#include <common.h>
#include <asm/io.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/system.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
+#include <efi_loader.h>
#include <fm_eth.h>
-#include <fsl_debug_server.h>
#include <fsl-mc/fsl_mc.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
+#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
+#include <asm/armv8/sec_firmware.h>
+#endif
+#ifdef CONFIG_SYS_FSL_DDR
+#include <fsl_ddr.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
-static struct mm_region layerscape_mem_map[] = {
- {
- /* List terminator */
- 0,
- }
-};
-struct mm_region *mem_map = layerscape_mem_map;
+struct mm_region *mem_map = early_map;
void cpu_name(char *name)
{
if (IS_E_PROCESSOR(svr))
strcat(name, "E");
+
+ sprintf(name + strlen(name), " Rev%d.%d",
+ SVR_MAJ(svr), SVR_MIN(svr));
break;
}
}
#ifndef CONFIG_SYS_DCACHE_OFF
-static void set_pgtable_section(u64 *page_table, u64 index, u64 section,
- u64 memory_type, u64 attribute)
-{
- u64 value;
-
- value = section | PTE_TYPE_BLOCK | PTE_BLOCK_AF;
- value |= PMD_ATTRINDX(memory_type);
- value |= attribute;
- page_table[index] = value;
-}
-
-static void set_pgtable_table(u64 *page_table, u64 index, u64 *table_addr)
-{
- u64 value;
-
- value = (u64)table_addr | PTE_TYPE_TABLE;
- page_table[index] = value;
-}
-
-/*
- * Set the block entries according to the information of the table.
- */
-static int set_block_entry(const struct sys_mmu_table *list,
- struct table_info *table)
-{
- u64 block_size = 0, block_shift = 0;
- u64 block_addr, index;
- int j;
-
- if (table->entry_size == BLOCK_SIZE_L1) {
- block_size = BLOCK_SIZE_L1;
- block_shift = SECTION_SHIFT_L1;
- } else if (table->entry_size == BLOCK_SIZE_L2) {
- block_size = BLOCK_SIZE_L2;
- block_shift = SECTION_SHIFT_L2;
- } else {
- return -EINVAL;
- }
-
- block_addr = list->phys_addr;
- index = (list->virt_addr - table->table_base) >> block_shift;
-
- for (j = 0; j < (list->size >> block_shift); j++) {
- set_pgtable_section(table->ptr,
- index,
- block_addr,
- list->memory_type,
- list->attribute);
- block_addr += block_size;
- index++;
- }
-
- return 0;
-}
-
-/*
- * Find the corresponding table entry for the list.
- */
-static int find_table(const struct sys_mmu_table *list,
- struct table_info *table, u64 *level0_table)
-{
- u64 index = 0, level = 0;
- u64 *level_table = level0_table;
- u64 temp_base = 0, block_size = 0, block_shift = 0;
-
- while (level < 3) {
- if (level == 0) {
- block_size = BLOCK_SIZE_L0;
- block_shift = SECTION_SHIFT_L0;
- } else if (level == 1) {
- block_size = BLOCK_SIZE_L1;
- block_shift = SECTION_SHIFT_L1;
- } else if (level == 2) {
- block_size = BLOCK_SIZE_L2;
- block_shift = SECTION_SHIFT_L2;
- }
-
- index = 0;
- while (list->virt_addr >= temp_base) {
- index++;
- temp_base += block_size;
- }
-
- temp_base -= block_size;
-
- if ((level_table[index - 1] & PTE_TYPE_MASK) ==
- PTE_TYPE_TABLE) {
- level_table = (u64 *)(level_table[index - 1] &
- ~PTE_TYPE_MASK);
- level++;
- continue;
- } else {
- if (level == 0)
- return -EINVAL;
-
- if ((list->phys_addr + list->size) >
- (temp_base + block_size * NUM_OF_ENTRY))
- return -EINVAL;
-
- /*
- * Check the address and size of the list member is
- * aligned with the block size.
- */
- if (((list->phys_addr & (block_size - 1)) != 0) ||
- ((list->size & (block_size - 1)) != 0))
- return -EINVAL;
-
- table->ptr = level_table;
- table->table_base = temp_base -
- ((index - 1) << block_shift);
- table->entry_size = block_size;
-
- return 0;
- }
- }
- return -EINVAL;
-}
-
/*
* To start MMU before DDR is available, we create MMU table in SRAM.
