#include <common.h>
#include <asm/io.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/system.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
+#include <efi_loader.h>
#include <fm_eth.h>
-#include <fsl_debug_server.h>
#include <fsl-mc/fsl_mc.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
+#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
+#include <asm/armv8/sec_firmware.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
+struct mm_region *mem_map = early_map;
+
void cpu_name(char *name)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
if (IS_E_PROCESSOR(svr))
strcat(name, "E");
+
+ sprintf(name + strlen(name), " Rev%d.%d",
+ SVR_MAJ(svr), SVR_MIN(svr));
break;
}
}
#ifndef CONFIG_SYS_DCACHE_OFF
-/*
- * Set the block entries according to the information of the table.
- */
-static int set_block_entry(const struct sys_mmu_table *list,
- struct table_info *table)
-{
- u64 block_size = 0, block_shift = 0;
- u64 block_addr, index;
- int j;
-
- if (table->entry_size == BLOCK_SIZE_L1) {
- block_size = BLOCK_SIZE_L1;
- block_shift = SECTION_SHIFT_L1;
- } else if (table->entry_size == BLOCK_SIZE_L2) {
- block_size = BLOCK_SIZE_L2;
- block_shift = SECTION_SHIFT_L2;
- } else {
- return -EINVAL;
- }
-
- block_addr = list->phys_addr;
- index = (list->virt_addr - table->table_base) >> block_shift;
-
- for (j = 0; j < (list->size >> block_shift); j++) {
- set_pgtable_section(table->ptr,
- index,
- block_addr,
- list->memory_type,
- list->share);
- block_addr += block_size;
- index++;
- }
-
- return 0;
-}
-
-/*
- * Find the corresponding table entry for the list.
- */
-static int find_table(const struct sys_mmu_table *list,
- struct table_info *table, u64 *level0_table)
-{
- u64 index = 0, level = 0;
- u64 *level_table = level0_table;
- u64 temp_base = 0, block_size = 0, block_shift = 0;
-
- while (level < 3) {
- if (level == 0) {
- block_size = BLOCK_SIZE_L0;
- block_shift = SECTION_SHIFT_L0;
- } else if (level == 1) {
- block_size = BLOCK_SIZE_L1;
- block_shift = SECTION_SHIFT_L1;
- } else if (level == 2) {
- block_size = BLOCK_SIZE_L2;
- block_shift = SECTION_SHIFT_L2;
- }
-
- index = 0;
- while (list->virt_addr >= temp_base) {
- index++;
- temp_base += block_size;
- }
-
- temp_base -= block_size;
-
- if ((level_table[index - 1] & PMD_TYPE_MASK) ==
- PMD_TYPE_TABLE) {
- level_table = (u64 *)(level_table[index - 1] &
- ~PMD_TYPE_MASK);
- level++;
- continue;
- } else {
- if (level == 0)
- return -EINVAL;
-
- if ((list->phys_addr + list->size) >
- (temp_base + block_size * NUM_OF_ENTRY))
- return -EINVAL;
-
- /*
- * Check the address and size of the list member is
- * aligned with the block size.
- */
- if (((list->phys_addr & (block_size - 1)) != 0) ||
- ((list->size & (block_size - 1)) != 0))
- return -EINVAL;
-
- table->ptr = level_table;
- table->table_base = temp_base -
- ((index - 1) << block_shift);
- table->entry_size = block_size;
-
- return 0;
- }
- }
- return -EINVAL;
-}
-
/*
* To start MMU before DDR is available, we create MMU table in SRAM.
* The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
* levels of translation tables here to cover 40-bit address space.
* We use 4KB granule size, with 40 bits physical address, T0SZ=24
- * Level 0 IA[39], table address @0
- * Level 1 IA[38:30], table address @0x1000, 0x2000
- * Level 2 IA[29:21], table address @0x3000, 0x4000
- * Address above 0x5000 is free for other purpose.
+ * Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose.
+ * Note, the debug print in cache_v8.c is not usable for debugging
+ * these early MMU tables because UART is not yet available.
