config ARCH_LS1012A
bool
+ select ARMV8_SET_SMPEN
select FSL_LSCH2
select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
config ARCH_LS1043A
bool
+ select ARMV8_SET_SMPEN
select FSL_LSCH2
+ select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A009660
+ select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009929
+ select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A010539
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
config ARCH_LS1046A
bool
+ select ARMV8_SET_SMPEN
select FSL_LSCH2
+ select SYS_FSL_DDR
select SYS_FSL_DDR_BE
- select SYS_FSL_DDR4
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A009801
+ select SYS_FSL_ERRATUM_A009803
+ select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A010165
select SYS_FSL_ERRATUM_A010539
+ select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
config ARCH_LS2080A
bool
+ select ARMV8_SET_SMPEN
select FSL_LSCH3
- select SYS_FSL_DDR4
+ select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
select SYS_FSL_HAS_DP_DDR
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
select SYS_FSL_SRDS_2
+ select SYS_FSL_ERRATUM_A008336
+ select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A008514
+ select SYS_FSL_ERRATUM_A008585
+ select SYS_FSL_ERRATUM_A009635
+ select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009801
+ select SYS_FSL_ERRATUM_A009803
+ select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A010165
config FSL_LSCH2
bool
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_BE
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
-config SYS_FSL_MMDC
- bool
+config FSL_PCIE_COMPAT
+ string "PCIe compatible of Kernel DT"
+ depends on PCIE_LAYERSCAPE
+ default "fsl,ls1012a-pcie" if ARCH_LS1012A
+ default "fsl,ls1043a-pcie" if ARCH_LS1043A
+ default "fsl,ls1046a-pcie" if ARCH_LS1046A
+ default "fsl,ls2080a-pcie" if ARCH_LS2080A
+ help
+ This compatible is used to find pci controller node in Kernel DT
+ to complete fixup.
+
+menu "Layerscape PPA"
+config FSL_LS_PPA
+ bool "FSL Layerscape PPA firmware support"
+ depends on !ARMV8_PSCI
+ depends on ARCH_LS1043A || ARCH_LS1046A
+ select FSL_PPA_ARMV8_PSCI
+ help
+ The FSL Primary Protected Application (PPA) is a software component
+ which is loaded during boot stage, and then remains resident in RAM
+ and runs in the TrustZone after boot.
+ Say y to enable it.
+
+config FSL_PPA_ARMV8_PSCI
+ bool "PSCI implementation in PPA firmware"
+ depends on FSL_LS_PPA
+ help
+ This config enables the ARMv8 PSCI implementation in PPA firmware.
+ This is a private PSCI implementation and different from those
+ implemented under the common ARMv8 PSCI framework.
+endmenu
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
cores, count the reserved ports. This will allocate enough memory
in spin table to properly handle all cores.
-config NUM_DDR_CONTROLLERS
- int "Maximum DDR controllers"
- default 3 if ARCH_LS2080A
- default 1
-
config SECURE_BOOT
bool
help
config SYS_HAS_SERDES
bool
-config SYS_FSL_DDR
- bool "Freescale DDR driver"
- help
- Select Freescale General DDR driver, shared between most Freescale
- PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
- based Layerscape SoCs (such as ls2080a).
+endmenu
-config SYS_FSL_DDR_BE
+config SYS_FSL_ERRATUM_A008336
bool
- help
- Access DDR registers in big-endian.
-config SYS_FSL_DDR_LE
+config SYS_FSL_ERRATUM_A008514
bool
- help
- Access DDR registers in little-endian.
-
-config SYS_FSL_DDR_VER
- int
- default 50 if SYS_FSL_DDR_VER_50
-config SYS_FSL_DDR_VER_50
+config SYS_FSL_ERRATUM_A008585
bool
-config SYS_FSL_DDRC_ARM_GEN3
+config SYS_FSL_ERRATUM_A008850
bool
-config SYS_FSL_DDRC_GEN4
+config SYS_FSL_ERRATUM_A009635
bool
-config SYS_FSL_DDR3
- bool "Freescale DDR3 controller"
- depends on !SYS_FSL_DDR4
- select SYS_FSL_DDR
- select SYS_FSL_DDRC_ARM_GEN3
- help
- Enable Freescale DDR3 controller on ARM-based SoCs.
-
-config SYS_FSL_DDR4
- bool "Freescale DDR4 controller"
- select SYS_FSL_DDR
- select SYS_FSL_DDRC_GEN4
- help
- Enable Freescale DDR4 controller.
+config SYS_FSL_ERRATUM_A009660
+ bool
-endmenu
+config SYS_FSL_ERRATUM_A009929
+ bool