* The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
* levels of translation tables here to cover 40-bit address space.
* We use 4KB granule size, with 40 bits physical address, T0SZ=24
- * Level 0 IA[39], table address @0
- * Level 1 IA[38:30], table address @0x1000, 0x2000
- * Level 2 IA[29:21], table address @0x3000, 0x4000
- * Address above 0x5000 is free for other purpose.
+ * Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose.
+ * Note, the debug print in cache_v8.c is not usable for debugging
+ * these early MMU tables because UART is not yet available.
*/
static inline void early_mmu_setup(void)
{
- unsigned int el, i;
- u64 *level0_table = (u64 *)CONFIG_SYS_FSL_OCRAM_BASE;
- u64 *level1_table0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x1000);
- u64 *level1_table1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x2000);
- u64 *level2_table0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
- u64 *level2_table1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x4000);
-
- struct table_info table = {level0_table, 0, BLOCK_SIZE_L0};
-
- /* Invalidate all table entries */
- memset(level0_table, 0, 0x5000);
-
- /* Fill in the table entries */
- set_pgtable_table(level0_table, 0, level1_table0);
- set_pgtable_table(level0_table, 1, level1_table1);
- set_pgtable_table(level1_table0, 0, level2_table0);
+ unsigned int el = current_el();
-#ifdef CONFIG_FSL_LSCH3
- set_pgtable_table(level1_table0,
- CONFIG_SYS_FLASH_BASE >> SECTION_SHIFT_L1,
- level2_table1);
-#elif defined(CONFIG_FSL_LSCH2)
- set_pgtable_table(level1_table0, 1, level2_table1);
-#endif
- /* Find the table and fill in the block entries */
- for (i = 0; i < ARRAY_SIZE(early_mmu_table); i++) {
- if (find_table(&early_mmu_table[i],
- &table, level0_table) == 0) {
- /*
- * If find_table() returns error, it cannot be dealt
- * with here. Breakpoint can be added for debugging.
- */
- set_block_entry(&early_mmu_table[i], &table);
- /*
- * If set_block_entry() returns error, it cannot be
- * dealt with here too.
- */
- }
- }
+ /* global data is already setup, no allocation yet */
+ gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE;
+ gd->arch.tlb_fillptr = gd->arch.tlb_addr;
+ gd->arch.tlb_size = EARLY_PGTABLE_SIZE;
- el = current_el();
+ /* Create early page tables */
+ setup_pgtables();
- set_ttbr_tcr_mair(el, (u64)level0_table, LAYERSCAPE_TCR,
+ /* point TTBR to the new table */
+ set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
+ get_tcr(el, NULL, NULL) &
+ ~(TCR_ORGN_MASK | TCR_IRGN_MASK),
MEMORY_ATTRIBUTES);
+
set_sctlr(get_sctlr() | CR_M);
}
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-/*
- * Called from final mmu setup. The phys_addr is new, non-existing
- * address. A new sub table is created @level2_table_secure to cover
- * size of CONFIG_SYS_MEM_RESERVE_SECURE memory.
- */
-static inline int final_secure_ddr(u64 *level0_table,
- u64 *level2_table_secure,
- phys_addr_t phys_addr)
+static void fix_pcie_mmu_map(void)
{
- int ret = -EINVAL;
- struct table_info table = {};
- struct sys_mmu_table ddr_entry = {
- 0, 0, BLOCK_SIZE_L1, MT_NORMAL,
- PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
- };
- u64 index;
-
- /* Need to create a new table */
- ddr_entry.virt_addr = phys_addr & ~(BLOCK_SIZE_L1 - 1);
- ddr_entry.phys_addr = phys_addr & ~(BLOCK_SIZE_L1 - 1);
- ret = find_table(&ddr_entry, &table, level0_table);
- if (ret)
- return ret;
- index = (ddr_entry.virt_addr - table.table_base) >> SECTION_SHIFT_L1;
- set_pgtable_table(table.ptr, index, level2_table_secure);
- table.ptr = level2_table_secure;
