rockchip: Update the sdram-channel property to support of-platdata

[u-boot] / arch / arm / dts / exynos5250-snow.dts

diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 35912526e71e32640f837fc2cb988f9cd758a419..29c13c1257e7773fe20c07a42c887b768100a875 100644 (file)
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -95,22 +95,6 @@
                };
        };
 
-
-       i2c4: i2c@12CA0000 {
-               cros_ec_old: cros-ec@1e {
-                       reg = <0x1e>;
-                       compatible = "google,cros-ec-i2c";
-                       i2c-max-frequency = <100000>;
-                       u-boot,i2c-offset-len = <0>;
-                       ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
-               };
-
-               power-regulator@48 {
-                       compatible = "ti,tps65090";
-                       reg = <0x48>;
-               };
-       };
-
        i2c-arbitrator {
                compatible = "i2c-arb-gpio-challenge";
                #address-cells = <1>;
@@ -206,6 +190,45 @@
                };
        };
 
+       i2c@12CD0000 {
+               ptn3460: lvds-bridge@20 {
+                       compatible = "nxp,ptn3460";
+                       reg = <0x20>;
+                       sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
+                       reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+                       hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+                       edid-emulation = <5>;
+
+                       ports {
+                               port@0 {
+                                       bridge_out: endpoint {
+                                               remote-endpoint = <&panel_in>;
+                                       };
+                               };
+
+                               port@1 {
+                                       bridge_in: endpoint {
+                                               remote-endpoint = <&dp_out>;
+                                       };
+                               };
+                       };
+               };
+
+               soundcodec@22 {
+                       reg = <0x22>;
+                       compatible = "maxim,max98095-codec";
+               };
+       };
+
+       i2c@12C90000 {
+               clock-frequency = <100000>;
+               tpm@20 {
+                       reg = <0x20>;
+                       u-boot,i2c-offset-len = <0>;
+                       compatible = "infineon,slb9635tt";
+               };
+       };
+
        spi@12d30000 {
                spi-max-frequency = <50000000>;
                firmware_storage_spi: flash@0 {
@@ -214,6 +237,27 @@
                };
        };
 
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm 0 1000000 0>;
+               brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+               default-brightness-level = <7>;
+               enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+               power-supply = <&fet1>;
+       };
+
+       panel: panel {
+               compatible = "auo,b116xw03";
+               power-supply = <&fet6>;
+               backlight = <&backlight>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&bridge_out>;
+                       };
+               };
+       };
+
        spi@131b0000 {
                spi-max-frequency = <1000000>;
                spi-deactivate-delay = <100>;
@@ -238,26 +282,6 @@
                status = "disabled";
        };
 
-       i2c@12CD0000 {
-               soundcodec@22 {
-                       reg = <0x22>;
-                       compatible = "maxim,max98095-codec";
-               };
-
-               ptn3460-bridge@20 {
-                       compatible = "nxp,ptn3460";
-                       reg = <0x20>;
-                       /*
-                        * TODO(sjg@chromium.org): Use GPIOs here
-                        * powerdown-gpio = <&gpy2 5 0>;
-                        * reset-gpio = <&gpx1 5 0>;
-                        * edid-emulation = <5>;
-                        * pinctrl-names = "default";
-                        * pinctrl-0 = <&ptn3460_gpios>;
-                        */
-               };
-       };
-
        i2c@12C60000 {
                max77686@09 {
                        reg = <0x9>;
@@ -348,6 +372,15 @@
                samsung,dynamic-range = <0>;
                samsung,ycbcr-coeff = <0>;
                samsung,color-depth = <1>;
+               samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+               ports {
+                       port@0 {
+                               dp_out: endpoint {
+                                       remote-endpoint = <&bridge_in>;
+                               };
+                       };
+               };
        };
 
 };