config ARCH_LS1012A
bool
select ARMV8_SET_SMPEN
+ select ARM_ERRATA_855873
select FSL_LSCH2
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
select SYS_FSL_ERRATUM_A010315
+ select SYS_FSL_ERRATUM_A009798
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ imply PANIC_HANG
config ARCH_LS1043A
bool
select ARMV8_SET_SMPEN
+ select ARM_ERRATA_855873
select FSL_LSCH2
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009660
select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009929
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
imply SCSI
+ imply SCSI_AHCI
+ imply CMD_PCI
config ARCH_LS1046A
bool
select ARMV8_SET_SMPEN
select FSL_LSCH2
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008336
select SYS_FSL_ERRATUM_A008511
select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
imply SCSI
+ imply SCSI_AHCI
+
+config ARCH_LS1088A
+ bool
+ select ARMV8_SET_SMPEN
+ select ARM_ERRATA_855873
+ select FSL_LSCH3
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_EC1
+ select SYS_FSL_EC2
+ select SYS_FSL_ERRATUM_A009803
+ select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_HAS_CCI400
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_HAS_RGMII
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select SYS_FSL_SRDS_1
+ select SYS_FSL_SRDS_2
+ select FSL_TZASC_1
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ imply SCSI
+ imply PANIC_HANG
config ARCH_LS2080A
bool
select ARM_ERRATA_829520
select ARM_ERRATA_833471
select FSL_LSCH3
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_HAS_CCN504
select SYS_FSL_HAS_DP_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_DDR4
select SYS_FSL_ERRATUM_A008511
select SYS_FSL_ERRATUM_A008514
select SYS_FSL_ERRATUM_A008585
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009635
select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A009203
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ imply DISTRO_DEFAULTS
+ imply PANIC_HANG
config FSL_LSCH2
bool
+ select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_BE
- select SYS_FSL_SRDS_1
- select SYS_HAS_SERDES
config FSL_LSCH3
bool
- select SYS_FSL_SRDS_1
- select SYS_HAS_SERDES
config FSL_MC_ENET
bool "Management Complex network"
- depends on ARCH_LS2080A
+ depends on ARCH_LS2080A || ARCH_LS1088A
default y
select RESV_RAM
help
default "fsl,ls1043a-pcie" if ARCH_LS1043A
default "fsl,ls1046a-pcie" if ARCH_LS1046A
default "fsl,ls2080a-pcie" if ARCH_LS2080A
+ default "fsl,ls1088a-pcie" if ARCH_LS1088A
help
This compatible is used to find pci controller node in Kernel DT
to complete fixup.
default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+ default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
default 0x400000 if SYS_LS_PPA_FW_IN_MMC
default 0x400000 if SYS_LS_PPA_FW_IN_NAND
config SYS_LS_PPA_ESBC_ADDR
hex "hdr address of PPA firmware loading from"
depends on FSL_LS_PPA && CHAIN_OF_TRUST
- default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
- default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
- default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
- default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
- default 0x700000 if SYS_LS_PPA_FW_IN_MMC
- default 0x700000 if SYS_LS_PPA_FW_IN_NAND
+ default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+ default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+ default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+ default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
+ default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+ default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
+ default 0x680000 if SYS_LS_PPA_FW_IN_MMC
+ default 0x680000 if SYS_LS_PPA_FW_IN_NAND
help
If the PPA header firmware locate at XIP flash, such as NOR or
QSPI flash, this address is a directly memory-mapped.
endmenu
+config SYS_FSL_ERRATUM_A008997
+ bool "Workaround for USB PHY erratum A008997"
+
+config SYS_FSL_ERRATUM_A009007
+ bool
+ help
+ Workaround for USB PHY erratum A009007
+
+config SYS_FSL_ERRATUM_A009008
+ bool "Workaround for USB PHY erratum A009008"
+
+config SYS_FSL_ERRATUM_A009798
+ bool "Workaround for USB PHY erratum A009798"
+
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
default 16 if ARCH_LS2080A
+ default 8 if ARCH_LS1088A
default 1
help
Set this number to the maximum number of possible CPUs in the SoC.
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config SYS_CCI400_OFFSET
+ hex "Offset for CCI400 base"
+ depends on SYS_FSL_HAS_CCI400
+ default 0x3090000 if ARCH_LS1088A
+ default 0x180000 if FSL_LSCH2
+ help
+ Offset for CCI400 base
+ CCI400 base addr = CCSRBAR + CCI400_OFFSET
+
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
- depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+ depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
- default 8 if ARCH_LS2080A
+ default 8 if ARCH_LS2080A || ARCH_LS1088A
+
+config SYS_FSL_HAS_CCI400
+ bool
+
+config SYS_FSL_HAS_CCN504
+ bool
config SYS_FSL_HAS_DP_DDR
bool
int "Platform clock divider"
default 1 if ARCH_LS1043A
default 1 if ARCH_LS1046A
+ default 1 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive Platform clock from
be at the high end of physical memory. The reserve RAM may be
excluded from memory bank(s) passed to OS, or marked as reserved.
+config SYS_FSL_EC1
+ bool
+ help
+ Ethernet controller 1, this is connected to MAC3.
+ Provides DPAA2 capabilities
+
+config SYS_FSL_EC2
+ bool
+ help
+ Ethernet controller 2, this is connected to MAC4.
+ Provides DPAA2 capabilities
+
config SYS_FSL_ERRATUM_A008336
bool
config SYS_FSL_ERRATUM_A009929
bool
+
+config SYS_FSL_HAS_RGMII
+ bool
+ depends on SYS_FSL_EC1 || SYS_FSL_EC2
+
+
config SYS_MC_RSV_MEM_ALIGN
hex "Management Complex reserved memory alignment"
depends on RESV_RAM
- default 0x20000000
+ default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A
help
Reserved memory needs to be aligned for MC to use. Default value
is 512MB.
+
+config SPL_LDSCRIPT
+ default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+
+config HAS_FSL_XHCI_USB
+ bool
+ default y if ARCH_LS1043A || ARCH_LS1046A
+ help
+ For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
+ pins, select it when the pins are assigned to USB.
projects / u-boot / blobdiff