- table.table_base = ddr_entry.virt_addr;
- table.entry_size = BLOCK_SIZE_L2;
- ret = set_block_entry(&ddr_entry, &table);
- if (ret) {
- printf("MMU error: could not fill non-secure ddr block entries\n");
- return ret;
- }
- ddr_entry.virt_addr = phys_addr;
- ddr_entry.phys_addr = phys_addr;
- ddr_entry.size = CONFIG_SYS_MEM_RESERVE_SECURE;
- ddr_entry.attribute = PTE_BLOCK_OUTER_SHARE;
- ret = find_table(&ddr_entry, &table, level0_table);
- if (ret) {
- printf("MMU error: could not find secure ddr table\n");
- return ret;
- }
- ret = set_block_entry(&ddr_entry, &table);
- if (ret)
- printf("MMU error: could not set secure ddr block entry\n");
+#ifdef CONFIG_LS2080A
+ unsigned int i;
+ u32 svr, ver;
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
- return ret;
-}
+ svr = gur_in32(&gur->svr);
+ ver = SVR_SOC_VER(svr);
+
+ /* Fix PCIE base and size for LS2088A */
+ if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) ||
+ (ver == SVR_LS2048A) || (ver == SVR_LS2044A)) {
+ for (i = 0; i < ARRAY_SIZE(final_map); i++) {
+ switch (final_map[i].phys) {
+ case CONFIG_SYS_PCIE1_PHYS_ADDR:
+ final_map[i].phys = 0x2000000000ULL;
+ final_map[i].virt = 0x2000000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ case CONFIG_SYS_PCIE2_PHYS_ADDR:
+ final_map[i].phys = 0x2800000000ULL;
+ final_map[i].virt = 0x2800000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ case CONFIG_SYS_PCIE3_PHYS_ADDR:
+ final_map[i].phys = 0x3000000000ULL;
+ final_map[i].virt = 0x3000000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ case CONFIG_SYS_PCIE4_PHYS_ADDR:
+ final_map[i].phys = 0x3800000000ULL;
+ final_map[i].virt = 0x3800000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ default:
+ break;
+ }
+ }
+ }
#endif
+}
/*
* The final tables look similar to early tables, but different in detail.
* These tables are in DRAM. Sub tables are added to enable cache for
* QBMan and OCRAM.
*
- * Put the MMU table in secure memory if gd->secure_ram is valid.
- * OCRAM will be not used for this purpose so gd->secure_ram can't be 0.
- *
- * Level 1 table 0 contains 512 entries for each 1GB from 0 to 512GB.
- * Level 1 table 1 contains 512 entries for each 1GB from 512GB to 1TB.
- * Level 2 table 0 contains 512 entries for each 2MB from 0 to 1GB.
- *
- * For LSCH3:
- * Level 2 table 1 contains 512 entries for each 2MB from 32GB to 33GB.
- * For LSCH2:
- * Level 2 table 1 contains 512 entries for each 2MB from 1GB to 2GB.
- * Level 2 table 2 contains 512 entries for each 2MB from 20GB to 21GB.
+ * Put the MMU table in secure memory if gd->arch.secure_ram is valid.
+ * OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0.
*/
static inline void final_mmu_setup(void)
{
+ u64 tlb_addr_save = gd->arch.tlb_addr;
unsigned int el = current_el();
- unsigned int i;
- u64 *level0_table = (u64 *)gd->arch.tlb_addr;
- u64 *level1_table0;
- u64 *level1_table1;
- u64 *level2_table0;
- u64 *level2_table1;
-#ifdef CONFIG_FSL_LSCH2
- u64 *level2_table2;
-#endif
- struct table_info table = {NULL, 0, BLOCK_SIZE_L0};
+ int index;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- u64 *level2_table_secure;
+ /* fix the final_map before filling in the block entries */
+ fix_pcie_mmu_map();
- if (el == 3) {
+ mem_map = final_map;
+
+ /* Update mapping for DDR to actual size */
+ for (index = 0; index < ARRAY_SIZE(final_map) - 2; index++) {
/*
- * Only use gd->secure_ram if the address is recalculated
- * Align to 4KB for MMU table
+ * Find the entry for DDR mapping and update the address and
+ * size. Zero-sized mapping will be skipped when creating MMU
+ * table.
