stdout-path = "serial0:115200n8";
};
+ aliases {
+ i2c0 = &cpm_i2c0;
+ spi0 = &cps_spi1;
+ };
+
memory@00000000 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
-&i2c0 {
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
status = "okay";
- clock-frequency = <100000>;
};
-&spi0 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
- };
- };
- };
+&ap_pinctl {
+ /* MPP Bus:
+ * SDIO [0-10]
+ * UART0 [11,19]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 1 1 1 1 1 1 1 1 1 1
+ 1 3 0 0 0 0 0 0 0 3 >;
};
-/* Accessible over the mini-USB CON9 connector on the main board */
-&uart0 {
- status = "okay";
+&cpm_pinctl {
+ /* MPP Bus:
+ * [0-31] = 0xff: Keep default CP0_shared_pins:
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32,34] SMI
+ * [31] GPIO: push button/Wake
+ * [35-36] GPIO
+ * [37-38] I2C
+ * [40-41] SATA[0/1]_PRESENT_ACTIVEn
+ * [42-43] XSMI
+ * [44-55] RGMII1
+ * [56-62] SD
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0 7 0 7 0 0 2 2 0
+ 0 0 8 8 1 1 1 1 1 1
+ 1 1 1 1 1 1 0xe 0xe 0xe 0xe
+ 0xe 0xe 0xe >;
};
-
/* CON5 on CP0 expansion */
&cpm_pcie2 {
status = "okay";
};
&cpm_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
status = "okay";
};
+&cps_pinctl {
+ /* MPP Bus:
+ * [0-11] RGMII0
+ * [13-16] SPI1
+ * [27,31] GE_MDIO/MDC
+ * [32-62] = 0xff: Keep default CP1_shared_pins:
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3
+ 0x3 0x3 0xff 0x3 0x3 0x3 0x3 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0xff 0xff
+ 0xff 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff >;
+};
+
/* CON5 on CP1 expansion */
&cps_pcie2 {
status = "okay";
};
-&cps_i2c0 {
+&cps_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_spi1_pins>;
status = "okay";
- clock-frequency = <100000>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
+ };
+ };
};
/* CON4 on CP1 expansion */
&cps_utmi0 {
status = "okay";
};
+
+&cpm_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpm_ethernet {
+ status = "okay";
+};
+
+&cpm_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};