aspeed: Device Tree configuration for Reset Driver

[u-boot] / arch / arm / dts / exynos5250-snow.dts

diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 32c0098bd8be7138925d867a387cd31bd701a203..29c13c1257e7773fe20c07a42c887b768100a875 100644 (file)
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -198,6 +198,20 @@
                        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
                        hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
                        edid-emulation = <5>;
+
+                       ports {
+                               port@0 {
+                                       bridge_out: endpoint {
+                                               remote-endpoint = <&panel_in>;
+                                       };
+                               };
+
+                               port@1 {
+                                       bridge_in: endpoint {
+                                               remote-endpoint = <&dp_out>;
+                                       };
+                               };
+                       };
                };
 
                soundcodec@22 {
@@ -206,6 +220,15 @@
                };
        };
 
+       i2c@12C90000 {
+               clock-frequency = <100000>;
+               tpm@20 {
+                       reg = <0x20>;
+                       u-boot,i2c-offset-len = <0>;
+                       compatible = "infineon,slb9635tt";
+               };
+       };
+
        spi@12d30000 {
                spi-max-frequency = <50000000>;
                firmware_storage_spi: flash@0 {
@@ -214,6 +237,27 @@
                };
        };
 
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm 0 1000000 0>;
+               brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+               default-brightness-level = <7>;
+               enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+               power-supply = <&fet1>;
+       };
+
+       panel: panel {
+               compatible = "auo,b116xw03";
+               power-supply = <&fet6>;
+               backlight = <&backlight>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&bridge_out>;
+                       };
+               };
+       };
+
        spi@131b0000 {
                spi-max-frequency = <1000000>;
                spi-deactivate-delay = <100>;
@@ -328,6 +372,15 @@
                samsung,dynamic-range = <0>;
                samsung,ycbcr-coeff = <0>;
                samsung,color-depth = <1>;
+               samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+               ports {
+                       port@0 {
+                               dp_out: endpoint {
+                                       remote-endpoint = <&bridge_in>;
+                               };
+                       };
+               };
        };
 
 };