config ARCH_LS1012A
bool
select FSL_LSCH2
+ select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
select SYS_FSL_ERRATUM_A010315
config ARCH_LS1043A
bool
select FSL_LSCH2
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_BE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A009660
+ select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009929
+ select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A010539
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
config ARCH_LS1046A
bool
select FSL_LSCH2
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_BE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A009801
+ select SYS_FSL_ERRATUM_A009803
+ select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A010165
select SYS_FSL_ERRATUM_A010539
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_SRDS_2
config ARCH_LS2080A
bool
select FSL_LSCH3
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_HAS_DP_DDR
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select SYS_FSL_SRDS_2
+ select SYS_FSL_ERRATUM_A008336
+ select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A008514
+ select SYS_FSL_ERRATUM_A008585
+ select SYS_FSL_ERRATUM_A009635
+ select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009801
+ select SYS_FSL_ERRATUM_A009803
+ select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A010165
config FSL_LSCH2
bool
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_BE
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
config FSL_LSCH3
bool
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
-config SYS_FSL_MMDC
- bool
+menu "Layerscape PPA"
+config FSL_LS_PPA
+ bool "FSL Layerscape PPA firmware support"
+ depends on !ARMV8_PSCI
+ depends on ARCH_LS1043A || ARCH_LS1046A
+ select FSL_PPA_ARMV8_PSCI
+ help
+ The FSL Primary Protected Application (PPA) is a software component
+ which is loaded during boot stage, and then remains resident in RAM
+ and runs in the TrustZone after boot.
+ Say y to enable it.
+
+config FSL_PPA_ARMV8_PSCI
+ bool "PSCI implementation in PPA firmware"
+ depends on FSL_LS_PPA
+ help
+ This config enables the ARMv8 PSCI implementation in PPA firmware.
+ This is a private PSCI implementation and different from those
+ implemented under the common ARMv8 PSCI framework.
+endmenu
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
cores, count the reserved ports. This will allocate enough memory
in spin table to properly handle all cores.
-config NUM_DDR_CONTROLLERS
- int "Maximum DDR controllers"
- default 3 if ARCH_LS2080A
- default 1
+config SECURE_BOOT
+ bool
+ help
+ Enable Freescale Secure Boot feature
+
+config QSPI_AHB_INIT
+ bool "Init the QSPI AHB bus"
+ help
+ The default setting for QSPI AHB bus just support 3bytes addressing.
+ But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
+ bus for those flashes to support the full QSPI flash size.
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
config SYS_FSL_HAS_DP_DDR
bool
+config SYS_FSL_SRDS_1
+ bool
+
+config SYS_FSL_SRDS_2
+ bool
+
+config SYS_HAS_SERDES
+ bool
+
endmenu
+
+config SYS_FSL_ERRATUM_A008336
+ bool
+
+config SYS_FSL_ERRATUM_A008514
+ bool
+
+config SYS_FSL_ERRATUM_A008585
+ bool
+
+config SYS_FSL_ERRATUM_A008850
+ bool
+
+config SYS_FSL_ERRATUM_A009635
+ bool
+
+config SYS_FSL_ERRATUM_A009660
+ bool
+
+config SYS_FSL_ERRATUM_A009929
+ bool