*/
#include <common.h>
+#include <efi_loader.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <phy.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
+#include <fsl_fman.h>
+#endif
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
+#include <fsl_sec.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
+#include <asm/armv8/sec_firmware.h>
+#endif
int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
int addr_cells;
u64 val, core_id;
size_t *boot_code_size = &(__secondary_boot_code_size);
-
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && defined(CONFIG_ARMV8_PSCI)
+ int node;
+ u32 psci_ver;
+
+ /* Check the psci version to determine if the psci is supported */
+ psci_ver = sec_firmware_support_psci_version();
+ if (psci_ver == 0xffffffff) {
+ /* remove psci DT node */
+ node = fdt_path_offset(blob, "/psci");
+ if (node >= 0)
+ goto remove_psci_node;
+
+ node = fdt_node_offset_by_compatible(blob, -1, "arm,psci");
+ if (node >= 0)
+ goto remove_psci_node;
+
+ node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-0.2");
+ if (node >= 0)
+ goto remove_psci_node;
+
+ node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-1.0");
+ if (node >= 0)
+ goto remove_psci_node;
+
+remove_psci_node:
+ if (node >= 0)
+ fdt_del_node(blob, node);
+ } else {
+ return;
+ }
+#endif
off = fdt_path_offset(blob, "/cpus");
if (off < 0) {
puts("couldn't find /cpus node\n");
fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code,
*boot_code_size);
-}
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
+ efi_add_memory_map((uintptr_t)&secondary_boot_code,
+ ALIGN(*boot_code_size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
+ EFI_RESERVED_MEMORY_TYPE, false);
#endif
-
-/*
- * the burden is on the the caller to not request a count
- * exceeding the bounds of the stream_ids[] array
- */
-void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt)
-{
- int i;
-
- if (count > max_cnt) {
- printf("\n%s: ERROR: max per-device stream ID count exceed\n",
- __func__);
- return;
- }
-
- for (i = 0; i < count; i++)
- stream_ids[i] = start_id++;
}
+#endif
-/*
- * This function updates the mmu-masters property on the SMMU
- * node as per the SMMU binding-- phandle and list of stream IDs
- * for each MMU master.
- */
-void append_mmu_masters(void *blob, const char *smmu_path,
- const char *master_name, u32 *stream_ids, int count)
+void fsl_fdt_disable_usb(void *blob)
{
- u32 phandle;
- int smmu_nodeoffset;
- int master_nodeoffset;
- int i;
-
- /* get phandle of mmu master device */
- master_nodeoffset = fdt_path_offset(blob, master_name);
- if (master_nodeoffset < 0) {
- printf("\n%s: ERROR: master not found\n", __func__);
- return;
- }
- phandle = fdt_get_phandle(blob, master_nodeoffset);
- if (!phandle) { /* if master has no phandle, create one */
- phandle = fdt_create_phandle(blob, master_nodeoffset);
- if (!phandle) {
- printf("\n%s: ERROR: unable to create phandle\n",
- __func__);
- return;
+ int off;
+ /*
+ * SYSCLK is used as a reference clock for USB. When the USB
+ * controller is used, SYSCLK must meet the additional requirement
+ * of 100 MHz.
+ */
+ if (CONFIG_SYS_CLK_FREQ != 100000000) {
+ off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
+ while (off != -FDT_ERR_NOTFOUND) {
+ fdt_status_disabled(blob, off);
+ off = fdt_node_offset_by_compatible(blob, off,
+ "snps,dwc3");
}
}
-
- /* append it to mmu-masters */
- smmu_nodeoffset = fdt_path_offset(blob, smmu_path);
- if (fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters",
- phandle) < 0) {
- printf("\n%s: ERROR: unable to update SMMU node\n", __func__);
- return;
- }
-
- /* for each stream ID, append to mmu-masters */
- for (i = 0; i < count; i++) {
- fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters",
- stream_ids[i]);
- }
-
- /* fix up #stream-id-cells with stream ID count */
- if (fdt_setprop_u32(blob, master_nodeoffset, "#stream-id-cells",
- count) < 0)
- printf("\n%s: ERROR: unable to update #stream-id-cells\n",
- __func__);
}
-
-/*
- * The info below summarizes how streamID partitioning works
- * for ls2085a and how it is conveyed to the OS via the device tree.
- *
- * -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
- * -all legacy devices get a unique ICID assigned and programmed in
- * their AMQR registers by u-boot
- * -u-boot updates the hardware device tree with streamID properties
- * for each platform/legacy device (smmu-masters property)
- *
- * -PCIe
- * -for each PCI controller that is active (as per RCW settings),
- * u-boot will allocate a range of ICID and convey that to Linux via
- * the device tree (smmu-masters property)
- *
- * -DPAA2
- * -u-boot will allocate a range of ICIDs to be used by the Management
- * Complex for containers and will set these values in the MC DPC image.
- * -the MC is responsible for allocating and setting up ICIDs
- * for all DPAA2 devices.
- *
- */
-#ifdef CONFIG_FSL_LSCH3
-static void fdt_fixup_smmu(void *blob)
+void ft_cpu_setup(void *blob, bd_t *bd)
{
- int nodeoffset;
-
- nodeoffset = fdt_path_offset(blob, "/iommu@5000000");
- if (nodeoffset < 0) {
- printf("\n%s: WARNING: no SMMU node found\n", __func__);
- return;
+#ifdef CONFIG_FSL_LSCH2
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ unsigned int svr = in_be32(&gur->svr);
+
+ /* delete crypto node if not on an E-processor */
+ if (!IS_E_PROCESSOR(svr))
+ fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+ else {
+ ccsr_sec_t __iomem *sec;
+
+ sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+ fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
}
-
- /* fixup for all PCI controllers */
-#ifdef CONFIG_PCI
- fdt_fixup_smmu_pcie(blob);
#endif
-}
#endif
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
#ifdef CONFIG_MP
ft_fixup_cpu(blob);
#endif
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
+ do_fixup_by_compat_u32(blob, "fixed-clock",
+ "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
fdt_fixup_esdhc(blob, bd);
#endif
-#ifdef CONFIG_FSL_LSCH3
- fdt_fixup_smmu(blob);
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_firmware(blob);
#endif
+ fsl_fdt_disable_usb(blob);
+
}