL_ERRATUM_A009798
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009660
select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009929
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ imply SCSI
+ imply SCSI_AHCI
+ imply CMD_PCI
config ARCH_LS1046A
bool
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A008336
select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ imply SCSI
+ imply SCSI_AHCI
+
+config ARCH_LS1088A
+ bool
+ select ARMV8_SET_SMPEN
+ select FSL_LSCH3
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_EC1
+ select SYS_FSL_EC2
+ select SYS_FSL_ERRATUM_A009803
+ select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_HAS_CCI400
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_HAS_RGMII
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select SYS_FSL_SRDS_1
+ select SYS_FSL_SRDS_2
+ select FSL_TZASC_1
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ imply SCSI
config ARCH_LS2080A
bool
select ARMV8_SET_SMPEN
+ select ARM_ERRATA_826974
+ select ARM_ERRATA_828024
+ select ARM_ERRATA_829520
+ select ARM_ERRATA_833471
select FSL_LSCH3
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_HAS_CCN504
select SYS_FSL_HAS_DP_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_DDR4
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select SYS_FSL_SRDS_2
+ select FSL_TZASC_1
+ select FSL_TZASC_2
select SYS_FSL_ERRATUM_A008336
select SYS_FSL_ERRATUM_A008511
select SYS_FSL_ERRATUM_A008514
select SYS_FSL_ERRATUM_A008585
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009635
select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A009203
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
config FSL_LSCH2
bool
+ select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_BE
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
+config FSL_MC_ENET
+ bool "Management Complex network"
+ depends on ARCH_LS2080A || ARCH_LS1088A
+ default y
+ select RESV_RAM
+ help
+ Enable Management Complex (MC) network
+
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
default "fsl,ls1043a-pcie" if ARCH_LS1043A
default "fsl,ls1046a-pcie" if ARCH_LS1046A
default "fsl,ls2080a-pcie" if ARCH_LS2080A
+ default "fsl,ls1088a-pcie" if ARCH_LS1088A
help
This compatible is used to find pci controller node in Kernel DT
to complete fixup.
which is loaded during boot stage, and then remains resident in RAM
and runs in the TrustZone after boot.
Say y to enable it.
+
+config SPL_FSL_LS_PPA
+ bool "FSL Layerscape PPA firmware support for SPL build"
+ depends on !ARMV8_PSCI
+ select SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+ select SEC_FIRMWARE_ARMV8_PSCI
+ select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
+ help
+ The FSL Primary Protected Application (PPA) is a software component
+ which is loaded during boot stage, and then remains resident in RAM
+ and runs in the TrustZone after boot. This is to load PPA during SPL
+ stage instead of the RAM version of U-Boot. Once PPA is initialized,
+ the rest of U-Boot (including RAM version) runs at EL2.
choice
prompt "FSL Layerscape PPA firmware loading-media select"
depends on FSL_LS_PPA
+ default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
+ default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
default SYS_LS_PPA_FW_IN_XIP
config SYS_LS_PPA_FW_IN_XIP
Say Y here if the PPA firmware locate at XIP flash, such
as NOR or QSPI flash.
+config SYS_LS_PPA_FW_IN_MMC
+ bool "eMMC or SD Card"
+ help
+ Say Y here if the PPA firmware locate at eMMC/SD card.
+
+config SYS_LS_PPA_FW_IN_NAND
+ bool "NAND"
+ help
+ Say Y here if the PPA firmware locate at NAND flash.
+
endchoice
config SYS_LS_PPA_FW_ADDR
hex "Address of PPA firmware loading from"
depends on FSL_LS_PPA
- default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
- default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
+ default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
+ default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+ default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+ default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
+ default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+ default 0x400000 if SYS_LS_PPA_FW_IN_MMC
+ default 0x400000 if SYS_LS_PPA_FW_IN_NAND
+
help
If the PPA firmware locate at XIP flash, such as NOR or
QSPI flash, this address is a directly memory-mapped.
If it is in a serial accessed flash, such as NAND and SD
card, it is a byte offset.
+
+config SYS_LS_PPA_ESBC_ADDR
+ hex "hdr address of PPA firmware loading from"
+ depends on FSL_LS_PPA && CHAIN_OF_TRUST
+ default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+ default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+ default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+ default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
+ default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+ default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
+ default 0x680000 if SYS_LS_PPA_FW_IN_MMC
+ default 0x680000 if SYS_LS_PPA_FW_IN_NAND
+ help
+ If the PPA header firmware locate at XIP flash, such as NOR or
+ QSPI flash, this address is a directly memory-mapped.