*/
- if (gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED)
- level0_table = (u64 *)(gd->secure_ram & ~0xfff);
- else
- printf("MMU warning: gd->secure_ram is not maintained, disabled.\n");
- }
+ switch (final_map[index].virt) {
+ case CONFIG_SYS_FSL_DRAM_BASE1:
+ final_map[index].virt = gd->bd->bi_dram[0].start;
+ final_map[index].phys = gd->bd->bi_dram[0].start;
+ final_map[index].size = gd->bd->bi_dram[0].size;
+ break;
+#ifdef CONFIG_SYS_FSL_DRAM_BASE2
+ case CONFIG_SYS_FSL_DRAM_BASE2:
+#if (CONFIG_NR_DRAM_BANKS >= 2)
+ final_map[index].virt = gd->bd->bi_dram[1].start;
+ final_map[index].phys = gd->bd->bi_dram[1].start;
+ final_map[index].size = gd->bd->bi_dram[1].size;
+#else
+ final_map[index].size = 0;
#endif
- level1_table0 = level0_table + 512;
- level1_table1 = level1_table0 + 512;
- level2_table0 = level1_table1 + 512;
- level2_table1 = level2_table0 + 512;
-#ifdef CONFIG_FSL_LSCH2
- level2_table2 = level2_table1 + 512;
+ break;
#endif
- table.ptr = level0_table;
-
- /* Invalidate all table entries */
- memset(level0_table, 0, PGTABLE_SIZE);
-
- /* Fill in the table entries */
- set_pgtable_table(level0_table, 0, level1_table0);
- set_pgtable_table(level0_table, 1, level1_table1);
- set_pgtable_table(level1_table0, 0, level2_table0);
-#ifdef CONFIG_FSL_LSCH3
- set_pgtable_table(level1_table0,
- CONFIG_SYS_FSL_QBMAN_BASE >> SECTION_SHIFT_L1,
- level2_table1);
-#elif defined(CONFIG_FSL_LSCH2)
- set_pgtable_table(level1_table0, 1, level2_table1);
- set_pgtable_table(level1_table0,
- CONFIG_SYS_FSL_QBMAN_BASE >> SECTION_SHIFT_L1,
- level2_table2);
-#endif
-
- /* Find the table and fill in the block entries */
- for (i = 0; i < ARRAY_SIZE(final_mmu_table); i++) {
- if (find_table(&final_mmu_table[i],
- &table, level0_table) == 0) {
- if (set_block_entry(&final_mmu_table[i],
- &table) != 0) {
- printf("MMU error: could not set block entry for %p\n",
- &final_mmu_table[i]);
- }
-
- } else {
- printf("MMU error: could not find the table for %p\n",
- &final_mmu_table[i]);
+#ifdef CONFIG_SYS_FSL_DRAM_BASE3
+ case CONFIG_SYS_FSL_DRAM_BASE3:
+#if (CONFIG_NR_DRAM_BANKS >= 3)
+ final_map[index].virt = gd->bd->bi_dram[2].start;
+ final_map[index].phys = gd->bd->bi_dram[2].start;
+ final_map[index].size = gd->bd->bi_dram[2].size;
+#else
+ final_map[index].size = 0;
+#endif
+ break;
+#endif
+ default:
+ break;
}
}
- /* Set the secure memory to secure in MMU */
+
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- if (el == 3 && gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
-#ifdef CONFIG_FSL_LSCH3
- level2_table_secure = level2_table1 + 512;
-#elif defined(CONFIG_FSL_LSCH2)
- level2_table_secure = level2_table2 + 512;
-#endif
- if (!final_secure_ddr(level0_table,
- level2_table_secure,
- gd->secure_ram & ~0x3)) {
- gd->secure_ram |= MEM_RESERVE_SECURE_SECURED;
- debug("Now MMU table is in secured memory at 0x%llx\n",
- gd->secure_ram & ~0x3);
+ if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
+ if (el == 3) {
+ /*
+ * Only use gd->arch.secure_ram if the address is
+ * recalculated. Align to 4KB for MMU table.
