set_sctlr(get_sctlr() | CR_M);
}
+static void fix_pcie_mmu_map(void)
+{
+#ifdef CONFIG_LS2080A
+ unsigned int i;
+ u32 svr, ver;
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ svr = gur_in32(&gur->svr);
+ ver = SVR_SOC_VER(svr);
+
+ /* Fix PCIE base and size for LS2088A */
+ if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) ||
+ (ver == SVR_LS2048A) || (ver == SVR_LS2044A)) {
+ for (i = 0; i < ARRAY_SIZE(final_map); i++) {
+ switch (final_map[i].phys) {
+ case CONFIG_SYS_PCIE1_PHYS_ADDR:
+ final_map[i].phys = 0x2000000000ULL;
+ final_map[i].virt = 0x2000000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ case CONFIG_SYS_PCIE2_PHYS_ADDR:
+ final_map[i].phys = 0x2800000000ULL;
+ final_map[i].virt = 0x2800000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ case CONFIG_SYS_PCIE3_PHYS_ADDR:
+ final_map[i].phys = 0x3000000000ULL;
+ final_map[i].virt = 0x3000000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ case CONFIG_SYS_PCIE4_PHYS_ADDR:
+ final_map[i].phys = 0x3800000000ULL;
+ final_map[i].virt = 0x3800000000ULL;
+ final_map[i].size = 0x800000000ULL;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+#endif
+}
+
/*
* The final tables look similar to early tables, but different in detail.
* These tables are in DRAM. Sub tables are added to enable cache for
unsigned int el = current_el();
int index;
+ /* fix the final_map before filling in the block entries */
+ fix_pcie_mmu_map();
+
mem_map = final_map;
/* Update mapping for DDR to actual size */
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
- erratum_a009635();
+ u32 svr_dev_id;
+ /*
+ * erratum A009635 is valid only for LS2080A SoC and
+ * its personalitiesi
+ */
+ svr_dev_id = get_svr() >> 16;
+ if (svr_dev_id == SVR_DEV_LS2080A)
+ erratum_a009635();
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
erratum_a009942_check_cpo();
}
}
#endif
+
+/*
+ * Before DDR size is known, early MMU table have DDR mapped as device memory
+ * to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
+ * needs to be set for these mappings.
+ * If a special case configures DDR with holes in the mapping, the holes need
+ * to be marked as invalid. This is not implemented in this function.
+ */
+void update_early_mmu_table(void)
+{
+ if (!gd->arch.tlb_addr)
+ return;
+
+ if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
+ mmu_change_region_attr(
+ CONFIG_SYS_SDRAM_BASE,
+ gd->ram_size,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ } else {
+ mmu_change_region_attr(
+ CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_DDR_BLOCK1_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
+#error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
+#endif
+ if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
+ CONFIG_SYS_DDR_BLOCK2_SIZE) {
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK2_BASE,
+ CONFIG_SYS_DDR_BLOCK2_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK3_BASE,
+ gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE -
+ CONFIG_SYS_DDR_BLOCK2_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ } else
+#endif
+ {
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK2_BASE,
+ gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ }
+ }
+}
+
+__weak int dram_init(void)
+{
+ gd->ram_size = initdram(0);
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+ /* This will break-before-make MMU for DDR */
+ update_early_mmu_table();
+#endif
+
+ return 0;
+}