armv8: Remove dependency of SERDES for LSCH2 and LSCH3

[u-boot] / arch / arm / cpu / armv8 / fsl-layerscape / Kconfig

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 85b7c70937e84f6694eb1e46c354e3007cc9ec37..7b59dc9a7c8b4e94bca89678b94dbea160258a2b 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -1,17 +1,28 @@
 config ARCH_LS1012A
        bool
        select ARMV8_SET_SMPEN
+       select ARM_ERRATA_855873
        select FSL_LSCH2
+       select SYS_FSL_SRDS_1
+       select SYS_HAS_SERDES
        select SYS_FSL_DDR_BE
        select SYS_FSL_MMDC
        select SYS_FSL_ERRATUM_A010315
+       select SYS_FSL_ERRATUM_A009798
+       select SYS_FSL_ERRATUM_A008997
+       select SYS_FSL_ERRATUM_A009007
+       select SYS_FSL_ERRATUM_A009008
        select ARCH_EARLY_INIT_R
        select BOARD_EARLY_INIT_F
+       imply PANIC_HANG
 
 config ARCH_LS1043A
        bool
        select ARMV8_SET_SMPEN
+       select ARM_ERRATA_855873
        select FSL_LSCH2
+       select SYS_FSL_SRDS_1
+       select SYS_HAS_SERDES
        select SYS_FSL_DDR
        select SYS_FSL_DDR_BE
        select SYS_FSL_DDR_VER_50
@@ -31,12 +42,15 @@ config ARCH_LS1043A
        select ARCH_EARLY_INIT_R
        select BOARD_EARLY_INIT_F
        imply SCSI
+       imply SCSI_AHCI
        imply CMD_PCI
 
 config ARCH_LS1046A
        bool
        select ARMV8_SET_SMPEN
        select FSL_LSCH2
+       select SYS_FSL_SRDS_1
+       select SYS_HAS_SERDES
        select SYS_FSL_DDR
        select SYS_FSL_DDR_BE
        select SYS_FSL_DDR_VER_50
@@ -57,11 +71,15 @@ config ARCH_LS1046A
        select ARCH_EARLY_INIT_R
        select BOARD_EARLY_INIT_F
        imply SCSI
+       imply SCSI_AHCI
 
 config ARCH_LS1088A
        bool
        select ARMV8_SET_SMPEN
+       select ARM_ERRATA_855873
        select FSL_LSCH3
+       select SYS_FSL_SRDS_1
+       select SYS_HAS_SERDES
        select SYS_FSL_DDR
        select SYS_FSL_DDR_LE
        select SYS_FSL_DDR_VER_50
@@ -84,6 +102,8 @@ config ARCH_LS1088A
        select FSL_TZASC_1
        select ARCH_EARLY_INIT_R
        select BOARD_EARLY_INIT_F
+       imply SCSI
+       imply PANIC_HANG
 
 config ARCH_LS2080A
        bool
@@ -93,6 +113,8 @@ config ARCH_LS2080A
        select ARM_ERRATA_829520
        select ARM_ERRATA_833471
        select FSL_LSCH3
+       select SYS_FSL_SRDS_1
+       select SYS_HAS_SERDES
        select SYS_FSL_DDR
        select SYS_FSL_DDR_LE
        select SYS_FSL_DDR_VER_50
@@ -122,6 +144,7 @@ config ARCH_LS2080A
        select SYS_FSL_ERRATUM_A009203
        select ARCH_EARLY_INIT_R
        select BOARD_EARLY_INIT_F
+       imply PANIC_HANG
 
 config FSL_LSCH2
        bool
@@ -129,13 +152,9 @@ config FSL_LSCH2
        select SYS_FSL_HAS_SEC
        select SYS_FSL_SEC_COMPAT_5
        select SYS_FSL_SEC_BE
-       select SYS_FSL_SRDS_1
-       select SYS_HAS_SERDES
 
 config FSL_LSCH3
        bool
-       select SYS_FSL_SRDS_1
-       select SYS_HAS_SERDES
 
 config FSL_MC_ENET
        bool "Management Complex network"
@@ -243,6 +262,7 @@ config SYS_LS_PPA_ESBC_ADDR
        default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
        default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
        default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+       default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
        default 0x680000 if SYS_LS_PPA_FW_IN_MMC
        default 0x680000 if SYS_LS_PPA_FW_IN_NAND
        help
@@ -482,11 +502,17 @@ config SYS_FSL_HAS_RGMII
 config SYS_MC_RSV_MEM_ALIGN
        hex "Management Complex reserved memory alignment"
        depends on RESV_RAM
-       default 0x20000000 if ARCH_LS2080A
-       default 0x70000000 if ARCH_LS1088A
+       default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A
        help
          Reserved memory needs to be aligned for MC to use. Default value
          is 512MB.
 
 config SPL_LDSCRIPT
        default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+
+config HAS_FSL_XHCI_USB
+       bool
+       default y if ARCH_LS1043A || ARCH_LS1046A
+       help
+         For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
+         pins, select it when the pins are assigned to USB.