"google,peach", "samsung,exynos5420", "samsung,exynos5";
config {
- google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+ google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
hwid = "PIT TEST A-A 7848";
lazy-init = <1>;
};
aliases {
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
- pmic = "/i2c@12ca0000";
- };
-
- cros-ec-keyb {
- compatible = "google,cros-ec-keyb";
- google,key-rows = <8>;
- google,key-columns = <13>;
- google,repeat-delay-ms = <240>;
- google,repeat-rate-ms = <30>;
- google,ghost-filter;
- /*
- * Keymap entries take the form of 0xRRCCKKKK where
- * RR=Row CC=Column KKKK=Key Code
- * The values below are for a US keyboard layout and
- * are taken from the Linux driver. Note that the
- * 102ND key is not used for US keyboards.
- */
- linux,keymap = <
- /* CAPSLCK F1 B F10 */
- 0x0001003a 0x0002003b 0x00030030 0x00040044
- /* N = R_ALT ESC */
- 0x00060031 0x0008000d 0x000a0064 0x01010001
- /* F4 G F7 H */
- 0x0102003e 0x01030022 0x01040041 0x01060023
- /* ' F9 BKSPACE L_CTRL */
- 0x01080028 0x01090043 0x010b000e 0x0200001d
- /* TAB F3 T F6 */
- 0x0201000f 0x0202003d 0x02030014 0x02040040
- /* ] Y 102ND [ */
- 0x0205001b 0x02060015 0x02070056 0x0208001a
- /* F8 GRAVE F2 5 */
- 0x02090042 0x03010029 0x0302003c 0x03030006
- /* F5 6 - \ */
- 0x0304003f 0x03060007 0x0308000c 0x030b002b
- /* R_CTRL A D F */
- 0x04000061 0x0401001e 0x04020020 0x04030021
- /* S K J ; */
- 0x0404001f 0x04050025 0x04060024 0x04080027
- /* L ENTER Z C */
- 0x04090026 0x040b001c 0x0501002c 0x0502002e
- /* V X , M */
- 0x0503002f 0x0504002d 0x05050033 0x05060032
- /* L_SHIFT / . SPACE */
- 0x0507002a 0x05080035 0x05090034 0x050B0039
- /* 1 3 4 2 */
- 0x06010002 0x06020004 0x06030005 0x06040003
- /* 8 7 0 9 */
- 0x06050009 0x06060008 0x0608000b 0x0609000a
- /* L_ALT DOWN RIGHT Q */
- 0x060a0038 0x060b006c 0x060c006a 0x07010010
- /* E R W I */
- 0x07020012 0x07030013 0x07040011 0x07050017
- /* U R_SHIFT P O */
- 0x07060016 0x07070036 0x07080019 0x07090018
- /* UP LEFT */
- 0x070b0067 0x070c0069>;
+ pmic = "/i2c@12CA0000";
+ i2c104 = &i2c_tunnel;
};
dmc {
};
/* MAX77802 is on i2c bus 4 */
- i2c@12ca0000 {
+ i2c@12CA0000 {
clock-frequency = <400000>;
power-regulator@9 {
compatible = "maxim,max77802-pmic";
};
};
- i2c@12cd0000 { /* i2c7 */
+ i2c@12CD0000 { /* i2c7 */
clock-frequency = <100000>;
soundcodec@20 {
reg = <0x20>;
edp-lvds-bridge@48 {
compatible = "parade,ps8625";
reg = <0x48>;
+ sleep-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&gpy7 7 GPIO_ACTIVE_HIGH>;
};
};
samsung,codec-type = "max98090";
};
- i2c@12e10000 { /* i2c9 */
+ i2c@12E10000 { /* i2c9 */
clock-frequency = <400000>;
tpm@20 {
- compatible = "infineon,slb9645-tpm";
+ compatible = "infineon,slb9645tt";
reg = <0x20>;
};
};
};
};
- spi@12d40000 { /* spi2 */
- spi-max-frequency = <4000000>;
- spi-deactivate-delay = <200>;
- cros-ec@0 {
- reg = <0>;
- compatible = "google,cros-ec";
- spi-half-duplex;
- spi-max-timeout-ms = <1100>;
- spi-frame-header = <0xec>;
- ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
-
- /*
- * This describes the flash memory within the EC. Note
- * that the STM32L flash erases to 0, not 0xff.
- */
- #address-cells = <1>;
- #size-cells = <1>;
- flash@8000000 {
- reg = <0x08000000 0x20000>;
- erase-value = <0>;
- };
- };
- };
-
xhci@12000000 {
- samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+ samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
};
xhci@12400000 {
- samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+ samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
};
fimd@14400000 {
samsung,dual-lcd-enabled = <0>;
};
};
+
+&spi_2 {
+ spi-max-frequency = <3125000>;
+ spi-deactivate-delay = <200>;
+ status = "okay";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ cs-gpios = <&gpb1 2 0>;
+
+ cros_ec: cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ reg = <0>;
+ spi-half-duplex;
+ spi-max-timeout-ms = <1100>;
+ ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * This describes the flash memory within the EC. Note
+ * that the STM32L flash erases to 0, not 0xff.
+ */
+ flash@8000000 {
+ reg = <0x08000000 0x20000>;
+ erase-value = <0>;
+ };
+
+ controller-data {
+ samsung,spi-feedback-delay = <1>;
+ };
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ google,remote-bus = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ sbs,i2c-retry-count = <2>;
+ };
+
+ power-regulator@48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ regulators {
+ tps65090_dcdc1: dcdc1 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc2: dcdc2 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc3: dcdc3 {
+ ti,enable-ext-control;
+ };
+ tps65090_fet1: fet1 {
+ regulator-name = "vcd_led";
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ };
+ tps65090_fet3: fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ };
+ tps65090_fet4: fet4 {
+ regulator-name = "sdcard";
+ regulator-always-on;
+ };
+ tps65090_fet5: fet5 {
+ regulator-name = "camout";
+ regulator-always-on;
+ };
+ tps65090_fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ };
+ tps65090_ldo1: ldo1 {
+ };
+ tps65090_ldo2: ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
+ };
+ };
+};
+
+#include "cros-ec-keyboard.dtsi"
projects / u-boot / blobdiff