*/
static inline void early_mmu_setup(void)
{
- unsigned int el, i;
- u64 *level0_table = (u64 *)CONFIG_SYS_FSL_OCRAM_BASE;
- u64 *level1_table0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x1000);
- u64 *level1_table1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x2000);
- u64 *level2_table0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
- u64 *level2_table1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x4000);
-
- struct table_info table = {level0_table, 0, BLOCK_SIZE_L0};
+ unsigned int el = current_el();
- /* Invalidate all table entries */
- memset(level0_table, 0, 0x5000);
+ /* global data is already setup, no allocation yet */
+ gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE;
+ gd->arch.tlb_fillptr = gd->arch.tlb_addr;
+ gd->arch.tlb_size = EARLY_PGTABLE_SIZE;
- /* Fill in the table entries */
- set_pgtable_table(level0_table, 0, level1_table0);
- set_pgtable_table(level0_table, 1, level1_table1);
- set_pgtable_table(level1_table0, 0, level2_table0);
+ /* Create early page tables */
+ setup_pgtables();
-#ifdef CONFIG_FSL_LSCH3
- set_pgtable_table(level1_table0,
- CONFIG_SYS_FLASH_BASE >> SECTION_SHIFT_L1,
- level2_table1);
-#elif defined(CONFIG_FSL_LSCH2)
- set_pgtable_table(level1_table0, 1, level2_table1);
-#endif
- /* Find the table and fill in the block entries */
- for (i = 0; i < ARRAY_SIZE(early_mmu_table); i++) {
- if (find_table(&early_mmu_table[i],
- &table, level0_table) == 0) {
- /*
- * If find_table() returns error, it cannot be dealt
- * with here. Breakpoint can be added for debugging.
- */
- set_block_entry(&early_mmu_table[i], &table);
- /*
- * If set_block_entry() returns error, it cannot be
- * dealt with here too.
- */
- }
- }
-
- el = current_el();
-
- set_ttbr_tcr_mair(el, (u64)level0_table, LAYERSCAPE_TCR,
+ /* point TTBR to the new table */
+ set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
+ get_tcr(el, NULL, NULL) &
+ ~(TCR_ORGN_MASK | TCR_IRGN_MASK),
MEMORY_ATTRIBUTES);
+
set_sctlr(get_sctlr() | CR_M);
}
* These tables are in DRAM. Sub tables are added to enable cache for
* QBMan and OCRAM.
*
- * Level 1 table 0 contains 512 entries for each 1GB from 0 to 512GB.
- * Level 1 table 1 contains 512 entries for each 1GB from 512GB to 1TB.
- * Level 2 table 0 contains 512 entries for each 2MB from 0 to 1GB.
- *
- * For LSCH3:
- * Level 2 table 1 contains 512 entries for each 2MB from 32GB to 33GB.
- * For LSCH2:
- * Level 2 table 1 contains 512 entries for each 2MB from 1GB to 2GB.
- * Level 2 table 2 contains 512 entries for each 2MB from 20GB to 21GB.
+ * Put the MMU table in secure memory if gd->arch.secure_ram is valid.
+ * OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0.
*/
static inline void final_mmu_setup(void)
{
- unsigned int el, i;
- u64 *level0_table = (u64 *)gd->arch.tlb_addr;
- u64 *level1_table0 = (u64 *)(gd->arch.tlb_addr + 0x1000);
- u64 *level1_table1 = (u64 *)(gd->arch.tlb_addr + 0x2000);
- u64 *level2_table0 = (u64 *)(gd->arch.tlb_addr + 0x3000);
-#ifdef CONFIG_FSL_LSCH3
- u64 *level2_table1 = (u64 *)(gd->arch.tlb_addr + 0x4000);
-#elif defined(CONFIG_FSL_LSCH2)
- u64 *level2_table1 = (u64 *)(gd->arch.tlb_addr + 0x4000);
- u64 *level2_table2 = (u64 *)(gd->arch.tlb_addr + 0x5000);
+ u64 tlb_addr_save = gd->arch.tlb_addr;
+ unsigned int el = current_el();
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ int index;
#endif
- struct table_info table = {level0_table, 0, BLOCK_SIZE_L0};
-
- /* Invalidate all table entries */
- memset(level0_table, 0, PGTABLE_SIZE);
- /* Fill in the table entries */
- set_pgtable_table(level0_table, 0, level1_table0);
- set_pgtable_table(level0_table, 1, level1_table1);
- set_pgtable_table(level1_table0, 0, level2_table0);
-#ifdef CONFIG_FSL_LSCH3
- set_pgtable_table(level1_table0,
- CONFIG_SYS_FSL_QBMAN_BASE >> SECTION_SHIFT_L1,
- level2_table1);
-#elif defined(CONFIG_FSL_LSCH2)
- set_pgtable_table(level1_table0, 1, level2_table1);
- set_pgtable_table(level1_table0,
- CONFIG_SYS_FSL_QBMAN_BASE >> SECTION_SHIFT_L1,
- level2_table2);
-#endif
-
- /* Find the table and fill in the block entries */
- for (i = 0; i < ARRAY_SIZE(final_mmu_table); i++) {
- if (find_table(&final_mmu_table[i],
- &table, level0_table) == 0) {
- if (set_block_entry(&final_mmu_table[i],
- &table) != 0) {
- printf("MMU error: could not set block entry for %p\n",
- &final_mmu_table[i]);
- }
+ mem_map = final_map;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
+ if (el == 3) {
+ /*
+ * Only use gd->arch.secure_ram if the address is
+ * recalculated. Align to 4KB for MMU table.