+ */
+ /* put page tables in secure ram */
+ index = ARRAY_SIZE(final_map) - 2;
+ gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff;
+ final_map[index].virt = gd->arch.secure_ram & ~0x3;
+ final_map[index].phys = final_map[index].virt;
+ final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE;
+ final_map[index].attrs = PTE_BLOCK_OUTER_SHARE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
+ tlb_addr_save = gd->arch.tlb_addr;
} else {
- printf("MMU warning: Failed to secure DDR\n");
+ /* Use allocated (board_f.c) memory for TLB */
+ tlb_addr_save = gd->arch.tlb_allocated;
+ gd->arch.tlb_addr = tlb_addr_save;
}
}
#endif
- /* flush new MMU table */
- flush_dcache_range((ulong)level0_table,
- (ulong)level0_table + gd->arch.tlb_size);
+ /* Reset the fill ptr */
+ gd->arch.tlb_fillptr = tlb_addr_save;
+
+ /* Create normal system page tables */
+ setup_pgtables();
+
+ /* Create emergency page tables */
+ gd->arch.tlb_addr = gd->arch.tlb_fillptr;
+ gd->arch.tlb_emerg = gd->arch.tlb_addr;
+ setup_pgtables();
+ gd->arch.tlb_addr = tlb_addr_save;
+
+ /* Disable cache and MMU */
+ dcache_disable(); /* TLBs are invalidated */
+ invalidate_icache_all();
/* point TTBR to the new table */
- set_ttbr_tcr_mair(el, (u64)level0_table, LAYERSCAPE_TCR_FINAL,
+ set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
MEMORY_ATTRIBUTES);
- /*
- * MMU is already enabled, just need to invalidate TLB to load the
- * new table. The new table is compatible with the current table, if
- * MMU somehow walks through the new table before invalidation TLB,
- * it still works. So we don't need to turn off MMU here.
- */
+
+ set_sctlr(get_sctlr() | CR_M);
}
u64 get_page_table_size(void)
return 0;
}
+void mmu_setup(void)
+{
+ final_mmu_setup();
+}
+
/*
- * This function is called from lib/board.c.
- * It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
- * There is no need to disable d-cache for this operation.
+ * This function is called from common/board_r.c.
+ * It recreates MMU table in main memory.
*/
void enable_caches(void)
{
- final_mmu_setup();
+ mmu_setup();
__asm_invalidate_tlb_all();
+ icache_enable();
+ dcache_enable();
}
#endif
-static inline u32 initiator_type(u32 cluster, int init_id)
+u32 initiator_type(u32 cluster, int init_id)
{
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
return 0;
}
+u32 cpu_pos_mask(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ int i = 0;
+ u32 cluster, type, mask = 0;
+
+ do {
+ int j;
+
+ cluster = gur_in32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = initiator_type(cluster, j);
+ if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM))
+ mask |= 1 << (i * TP_INIT_PER_CLUSTER + j);
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC) == 0x0);
+
+ return mask;
+}
+
u32 cpu_mask(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
return -1; /* cannot identify the cluster */
}
+#ifndef CONFIG_FSL_LSCH3
uint get_svr(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
return gur_in32(&gur->svr);
}
+#endif
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
printf("CPU%d(%s):%-4s MHz ", core,
type == TY_ITYP_VER_A7 ? "A7 " :
(type == TY_ITYP_VER_A53 ? "A53" :
- (type == TY_ITYP_VER_A57 ? "A57" : " ")),
+ (type == TY_ITYP_VER_A57 ? "A57" :
+ (type == TY_ITYP_VER_A72 ? "A72" : " "))),
strmhz(buf, sysinfo.freq_processor[core]));
}
+ /* Display platform clock as Bus frequency. */
printf("\n Bus: %-4s MHz ",
- strmhz(buf, sysinfo.freq_systembus));
+ strmhz(buf, sysinfo.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV));
printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
#ifdef CONFIG_SYS_DPAA_FMAN
printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
{
#ifdef CONFIG_MP
int rv = 1;
+ u32 psci_ver = 0xffffffff;
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
- erratum_a009635();
+ u32 svr_dev_id;
+ /*
+ * erratum A009635 is valid only for LS2080A SoC and
+ * its personalitiesi
+ */
+ svr_dev_id = get_svr() >> 16;
+ if (svr_dev_id == SVR_DEV_LS2080A)
+ erratum_a009635();
+#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
+ erratum_a009942_check_cpo();
#endif
-
#ifdef CONFIG_MP
- rv = fsl_layerscape_wake_seconday_cores();
- if (rv)
- printf("Did not wake secondary cores\n");
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \
+ defined(CONFIG_SEC_FIRMWARE_ARMV8_PSCI)
+ /* Check the psci version to determine if the psci is supported */
+ psci_ver = sec_firmware_support_psci_version();
+#endif
+ if (psci_ver == 0xffffffff) {
+ rv = fsl_layerscape_wake_seconday_cores();
+ if (rv)
+ printf("Did not wake secondary cores\n");
+ }
#endif
#ifdef CONFIG_SYS_HAS_SERDES
#endif
#ifdef CONFIG_LS2080A
u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
+ u32 svr_dev_id;
#endif
#ifdef COUNTER_FREQUENCY_REAL
unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
* Register (PCTBENR), which allows the watchdog to operate.