+ If it is in a serial accessed flash, such as NAND and SD
+ card, it is a byte offset.
+
+config LS_PPA_ESBC_HDR_SIZE
+ hex "Length of PPA ESBC header"
+ depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
+ default 0x2000
+ help
+ Length (in bytes) of PPA ESBC header to be copied from MMC/SD or
+ NAND to memory to validate PPA image.
+
endmenu
+config SYS_FSL_ERRATUM_A008997
+ bool "Workaround for USB PHY erratum A008997"
+
+config SYS_FSL_ERRATUM_A009007
+ bool
+ help
+ Workaround for USB PHY erratum A009007
+
+config SYS_FSL_ERRATUM_A009008
+ bool "Workaround for USB PHY erratum A009008"
+
+config SYS_FSL_ERRATUM_A009798
+ bool "Workaround for USB PHY erratum A009798"
+
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
default 16 if ARCH_LS2080A
+ default 8 if ARCH_LS1088A
default 1
help
Set this number to the maximum number of possible CPUs in the SoC.
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config SYS_CCI400_OFFSET
+ hex "Offset for CCI400 base"
+ depends on SYS_FSL_HAS_CCI400
+ default 0x3090000 if ARCH_LS1088A
+ default 0x180000 if FSL_LSCH2
+ help
+ Offset for CCI400 base
+ CCI400 base addr = CCSRBAR + CCI400_OFFSET
+
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
- depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+ depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
- default 8 if ARCH_LS2080A
+ default 8 if ARCH_LS2080A || ARCH_LS1088A
+
+config SYS_FSL_HAS_CCI400
+ bool
+
+config SYS_FSL_HAS_CCN504
+ bool
config SYS_FSL_HAS_DP_DDR
bool
config SYS_HAS_SERDES
bool
+config FSL_TZASC_1
+ bool
+
+config FSL_TZASC_2
+ bool
+
endmenu
menu "Layerscape clock tree configuration"
int "Platform clock divider"
default 1 if ARCH_LS1043A
default 1 if ARCH_LS1046A
+ default 1 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive Platform clock from
default 2
help
This is the divider that is used to derive DSPI clock from Platform
- PLL, in another word DSPI_clk = Platform_PLL_freq / this_divider.
+ clock, in another word DSPI_clk = Platform_clk / this_divider.
config SYS_FSL_DUART_CLK_DIV
int "DUART clock divider"
clock, in another word SDHC_clk = Platform_clk / this_divider.
endmenu
+config RESV_RAM
+ bool
+ help
+ Reserve memory from the top, tracked by gd->arch.resv_ram. This
+ reserved RAM can be used by special driver that resides in memory
+ after U-Boot exits. It's up to implementation to allocate and allow
+ access to this reserved memory. For example, the reserved RAM can
+ be at the high end of physical memory. The reserve RAM may be
+ excluded from memory bank(s) passed to OS, or marked as reserved.
+
+config SYS_FSL_EC1
+ bool
+ help
+ Ethernet controller 1, this is connected to MAC3.
+ Provides DPAA2 capabilities
+
+config SYS_FSL_EC2
+ bool
+ help
+ Ethernet controller 2, this is connected to MAC4.
+ Provides DPAA2 capabilities
+
config SYS_FSL_ERRATUM_A008336
bool
config SYS_FSL_ERRATUM_A008850
bool
+config SYS_FSL_ERRATUM_A009203
+ bool
+
config SYS_FSL_ERRATUM_A009635
bool
config SYS_FSL_ERRATUM_A009929
bool
+
+
+config SYS_FSL_HAS_RGMII
+ bool
+ depends on SYS_FSL_EC1 || SYS_FSL_EC2
+
+
+config SYS_MC_RSV_MEM_ALIGN
+ hex "Management Complex reserved memory alignment"
+ depends on RESV_RAM
+ default 0x20000000 if ARCH_LS2080A
+ default 0x70000000 if ARCH_LS1088A
+ help
+ Reserved memory needs to be aligned for MC to use. Default value
+ is 512MB.
+
+config SPL_LDSCRIPT
+ default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+
+config HAS_FSL_XHCI_USB
+ bool
+ default y if ARCH_LS1043A || ARCH_LS1046A
+ help
+ For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
+ pins, select it when the pins are assigned to USB.
projects / u-boot / blobdiff