+ */
+ /* put page tables in secure ram */
+ index = ARRAY_SIZE(final_map) - 2;
+ gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff;
+ final_map[index].virt = gd->arch.secure_ram & ~0x3;
+ final_map[index].phys = final_map[index].virt;
+ final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE;
+ final_map[index].attrs = PTE_BLOCK_OUTER_SHARE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
+ tlb_addr_save = gd->arch.tlb_addr;
} else {
- printf("MMU error: could not find the table for %p\n",
- &final_mmu_table[i]);
+ /* Use allocated (board_f.c) memory for TLB */
+ tlb_addr_save = gd->arch.tlb_allocated;
+ gd->arch.tlb_addr = tlb_addr_save;
}
}
+#endif
+
+ /* Reset the fill ptr */
+ gd->arch.tlb_fillptr = tlb_addr_save;
+
+ /* Create normal system page tables */
+ setup_pgtables();
+
+ /* Create emergency page tables */
+ gd->arch.tlb_addr = gd->arch.tlb_fillptr;
+ gd->arch.tlb_emerg = gd->arch.tlb_addr;
+ setup_pgtables();
+ gd->arch.tlb_addr = tlb_addr_save;
/* flush new MMU table */
flush_dcache_range(gd->arch.tlb_addr,
gd->arch.tlb_addr + gd->arch.tlb_size);
/* point TTBR to the new table */
- el = current_el();
-
- set_ttbr_tcr_mair(el, (u64)level0_table, LAYERSCAPE_TCR_FINAL,
+ set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
MEMORY_ATTRIBUTES);
/*
- * MMU is already enabled, just need to invalidate TLB to load the
+ * EL3 MMU is already enabled, just need to invalidate TLB to load the
* new table. The new table is compatible with the current table, if
* MMU somehow walks through the new table before invalidation TLB,
* it still works. So we don't need to turn off MMU here.
+ * When EL2 MMU table is created by calling this function, MMU needs
+ * to be enabled.
*/
+ set_sctlr(get_sctlr() | CR_M);
+}
+
+u64 get_page_table_size(void)
+{
+ return 0x10000;
}
int arch_cpu_init(void)
return 0;
}
+void mmu_setup(void)
+{
+ final_mmu_setup();
+}
+
/*
- * This function is called from lib/board.c.
- * It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
- * There is no need to disable d-cache for this operation.
+ * This function is called from common/board_r.c.
+ * It recreates MMU table in main memory.