*/
setbits_le32(pctbenr, 0xff);
+ /*
+ * For LS2080A SoC and its personalities, timer controller
+ * offset is different
+ */
+ svr_dev_id = get_svr() >> 16;
+ if (svr_dev_id == SVR_DEV_LS2080A)
+ cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
+
#endif
/* Enable clock for timer
return 0;
}
-void reset_cpu(ulong addr)
+__efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+
+void __efi_runtime reset_cpu(ulong addr)
{
- u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
u32 val;
/* Raise RESET_REQ_B */
scfg_out32(rstcr, val);
}
+#ifdef CONFIG_EFI_LOADER
+
+void __efi_runtime EFIAPI efi_reset_system(
+ enum efi_reset_type reset_type,
+ efi_status_t reset_status,
+ unsigned long data_size, void *reset_data)
+{
+ switch (reset_type) {
+ case EFI_RESET_COLD:
+ case EFI_RESET_WARM:
+ reset_cpu(0);
+ break;
+ case EFI_RESET_SHUTDOWN:
+ /* Nothing we can do */
+ break;
+ }
+
+ while (1) { }
+}
+
+void efi_reset_system_init(void)
+{
+ efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
+}
+
+#endif
+
phys_size_t board_reserve_ram_top(phys_size_t ram_size)
{
phys_size_t ram_top = ram_size;
-#ifdef CONFIG_SYS_MEM_TOP_HIDE
-#error CONFIG_SYS_MEM_TOP_HIDE not to be used together with this function
+#ifdef CONFIG_FSL_MC_ENET
+ /* The start address of MC reserved memory needs to be aligned. */
+ ram_top -= mc_get_dram_block_size();
+ ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
+#endif
+
+ return ram_size - ram_top;
+}
+
+phys_size_t get_effective_memsize(void)
+{
+ phys_size_t ea_size, rem = 0;
+
+ /*
+ * For ARMv8 SoCs, DDR memory is split into two or three regions. The
+ * first region is 2GB space at 0x8000_0000. If the memory extends to
+ * the second region (or the third region if applicable), the secure
+ * memory and Management Complex (MC) memory should be put into the
+ * highest region, i.e. the end of DDR memory. CONFIG_MAX_MEM_MAPPED
+ * is set to the size of first region so U-Boot doesn't relocate itself
+ * into higher address. Should DDR be configured to skip the first
+ * region, this function needs to be adjusted.
+ */
+ if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
+ ea_size = CONFIG_MAX_MEM_MAPPED;
+ rem = gd->ram_size - ea_size;
+ } else {
+ ea_size = gd->ram_size;
+ }
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ /* Check if we have enough space for secure memory */
+ if (rem > CONFIG_SYS_MEM_RESERVE_SECURE) {
+ rem -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ } else {
+ if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE) {
+ ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ rem = 0; /* Presume MC requires more memory */
+ } else {
+ printf("Error: No enough space for secure memory.\n");
+ }
+ }
+#endif
+ /* Check if we have enough memory for MC */
+ if (rem < board_reserve_ram_top(rem)) {
+ /* Not enough memory in high region to reserve */
+ if (ea_size > board_reserve_ram_top(rem))
+ ea_size -= board_reserve_ram_top(rem);
+ else
+ printf("Error: No enough space for reserved memory.\n");
+ }
+
+ return ea_size;
+}
+
+void dram_init_banksize(void)
+{
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+ phys_size_t dp_ddr_size;
+#endif
+
+ /*
+ * gd->ram_size has the total size of DDR memory, less reserved secure
+ * memory. The DDR extends from low region to high region(s) presuming
+ * no hole is created with DDR configuration. gd->arch.secure_ram tracks
+ * the location of secure memory. gd->arch.resv_ram tracks the location
+ * of reserved memory for Management Complex (MC).
