am33xx:ddr:Fix config_sdram to work for all DDR

[u-boot] / arch / arm / cpu / sa1100 / start.S

diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index b34e946554e10027087af64fb102760863cb4520..4bf6f5fe97ee103d53ad012af9a64c891dcf19be 100644 (file)
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -4,7 +4,7 @@
  *  Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
  *  Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
  *  Copyright (C) 2000 Wolfgang Denk <wd@denx.de>
- *  Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -88,6 +88,10 @@ _bss_start_ofs:
 
 .globl _bss_end_ofs
 _bss_end_ofs:
+       .word __bss_end - _start
+
+.globl _end_ofs
+_end_ofs:
        .word _end - _start
 
 #ifdef CONFIG_USE_IRQ
@@ -128,12 +132,7 @@ reset:
        bl      cpu_init_crit
 #endif
 
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-       ldr     sp, =(CONFIG_SYS_INIT_SP_ADDR)
-       bic     sp, sp, #7 /* 8-byte alignment for ABI compliance */
-       ldr     r0,=0x00000000
-       bl      board_init_f
+       bl      _main
 
 /*------------------------------------------------------------------------------*/
 
@@ -150,15 +149,11 @@ relocate_code:
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
 
-       /* Set up the stack                                                 */
-stack_setup:
-       mov     sp, r4
-
        adr     r0, _start
        cmp     r0, r6
-       beq     clear_bss               /* skip relocation */
+       moveq   r9, #0          /* no relocation. relocation offset(r9) = 0 */
+       beq     relocate_done           /* skip relocation */
        mov     r1, r6                  /* r1 <- scratch for copy_loop */
-       ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
 
@@ -168,7 +163,7 @@ copy_loop:
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
-#ifndef CONFIG_PRELOADER
+#ifndef CONFIG_SPL_BUILD
        /*
         * fix .rel.dyn relocations
         */
@@ -196,7 +191,7 @@ fixabs:
        mov     r1, r1, LSR #4          /* r1 <- symbol index in .dynsym */
        add     r1, r10, r1             /* r1 <- address of symbol in table */
        ldr     r1, [r1, #4]            /* r1 <- symbol value */
-       add     r1, r9                  /* r1 <- relocated sym addr */
+       add     r1, r1, r9              /* r1 <- relocated sym addr */
        b       fixnext
 fixrel:
        /* relative fix: increase location by offset */
@@ -209,39 +204,10 @@ fixnext:
        blo     fixloop
 #endif
 
-clear_bss:
-#ifndef CONFIG_PRELOADER
-       ldr     r0, _bss_start_ofs
-       ldr     r1, _bss_end_ofs
-       ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r6                  /* reloc addr */
-       add     r0, r0, r4
-       add     r1, r1, r4
-       mov     r2, #0x00000000         /* clear                            */
-
-clbss_l:str    r2, [r0]                /* clear loop...                    */
-       add     r0, r0, #4
-       cmp     r0, r1
-       bne     clbss_l
-#endif
+relocate_done:
 
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-       ldr     r0, _board_init_r_ofs
-       adr     r1, _start
-       add     lr, r0, r1
-       add     lr, lr, r9
-       /* setup parameters for board_init_r */
-       mov     r0, r5          /* gd_t */
-       mov     r1, r6          /* dest_addr */
-       /* jump to it ... */
        mov     pc, lr
 
-_board_init_r_ofs:
-       .word board_init_r - _start
-
 _rel_dyn_start_ofs:
        .word __rel_dyn_start - _start
 _rel_dyn_end_ofs:
@@ -249,6 +215,11 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
        .word __dynsym_start - _start
 
+       .globl  c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+       mov     pc, lr
+
 /*
  *************************************************************************
  *
@@ -261,7 +232,7 @@ _dynsym_start_ofs:
  */
 
 
-/* Interupt-Controller base address */
+/* Interrupt-Controller base address */
 IC_BASE:       .word   0x90050000
 #define ICMR   0x04