*/
void enable_caches(void)
{
- final_mmu_setup();
+ mmu_setup();
__asm_invalidate_tlb_all();
+ icache_enable();
+ dcache_enable();
}
#endif
-static inline u32 initiator_type(u32 cluster, int init_id)
+u32 initiator_type(u32 cluster, int init_id)
{
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
return 0;
}
+u32 cpu_pos_mask(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ int i = 0;
+ u32 cluster, type, mask = 0;
+
+ do {
+ int j;
+
+ cluster = gur_in32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = initiator_type(cluster, j);
+ if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM))
+ mask |= 1 << (i * TP_INIT_PER_CLUSTER + j);
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC) == 0x0);
+
+ return mask;
+}
+
u32 cpu_mask(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
return -1; /* cannot identify the cluster */
}
+#ifndef CONFIG_FSL_LSCH3
+uint get_svr(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ return gur_in32(&gur->svr);
+}
+#endif
+
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
struct sys_info sysinfo;
char buf[32];
unsigned int i, core;
- u32 type, rcw;
+ u32 type, rcw, svr = gur_in32(&gur->svr);
puts("SoC: ");
cpu_name(buf);
- printf(" %s (0x%x)\n", buf, gur_in32(&gur->svr));
+ printf(" %s (0x%x)\n", buf, svr);
memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
get_sys_info(&sysinfo);
puts("Clock Configuration:");
printf("CPU%d(%s):%-4s MHz ", core,
type == TY_ITYP_VER_A7 ? "A7 " :
(type == TY_ITYP_VER_A53 ? "A53" :
- (type == TY_ITYP_VER_A57 ? "A57" : " ")),
+ (type == TY_ITYP_VER_A57 ? "A57" :
+ (type == TY_ITYP_VER_A72 ? "A72" : " "))),
strmhz(buf, sysinfo.freq_processor[core]));
}
printf("\n Bus: %-4s MHz ",
strmhz(buf, sysinfo.freq_systembus));
printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
-#ifdef CONFIG_FSL_LSCH3
- printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2));
+#ifdef CONFIG_SYS_DPAA_FMAN
+ printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
+#endif
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+ if (soc_has_dp_ddr()) {
+ printf(" DP-DDR: %-4s MT/s",
+ strmhz(buf, sysinfo.freq_ddrbus2));
+ }
#endif
puts("\n");
#ifdef CONFIG_FSL_MC_ENET
error = fsl_mc_ldpaa_init(bis);
+#endif
+#ifdef CONFIG_FMAN_ENET
+ fm_standard_init(bis);
#endif
return error;
}
{
#ifdef CONFIG_MP
int rv = 1;
+ u32 psci_ver = 0xffffffff;
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+ erratum_a009635();
+#endif
- rv = fsl_layerscape_wake_seconday_cores();
- if (rv)
- printf("Did not wake secondary cores\n");
+#ifdef CONFIG_MP
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && defined(CONFIG_ARMV8_PSCI)
+ /* Check the psci version to determine if the psci is supported */
+ psci_ver = sec_firmware_support_psci_version();
+#endif
+ if (psci_ver == 0xffffffff) {
+ rv = fsl_layerscape_wake_seconday_cores();
+ if (rv)
+ printf("Did not wake secondary cores\n");
+ }
#endif
#ifdef CONFIG_SYS_HAS_SERDES
fsl_serdes_init();
+#endif
+#ifdef CONFIG_FMAN_ENET
+ fman_enet_init();
#endif
return 0;
}
#ifdef CONFIG_FSL_LSCH3
u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
#endif
+#ifdef CONFIG_LS2080A
+ u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
+ u32 svr_dev_id;
+#endif
#ifdef COUNTER_FREQUENCY_REAL
unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
out_le32(cltbenr, 0xf);
#endif
+#ifdef CONFIG_LS2080A
+ /*
+ * In certain Layerscape SoCs, the clock for each core's
+ * has an enable bit in the PMU Physical Core Time Base Enable
+ * Register (PCTBENR), which allows the watchdog to operate.
+ */
+ setbits_le32(pctbenr, 0xff);
+ /*
+ * For LS2080A SoC and its personalities, timer controller
+ * offset is different
+ */
+ svr_dev_id = get_svr() >> 16;
+ if (svr_dev_id == SVR_DEV_LS2080A)
+ cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
+
+#endif
+
/* Enable clock for timer
* This is a global setting.
*/
return 0;
}
-void reset_cpu(ulong addr)
+__efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+
+void __efi_runtime reset_cpu(ulong addr)
{
- u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
u32 val;
/* Raise RESET_REQ_B */
val |= 0x02;
scfg_out32(rstcr, val);
}
+
+#ifdef CONFIG_EFI_LOADER
+
+void __efi_runtime EFIAPI efi_reset_system(
+ enum efi_reset_type reset_type,
+ efi_status_t reset_status,
+ unsigned long data_size, void *reset_data)
+{
+ switch (reset_type) {
+ case EFI_RESET_COLD:
+ case EFI_RESET_WARM:
+ reset_cpu(0);
+ break;
+ case EFI_RESET_SHUTDOWN:
+ /* Nothing we can do */
+ break;
+ }
+
+ while (1) { }
+}
+
+void efi_reset_system_init(void)
+{
+ efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
+}
+
+#endif
+
+phys_size_t board_reserve_ram_top(phys_size_t ram_size)
+{
+ phys_size_t ram_top = ram_size;
+
+#ifdef CONFIG_SYS_MEM_TOP_HIDE
+#error CONFIG_SYS_MEM_TOP_HIDE not to be used together with this function
+#endif
+
+/* Carve the MC private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_MC_ENET
+ ram_top -= mc_get_dram_block_size();
+ ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
+#endif
+
+ return ram_top;
+}