+ */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+ if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
+ gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size -
+ CONFIG_SYS_DDR_BLOCK2_SIZE;
+ gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE;
+ }
#endif
-/* Carve the Debug Server private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_DEBUG_SERVER
- ram_top -= debug_server_get_dram_block_size();
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+ }
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+ if (gd->bd->bi_dram[2].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
+ gd->bd->bi_dram[2].size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ gd->arch.secure_ram = gd->bd->bi_dram[2].start +
+ gd->bd->bi_dram[2].size;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ } else
#endif
+ {
+ if (gd->bd->bi_dram[1].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
+ gd->bd->bi_dram[1].size -=
+ CONFIG_SYS_MEM_RESERVE_SECURE;
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->bd->bi_dram[1].size;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ } else if (gd->bd->bi_dram[0].size >
+ CONFIG_SYS_MEM_RESERVE_SECURE) {
+ gd->bd->bi_dram[0].size -=
+ CONFIG_SYS_MEM_RESERVE_SECURE;
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->bd->bi_dram[0].size;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ }
+ }
+#endif /* CONFIG_SYS_MEM_RESERVE_SECURE */
-/* Carve the MC private DRAM block from the end of DRAM */
#ifdef CONFIG_FSL_MC_ENET
- ram_top -= mc_get_dram_block_size();
- ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
+ /* Assign memory for MC */
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+ if (gd->bd->bi_dram[2].size >=
+ board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
+ gd->arch.resv_ram = gd->bd->bi_dram[2].start +
+ gd->bd->bi_dram[2].size -
+ board_reserve_ram_top(gd->bd->bi_dram[2].size);
+ } else
#endif
+ {
+ if (gd->bd->bi_dram[1].size >=
+ board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
+ gd->arch.resv_ram = gd->bd->bi_dram[1].start +
+ gd->bd->bi_dram[1].size -
+ board_reserve_ram_top(gd->bd->bi_dram[1].size);
+ } else if (gd->bd->bi_dram[0].size >
+ board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
+ gd->arch.resv_ram = gd->bd->bi_dram[0].start +
+ gd->bd->bi_dram[0].size -
+ board_reserve_ram_top(gd->bd->bi_dram[0].size);
+ }
+ }
+#endif /* CONFIG_FSL_MC_ENET */
- return ram_top;
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+ if (soc_has_dp_ddr()) {
+ /* initialize DP-DDR here */
+ puts("DP-DDR: ");
+ /*
+ * DDR controller use 0 as the base address for binding.
+ * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+ */
+ dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+ CONFIG_DP_DDR_CTRL,
+ CONFIG_DP_DDR_NUM_CTRLS,
+ CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
+ NULL, NULL, NULL);
+ if (dp_ddr_size) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+ gd->bd->bi_dram[2].size = dp_ddr_size;
+ } else {
+ puts("Not detected");
+ }
+ }
+#endif
+}
+
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
+void efi_add_known_memory(void)
+{
+ int i;
+ phys_addr_t ram_start, start;
+ phys_size_t ram_size;
+ u64 pages;
+
+ /* Add RAM */
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+ if (i == 2)
+ continue; /* skip DP-DDR */
+#endif
+ ram_start = gd->bd->bi_dram[i].start;
+ ram_size = gd->bd->bi_dram[i].size;
+#ifdef CONFIG_RESV_RAM
+ if (gd->arch.resv_ram >= ram_start &&
+ gd->arch.resv_ram < ram_start + ram_size)
+ ram_size = gd->arch.resv_ram - ram_start;
+#endif
+ start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
+ pages = (ram_size + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
+
+ efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY,
+ false);
+ }
+}
+#endif
+
+/*
+ * Before DDR size is known, early MMU table have DDR mapped as device memory
+ * to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
+ * needs to be set for these mappings.
+ * If a special case configures DDR with holes in the mapping, the holes need
+ * to be marked as invalid. This is not implemented in this function.
+ */
+void update_early_mmu_table(void)
+{
+ if (!gd->arch.tlb_addr)
+ return;
+
+ if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
+ mmu_change_region_attr(
+ CONFIG_SYS_SDRAM_BASE,
+ gd->ram_size,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ } else {
+ mmu_change_region_attr(
+ CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_DDR_BLOCK1_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
+#error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
+#endif
+ if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
+ CONFIG_SYS_DDR_BLOCK2_SIZE) {
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK2_BASE,
+ CONFIG_SYS_DDR_BLOCK2_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK3_BASE,
+ gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE -
+ CONFIG_SYS_DDR_BLOCK2_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ } else
+#endif
+ {
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK2_BASE,
+ gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ }
+ }
+}
+
+__weak int dram_init(void)
+{
+ gd->ram_size = initdram(0);
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+ /* This will break-before-make MMU for DDR */
+ update_early_mmu_table();
+#endif
+
+ return 0;
}